openwrt/package/kernel/mac80211/patches/300-pending_work.patch

4418 lines
137 KiB
Diff

--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1351,12 +1351,12 @@ static int ath10k_update_channel_list(st
ch->allow_vht = true;
ch->allow_ibss =
- !(channel->flags & IEEE80211_CHAN_NO_IBSS);
+ !(channel->flags & IEEE80211_CHAN_NO_IR);
ch->ht40plus =
!(channel->flags & IEEE80211_CHAN_NO_HT40PLUS);
- passive = channel->flags & IEEE80211_CHAN_PASSIVE_SCAN;
+ passive = channel->flags & IEEE80211_CHAN_NO_IR;
ch->passive = passive;
ch->freq = channel->center_freq;
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -90,7 +90,7 @@ config ATH9K_DFS_CERTIFIED
config ATH9K_TX99
bool "Atheros ath9k TX99 testing support"
- depends on CFG80211_CERTIFICATION_ONUS
+ depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
default n
---help---
Say N. This should only be enabled on systems undergoing
@@ -108,6 +108,14 @@ config ATH9K_TX99
be evaluated to meet the RF exposure limits set forth in the
governmental SAR regulations.
+config ATH9K_WOW
+ bool "Wake on Wireless LAN support (EXPERIMENTAL)"
+ depends on ATH9K && PM
+ default n
+ ---help---
+ This option enables Wake on Wireless LAN support for certain cards.
+ Currently, AR9462 is supported.
+
config ATH9K_LEGACY_RATE_CONTROL
bool "Atheros ath9k rate control"
depends on ATH9K
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -13,9 +13,9 @@ ath9k-$(CPTCFG_ATH9K_PCI) += pci.o
ath9k-$(CPTCFG_ATH9K_AHB) += ahb.o
ath9k-$(CPTCFG_ATH9K_DEBUGFS) += debug.o
ath9k-$(CPTCFG_ATH9K_DFS_DEBUGFS) += dfs_debug.o
-ath9k-$(CPTCFG_ATH9K_DFS_CERTIFIED) += \
- dfs.o
-ath9k-$(CONFIG_PM_SLEEP) += wow.o
+ath9k-$(CPTCFG_ATH9K_DFS_CERTIFIED) += dfs.o
+ath9k-$(CPTCFG_ATH9K_TX99) += tx99.o
+ath9k-$(CPTCFG_ATH9K_WOW) += wow.o
obj-$(CPTCFG_ATH9K) += ath9k.o
@@ -41,6 +41,8 @@ ath9k_hw-y:= \
ar9003_eeprom.o \
ar9003_paprd.o
+ath9k_hw-$(CPTCFG_ATH9K_WOW) += ar9003_wow.o
+
ath9k_hw-$(CPTCFG_ATH9K_BTCOEX_SUPPORT) += btcoex.o \
ar9003_mci.o
obj-$(CPTCFG_ATH9K_HW) += ath9k_hw.o
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -581,6 +581,13 @@ static void ar9003_tx_gain_table_mode6(s
ar9580_1p0_type6_tx_gain_table);
}
+static void ar9003_tx_gain_table_mode7(struct ath_hw *ah)
+{
+ if (AR_SREV_9340(ah))
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9340_cus227_tx_gain_table_1p0);
+}
+
typedef void (*ath_txgain_tab)(struct ath_hw *ah);
static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
@@ -593,6 +600,7 @@ static void ar9003_tx_gain_table_apply(s
ar9003_tx_gain_table_mode4,
ar9003_tx_gain_table_mode5,
ar9003_tx_gain_table_mode6,
+ ar9003_tx_gain_table_mode7,
};
int idx = ar9003_hw_get_tx_gain_idx(ah);
@@ -750,6 +758,9 @@ static void ar9003_hw_init_mode_gain_reg
static void ar9003_hw_configpcipowersave(struct ath_hw *ah,
bool power_off)
{
+ unsigned int i;
+ struct ar5416IniArray *array;
+
/*
* Increase L1 Entry Latency. Some WB222 boards don't have
* this change in eeprom/OTP.
@@ -775,18 +786,13 @@ static void ar9003_hw_configpcipowersave
* Configire PCIE after Ini init. SERDES values now come from ini file
* This enables PCIe low power mode.
*/
- if (ah->config.pcieSerDesWrite) {
- unsigned int i;
- struct ar5416IniArray *array;
-
- array = power_off ? &ah->iniPcieSerdes :
- &ah->iniPcieSerdesLowPower;
-
- for (i = 0; i < array->ia_rows; i++) {
- REG_WRITE(ah,
- INI_RA(array, i, 0),
- INI_RA(array, i, 1));
- }
+ array = power_off ? &ah->iniPcieSerdes :
+ &ah->iniPcieSerdesLowPower;
+
+ for (i = 0; i < array->ia_rows; i++) {
+ REG_WRITE(ah,
+ INI_RA(array, i, 0),
+ INI_RA(array, i, 1));
}
}
--- a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
@@ -1447,4 +1447,106 @@ static const u32 ar9340_1p0_soc_preamble
{0x00007038, 0x000004c2},
};
+static const u32 ar9340_cus227_tx_gain_table_1p0[][5] = {
+ /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
+ {0x0000a2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+ {0x0000a2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+ {0x0000a2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
+ {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
+ {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
+ {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
+ {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004},
+ {0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200},
+ {0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202},
+ {0x0000a514, 0x1c000223, 0x1c000223, 0x11000400, 0x11000400},
+ {0x0000a518, 0x21002220, 0x21002220, 0x15000402, 0x15000402},
+ {0x0000a51c, 0x27002223, 0x27002223, 0x19000404, 0x19000404},
+ {0x0000a520, 0x2c022220, 0x2c022220, 0x1b000603, 0x1b000603},
+ {0x0000a524, 0x30022222, 0x30022222, 0x1f000a02, 0x1f000a02},
+ {0x0000a528, 0x35022225, 0x35022225, 0x23000a04, 0x23000a04},
+ {0x0000a52c, 0x3b02222a, 0x3b02222a, 0x26000a20, 0x26000a20},
+ {0x0000a530, 0x3f02222c, 0x3f02222c, 0x2a000e20, 0x2a000e20},
+ {0x0000a534, 0x4202242a, 0x4202242a, 0x2e000e22, 0x2e000e22},
+ {0x0000a538, 0x4702244a, 0x4702244a, 0x31000e24, 0x31000e24},
+ {0x0000a53c, 0x4b02244c, 0x4b02244c, 0x34001640, 0x34001640},
+ {0x0000a540, 0x4e02246c, 0x4e02246c, 0x38001660, 0x38001660},
+ {0x0000a544, 0x5302266c, 0x5302266c, 0x3b001861, 0x3b001861},
+ {0x0000a548, 0x5702286c, 0x5702286c, 0x3e001a81, 0x3e001a81},
+ {0x0000a54c, 0x5c02486b, 0x5c02486b, 0x42001a83, 0x42001a83},
+ {0x0000a550, 0x61024a6c, 0x61024a6c, 0x44001c84, 0x44001c84},
+ {0x0000a554, 0x66026a6c, 0x66026a6c, 0x48001ce3, 0x48001ce3},
+ {0x0000a558, 0x6b026e6c, 0x6b026e6c, 0x4c001ce5, 0x4c001ce5},
+ {0x0000a55c, 0x7002708c, 0x7002708c, 0x50001ce9, 0x50001ce9},
+ {0x0000a560, 0x7302b08a, 0x7302b08a, 0x54001ceb, 0x54001ceb},
+ {0x0000a564, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
+ {0x0000a568, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
+ {0x0000a56c, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
+ {0x0000a570, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
+ {0x0000a574, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
+ {0x0000a578, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
+ {0x0000a57c, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
+ {0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000},
+ {0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002},
+ {0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004},
+ {0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200},
+ {0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202},
+ {0x0000a594, 0x1c800223, 0x1c800223, 0x11800400, 0x11800400},
+ {0x0000a598, 0x21820220, 0x21820220, 0x15800402, 0x15800402},
+ {0x0000a59c, 0x27820223, 0x27820223, 0x19800404, 0x19800404},
+ {0x0000a5a0, 0x2b822220, 0x2b822220, 0x1b800603, 0x1b800603},
+ {0x0000a5a4, 0x2f822222, 0x2f822222, 0x1f800a02, 0x1f800a02},
+ {0x0000a5a8, 0x34822225, 0x34822225, 0x23800a04, 0x23800a04},
+ {0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x26800a20, 0x26800a20},
+ {0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2a800e20, 0x2a800e20},
+ {0x0000a5b4, 0x4282242a, 0x4282242a, 0x2e800e22, 0x2e800e22},
+ {0x0000a5b8, 0x4782244a, 0x4782244a, 0x31800e24, 0x31800e24},
+ {0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x34801640, 0x34801640},
+ {0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x38801660, 0x38801660},
+ {0x0000a5c4, 0x5382266c, 0x5382266c, 0x3b801861, 0x3b801861},
+ {0x0000a5c8, 0x5782286c, 0x5782286c, 0x3e801a81, 0x3e801a81},
+ {0x0000a5cc, 0x5c84286b, 0x5c84286b, 0x42801a83, 0x42801a83},
+ {0x0000a5d0, 0x61842a6c, 0x61842a6c, 0x44801c84, 0x44801c84},
+ {0x0000a5d4, 0x66862a6c, 0x66862a6c, 0x48801ce3, 0x48801ce3},
+ {0x0000a5d8, 0x6b862e6c, 0x6b862e6c, 0x4c801ce5, 0x4c801ce5},
+ {0x0000a5dc, 0x7086308c, 0x7086308c, 0x50801ce9, 0x50801ce9},
+ {0x0000a5e0, 0x738a308a, 0x738a308a, 0x54801ceb, 0x54801ceb},
+ {0x0000a5e4, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x0000a5e8, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x0000a5ec, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x0000a5f0, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x0000a5f4, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x0000a5f8, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x0000a5fc, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a614, 0x01404000, 0x01404000, 0x01404000, 0x01404000},
+ {0x0000a618, 0x01404501, 0x01404501, 0x01404501, 0x01404501},
+ {0x0000a61c, 0x02008802, 0x02008802, 0x02008501, 0x02008501},
+ {0x0000a620, 0x0300cc03, 0x0300cc03, 0x0280ca03, 0x0280ca03},
+ {0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04},
+ {0x0000a628, 0x0300cc03, 0x0300cc03, 0x04014c04, 0x04014c04},
+ {0x0000a62c, 0x03810c03, 0x03810c03, 0x04015005, 0x04015005},
+ {0x0000a630, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+ {0x0000a634, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+ {0x0000a638, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+ {0x0000a63c, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+ {0x0000b2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+ {0x0000b2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+ {0x0000b2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
+ {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
+ {0x00016044, 0x056db2db, 0x056db2db, 0x03b6d2e4, 0x03b6d2e4},
+ {0x00016048, 0x24925666, 0x24925666, 0x8e481266, 0x8e481266},
+ {0x00016280, 0x01000015, 0x01000015, 0x01001015, 0x01001015},
+ {0x00016288, 0x30318000, 0x30318000, 0x00318000, 0x00318000},
+ {0x00016444, 0x056db2db, 0x056db2db, 0x03b6d2e4, 0x03b6d2e4},
+ {0x00016448, 0x24925666, 0x24925666, 0x8e481266, 0x8e481266},
+ {0x0000a3a4, 0x00000011, 0x00000011, 0x00000011, 0x00000011},
+ {0x0000a3a8, 0x3c3c3c3c, 0x3c3c3c3c, 0x3c3c3c3c, 0x3c3c3c3c},
+ {0x0000a3ac, 0x30303030, 0x30303030, 0x30303030, 0x30303030},
+};
+
#endif /* INITVALS_9340_H */
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -459,6 +459,7 @@ void ath_check_ani(struct ath_softc *sc)
int ath_update_survey_stats(struct ath_softc *sc);
void ath_update_survey_nf(struct ath_softc *sc, int channel);
void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type);
+void ath_ps_full_sleep(unsigned long data);
/**********/
/* BTCOEX */
@@ -570,6 +571,34 @@ static inline void ath_fill_led_pin(stru
}
#endif
+/************************/
+/* Wake on Wireless LAN */
+/************************/
+
+#ifdef CONFIG_ATH9K_WOW
+void ath9k_init_wow(struct ieee80211_hw *hw);
+int ath9k_suspend(struct ieee80211_hw *hw,
+ struct cfg80211_wowlan *wowlan);
+int ath9k_resume(struct ieee80211_hw *hw);
+void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled);
+#else
+static inline void ath9k_init_wow(struct ieee80211_hw *hw)
+{
+}
+static inline int ath9k_suspend(struct ieee80211_hw *hw,
+ struct cfg80211_wowlan *wowlan)
+{
+ return 0;
+}
+static inline int ath9k_resume(struct ieee80211_hw *hw)
+{
+ return 0;
+}
+static inline void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
+{
+}
+#endif /* CONFIG_ATH9K_WOW */
+
/*******************************/
/* Antenna diversity/combining */
/*******************************/
@@ -723,6 +752,7 @@ struct ath_softc {
struct work_struct hw_check_work;
struct work_struct hw_reset_work;
struct completion paprd_complete;
+ wait_queue_head_t tx_wait;
unsigned int hw_busy_count;
unsigned long sc_flags;
@@ -759,6 +789,7 @@ struct ath_softc {
struct delayed_work tx_complete_work;
struct delayed_work hw_pll_work;
struct timer_list rx_poll_timer;
+ struct timer_list sleep_timer;
#ifdef CPTCFG_ATH9K_BTCOEX_SUPPORT
struct ath_btcoex btcoex;
@@ -783,7 +814,7 @@ struct ath_softc {
bool tx99_state;
s16 tx99_power;
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_ATH9K_WOW
atomic_t wow_got_bmiss_intr;
atomic_t wow_sleep_proc_intr; /* in the middle of WoW sleep ? */
u32 wow_intr_before_sleep;
@@ -946,10 +977,25 @@ struct fft_sample_ht20_40 {
u8 data[SPECTRAL_HT20_40_NUM_BINS];
} __packed;
-int ath9k_tx99_init(struct ath_softc *sc);
-void ath9k_tx99_deinit(struct ath_softc *sc);
+/********/
+/* TX99 */
+/********/
+
+#ifdef CONFIG_ATH9K_TX99
+void ath9k_tx99_init_debug(struct ath_softc *sc);
int ath9k_tx99_send(struct ath_softc *sc, struct sk_buff *skb,
struct ath_tx_control *txctl);
+#else
+static inline void ath9k_tx99_init_debug(struct ath_softc *sc)
+{
+}
+static inline int ath9k_tx99_send(struct ath_softc *sc,
+ struct sk_buff *skb,
+ struct ath_tx_control *txctl)
+{
+ return 0;
+}
+#endif /* CONFIG_ATH9K_TX99 */
void ath9k_tasklet(unsigned long data);
int ath_cabq_update(struct ath_softc *);
@@ -966,6 +1012,9 @@ extern bool is_ath9k_unloaded;
u8 ath9k_parse_mpdudensity(u8 mpdudensity);
irqreturn_t ath_isr(int irq, void *dev);
+int ath_reset(struct ath_softc *sc);
+void ath_cancel_work(struct ath_softc *sc);
+void ath_restart_work(struct ath_softc *sc);
int ath9k_init_device(u16 devid, struct ath_softc *sc,
const struct ath_bus_ops *bus_ops);
void ath9k_deinit_device(struct ath_softc *sc);
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1782,111 +1782,6 @@ void ath9k_deinit_debug(struct ath_softc
}
}
-static ssize_t read_file_tx99(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ath_softc *sc = file->private_data;
- char buf[3];
- unsigned int len;
-
- len = sprintf(buf, "%d\n", sc->tx99_state);
- return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-}
-
-static ssize_t write_file_tx99(struct file *file, const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ath_softc *sc = file->private_data;
- struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- char buf[32];
- bool start;
- ssize_t len;
- int r;
-
- if (sc->nvifs > 1)
- return -EOPNOTSUPP;
-
- len = min(count, sizeof(buf) - 1);
- if (copy_from_user(buf, user_buf, len))
- return -EFAULT;
-
- if (strtobool(buf, &start))
- return -EINVAL;
-
- if (start == sc->tx99_state) {
- if (!start)
- return count;
- ath_dbg(common, XMIT, "Resetting TX99\n");
- ath9k_tx99_deinit(sc);
- }
-
- if (!start) {
- ath9k_tx99_deinit(sc);
- return count;
- }
-
- r = ath9k_tx99_init(sc);
- if (r)
- return r;
-
- return count;
-}
-
-static const struct file_operations fops_tx99 = {
- .read = read_file_tx99,
- .write = write_file_tx99,
- .open = simple_open,
- .owner = THIS_MODULE,
- .llseek = default_llseek,
-};
-
-static ssize_t read_file_tx99_power(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ath_softc *sc = file->private_data;
- char buf[32];
- unsigned int len;
-
- len = sprintf(buf, "%d (%d dBm)\n",
- sc->tx99_power,
- sc->tx99_power / 2);
-
- return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-}
-
-static ssize_t write_file_tx99_power(struct file *file,
- const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ath_softc *sc = file->private_data;
- int r;
- u8 tx_power;
-
- r = kstrtou8_from_user(user_buf, count, 0, &tx_power);
- if (r)
- return r;
-
- if (tx_power > MAX_RATE_POWER)
- return -EINVAL;
-
- sc->tx99_power = tx_power;
-
- ath9k_ps_wakeup(sc);
- ath9k_hw_tx99_set_txpower(sc->sc_ah, sc->tx99_power);
- ath9k_ps_restore(sc);
-
- return count;
-}
-
-static const struct file_operations fops_tx99_power = {
- .read = read_file_tx99_power,
- .write = write_file_tx99_power,
- .open = simple_open,
- .owner = THIS_MODULE,
- .llseek = default_llseek,
-};
-
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
@@ -1903,6 +1798,7 @@ int ath9k_init_debug(struct ath_hw *ah)
#endif
ath9k_dfs_init_debug(sc);
+ ath9k_tx99_init_debug(sc);
debugfs_create_file("dma", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_dma);
@@ -1978,15 +1874,6 @@ int ath9k_init_debug(struct ath_hw *ah)
debugfs_create_file("btcoex", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_btcoex);
#endif
- if (config_enabled(CPTCFG_ATH9K_TX99) &&
- AR_SREV_9300_20_OR_LATER(ah)) {
- debugfs_create_file("tx99", S_IRUSR | S_IWUSR,
- sc->debug.debugfs_phy, sc,
- &fops_tx99);
- debugfs_create_file("tx99_power", S_IRUSR | S_IWUSR,
- sc->debug.debugfs_phy, sc,
- &fops_tx99_power);
- }
return 0;
}
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -454,7 +454,6 @@ static void ath9k_hw_init_config(struct
}
ah->config.rx_intr_mitigation = true;
- ah->config.pcieSerDesWrite = true;
/*
* We need this for PCI devices only (Cardbus, PCI, miniPCI)
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -283,7 +283,6 @@ struct ath9k_ops_config {
int additional_swba_backoff;
int ack_6mb;
u32 cwm_ignore_extcca;
- bool pcieSerDesWrite;
u8 pcie_clock_req;
u32 pcie_waen;
u8 analog_shiftreg;
@@ -920,7 +919,7 @@ struct ath_hw {
/* Enterprise mode cap */
u32 ent_mode;
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_ATH9K_WOW
u32 wow_event_mask;
#endif
bool is_clk_25mhz;
@@ -1126,7 +1125,7 @@ ath9k_hw_get_btcoex_scheme(struct ath_hw
#endif /* CPTCFG_ATH9K_BTCOEX_SUPPORT */
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_ATH9K_WOW
const char *ath9k_hw_wow_event_to_string(u32 wow_event);
void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
u8 *user_mask, int pattern_count,
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -683,6 +683,7 @@ static int ath9k_init_softc(u16 devid, s
common = ath9k_hw_common(ah);
sc->dfs_detector = dfs_pattern_detector_init(common, NL80211_DFS_UNSET);
sc->tx99_power = MAX_RATE_POWER + 1;
+ init_waitqueue_head(&sc->tx_wait);
if (!pdata) {
ah->ah_flags |= AH_USE_EEPROM;
@@ -730,6 +731,7 @@ static int ath9k_init_softc(u16 devid, s
tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet,
(unsigned long)sc);
+ setup_timer(&sc->sleep_timer, ath_ps_full_sleep, (unsigned long)sc);
INIT_WORK(&sc->hw_reset_work, ath_reset_work);
INIT_WORK(&sc->hw_check_work, ath_hw_check);
INIT_WORK(&sc->paprd_work, ath_paprd_calibrate);
@@ -845,7 +847,8 @@ static const struct ieee80211_iface_limi
};
static const struct ieee80211_iface_limit if_dfs_limits[] = {
- { .max = 1, .types = BIT(NL80211_IFTYPE_AP) },
+ { .max = 1, .types = BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_ADHOC) },
};
static const struct ieee80211_iface_combination if_comb[] = {
@@ -862,20 +865,11 @@ static const struct ieee80211_iface_comb
.max_interfaces = 1,
.num_different_channels = 1,
.beacon_int_infra_match = true,
- .radar_detect_widths = BIT(NL80211_CHAN_NO_HT) |
- BIT(NL80211_CHAN_HT20),
+ .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
+ BIT(NL80211_CHAN_WIDTH_20),
}
};
-#ifdef CONFIG_PM
-static const struct wiphy_wowlan_support ath9k_wowlan_support = {
- .flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
- .n_patterns = MAX_NUM_USER_PATTERN,
- .pattern_min_len = 1,
- .pattern_max_len = MAX_PATTERN_SIZE,
-};
-#endif
-
void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
{
struct ath_hw *ah = sc->sc_ah;
@@ -925,16 +919,6 @@ void ath9k_set_hw_capab(struct ath_softc
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
-#ifdef CONFIG_PM_SLEEP
- if ((ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) &&
- (sc->driver_data & ATH9K_PCI_WOW) &&
- device_can_wakeup(sc->dev))
- hw->wiphy->wowlan = &ath9k_wowlan_support;
-
- atomic_set(&sc->wow_sleep_proc_intr, -1);
- atomic_set(&sc->wow_got_bmiss_intr, -1);
-#endif
-
hw->queues = 4;
hw->max_rates = 4;
hw->channel_change_time = 5000;
@@ -960,6 +944,7 @@ void ath9k_set_hw_capab(struct ath_softc
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&sc->sbands[IEEE80211_BAND_5GHZ];
+ ath9k_init_wow(hw);
ath9k_reload_chainmask_settings(sc);
SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
@@ -1058,6 +1043,7 @@ static void ath9k_deinit_softc(struct at
if (ATH_TXQ_SETUP(sc, i))
ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+ del_timer_sync(&sc->sleep_timer);
ath9k_hw_deinit(sc->sc_ah);
if (sc->dfs_detector != NULL)
sc->dfs_detector->exit(sc->dfs_detector);
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -82,6 +82,22 @@ static bool ath9k_setpower(struct ath_so
return ret;
}
+void ath_ps_full_sleep(unsigned long data)
+{
+ struct ath_softc *sc = (struct ath_softc *) data;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ bool reset;
+
+ spin_lock(&common->cc_lock);
+ ath_hw_cycle_counters_update(common);
+ spin_unlock(&common->cc_lock);
+
+ ath9k_hw_setrxabort(sc->sc_ah, 1);
+ ath9k_hw_stopdmarecv(sc->sc_ah, &reset);
+
+ ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
+}
+
void ath9k_ps_wakeup(struct ath_softc *sc)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
@@ -92,6 +108,7 @@ void ath9k_ps_wakeup(struct ath_softc *s
if (++sc->ps_usecount != 1)
goto unlock;
+ del_timer_sync(&sc->sleep_timer);
power_mode = sc->sc_ah->power_mode;
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
@@ -117,17 +134,17 @@ void ath9k_ps_restore(struct ath_softc *
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
enum ath9k_power_mode mode;
unsigned long flags;
- bool reset;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if (--sc->ps_usecount != 0)
goto unlock;
if (sc->ps_idle) {
- ath9k_hw_setrxabort(sc->sc_ah, 1);
- ath9k_hw_stopdmarecv(sc->sc_ah, &reset);
- mode = ATH9K_PM_FULL_SLEEP;
- } else if (sc->ps_enabled &&
+ mod_timer(&sc->sleep_timer, jiffies + HZ / 10);
+ goto unlock;
+ }
+
+ if (sc->ps_enabled &&
!(sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
@@ -163,13 +180,13 @@ static void __ath_cancel_work(struct ath
#endif
}
-static void ath_cancel_work(struct ath_softc *sc)
+void ath_cancel_work(struct ath_softc *sc)
{
__ath_cancel_work(sc);
cancel_work_sync(&sc->hw_reset_work);
}
-static void ath_restart_work(struct ath_softc *sc)
+void ath_restart_work(struct ath_softc *sc)
{
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
@@ -487,6 +504,8 @@ void ath9k_tasklet(unsigned long data)
ath_tx_edma_tasklet(sc);
else
ath_tx_tasklet(sc);
+
+ wake_up(&sc->tx_wait);
}
ath9k_btcoex_handle_interrupt(sc, status);
@@ -579,7 +598,8 @@ irqreturn_t ath_isr(int irq, void *dev)
goto chip_reset;
}
-#ifdef CONFIG_PM_SLEEP
+
+#ifdef CONFIG_ATH9K_WOW
if (status & ATH9K_INT_BMISS) {
if (atomic_read(&sc->wow_sleep_proc_intr) == 0) {
ath_dbg(common, ANY, "during WoW we got a BMISS\n");
@@ -588,6 +608,8 @@ irqreturn_t ath_isr(int irq, void *dev)
}
}
#endif
+
+
if (status & ATH9K_INT_SWBA)
tasklet_schedule(&sc->bcon_tasklet);
@@ -627,7 +649,7 @@ chip_reset:
#undef SCHED_INTR
}
-static int ath_reset(struct ath_softc *sc)
+int ath_reset(struct ath_softc *sc)
{
int r;
@@ -1817,13 +1839,31 @@ static void ath9k_set_coverage_class(str
mutex_unlock(&sc->mutex);
}
+static bool ath9k_has_tx_pending(struct ath_softc *sc)
+{
+ int i, npend;
+
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+ if (!ATH_TXQ_SETUP(sc, i))
+ continue;
+
+ if (!sc->tx.txq[i].axq_depth)
+ continue;
+
+ npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i]);
+ if (npend)
+ break;
+ }
+
+ return !!npend;
+}
+
static void ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
- int timeout = 200; /* ms */
- int i, j;
+ int timeout = HZ / 5; /* 200 ms */
bool drain_txq;
mutex_lock(&sc->mutex);
@@ -1841,25 +1881,9 @@ static void ath9k_flush(struct ieee80211
return;
}
- for (j = 0; j < timeout; j++) {
- bool npend = false;
-
- if (j)
- usleep_range(1000, 2000);
-
- for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
- if (!ATH_TXQ_SETUP(sc, i))
- continue;
-
- npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i]);
-
- if (npend)
- break;
- }
-
- if (!npend)
- break;
- }
+ if (wait_event_timeout(sc->tx_wait, !ath9k_has_tx_pending(sc),
+ timeout) > 0)
+ drop = false;
if (drop) {
ath9k_ps_wakeup(sc);
@@ -2021,333 +2045,6 @@ static int ath9k_get_antenna(struct ieee
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-
-static void ath9k_wow_map_triggers(struct ath_softc *sc,
- struct cfg80211_wowlan *wowlan,
- u32 *wow_triggers)
-{
- if (wowlan->disconnect)
- *wow_triggers |= AH_WOW_LINK_CHANGE |
- AH_WOW_BEACON_MISS;
- if (wowlan->magic_pkt)
- *wow_triggers |= AH_WOW_MAGIC_PATTERN_EN;
-
- if (wowlan->n_patterns)
- *wow_triggers |= AH_WOW_USER_PATTERN_EN;
-
- sc->wow_enabled = *wow_triggers;
-
-}
-
-static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- int pattern_count = 0;
- int i, byte_cnt;
- u8 dis_deauth_pattern[MAX_PATTERN_SIZE];
- u8 dis_deauth_mask[MAX_PATTERN_SIZE];
-
- memset(dis_deauth_pattern, 0, MAX_PATTERN_SIZE);
- memset(dis_deauth_mask, 0, MAX_PATTERN_SIZE);
-
- /*
- * Create Dissassociate / Deauthenticate packet filter
- *
- * 2 bytes 2 byte 6 bytes 6 bytes 6 bytes
- * +--------------+----------+---------+--------+--------+----
- * + Frame Control+ Duration + DA + SA + BSSID +
- * +--------------+----------+---------+--------+--------+----
- *
- * The above is the management frame format for disassociate/
- * deauthenticate pattern, from this we need to match the first byte
- * of 'Frame Control' and DA, SA, and BSSID fields
- * (skipping 2nd byte of FC and Duration feild.
- *
- * Disassociate pattern
- * --------------------
- * Frame control = 00 00 1010
- * DA, SA, BSSID = x:x:x:x:x:x
- * Pattern will be A0000000 | x:x:x:x:x:x | x:x:x:x:x:x
- * | x:x:x:x:x:x -- 22 bytes
- *
- * Deauthenticate pattern
- * ----------------------
- * Frame control = 00 00 1100
- * DA, SA, BSSID = x:x:x:x:x:x
- * Pattern will be C0000000 | x:x:x:x:x:x | x:x:x:x:x:x
- * | x:x:x:x:x:x -- 22 bytes
- */
-
- /* Create Disassociate Pattern first */
-
- byte_cnt = 0;
-
- /* Fill out the mask with all FF's */
-
- for (i = 0; i < MAX_PATTERN_MASK_SIZE; i++)
- dis_deauth_mask[i] = 0xff;
-
- /* copy the first byte of frame control field */
- dis_deauth_pattern[byte_cnt] = 0xa0;
- byte_cnt++;
-
- /* skip 2nd byte of frame control and Duration field */
- byte_cnt += 3;
-
- /*
- * need not match the destination mac address, it can be a broadcast
- * mac address or an unicast to this station
- */
- byte_cnt += 6;
-
- /* copy the source mac address */
- memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
-
- byte_cnt += 6;
-
- /* copy the bssid, its same as the source mac address */
-
- memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
-
- /* Create Disassociate pattern mask */
-
- dis_deauth_mask[0] = 0xfe;
- dis_deauth_mask[1] = 0x03;
- dis_deauth_mask[2] = 0xc0;
-
- ath_dbg(common, WOW, "Adding disassoc/deauth patterns for WoW\n");
-
- ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
- pattern_count, byte_cnt);
-
- pattern_count++;
- /*
- * for de-authenticate pattern, only the first byte of the frame
- * control field gets changed from 0xA0 to 0xC0
- */
- dis_deauth_pattern[0] = 0xC0;
-
- ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
- pattern_count, byte_cnt);
-
-}
-
-static void ath9k_wow_add_pattern(struct ath_softc *sc,
- struct cfg80211_wowlan *wowlan)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ath9k_wow_pattern *wow_pattern = NULL;
- struct cfg80211_pkt_pattern *patterns = wowlan->patterns;
- int mask_len;
- s8 i = 0;
-
- if (!wowlan->n_patterns)
- return;
-
- /*
- * Add the new user configured patterns
- */
- for (i = 0; i < wowlan->n_patterns; i++) {
-
- wow_pattern = kzalloc(sizeof(*wow_pattern), GFP_KERNEL);
-
- if (!wow_pattern)
- return;
-
- /*
- * TODO: convert the generic user space pattern to
- * appropriate chip specific/802.11 pattern.
- */
-
- mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8);
- memset(wow_pattern->pattern_bytes, 0, MAX_PATTERN_SIZE);
- memset(wow_pattern->mask_bytes, 0, MAX_PATTERN_SIZE);
- memcpy(wow_pattern->pattern_bytes, patterns[i].pattern,
- patterns[i].pattern_len);
- memcpy(wow_pattern->mask_bytes, patterns[i].mask, mask_len);
- wow_pattern->pattern_len = patterns[i].pattern_len;
-
- /*
- * just need to take care of deauth and disssoc pattern,
- * make sure we don't overwrite them.
- */
-
- ath9k_hw_wow_apply_pattern(ah, wow_pattern->pattern_bytes,
- wow_pattern->mask_bytes,
- i + 2,
- wow_pattern->pattern_len);
- kfree(wow_pattern);
-
- }
-
-}
-
-static int ath9k_suspend(struct ieee80211_hw *hw,
- struct cfg80211_wowlan *wowlan)
-{
- struct ath_softc *sc = hw->priv;
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- u32 wow_triggers_enabled = 0;
- int ret = 0;
-
- mutex_lock(&sc->mutex);
-
- ath_cancel_work(sc);
- ath_stop_ani(sc);
- del_timer_sync(&sc->rx_poll_timer);
-
- if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
- ath_dbg(common, ANY, "Device not present\n");
- ret = -EINVAL;
- goto fail_wow;
- }
-
- if (WARN_ON(!wowlan)) {
- ath_dbg(common, WOW, "None of the WoW triggers enabled\n");
- ret = -EINVAL;
- goto fail_wow;
- }
-
- if (!device_can_wakeup(sc->dev)) {
- ath_dbg(common, WOW, "device_can_wakeup failed, WoW is not enabled\n");
- ret = 1;
- goto fail_wow;
- }
-
- /*
- * none of the sta vifs are associated
- * and we are not currently handling multivif
- * cases, for instance we have to seperately
- * configure 'keep alive frame' for each
- * STA.
- */
-
- if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
- ath_dbg(common, WOW, "None of the STA vifs are associated\n");
- ret = 1;
- goto fail_wow;
- }
-
- if (sc->nvifs > 1) {
- ath_dbg(common, WOW, "WoW for multivif is not yet supported\n");
- ret = 1;
- goto fail_wow;
- }
-
- ath9k_wow_map_triggers(sc, wowlan, &wow_triggers_enabled);
-
- ath_dbg(common, WOW, "WoW triggers enabled 0x%x\n",
- wow_triggers_enabled);
-
- ath9k_ps_wakeup(sc);
-
- ath9k_stop_btcoex(sc);
-
- /*
- * Enable wake up on recieving disassoc/deauth
- * frame by default.
- */
- ath9k_wow_add_disassoc_deauth_pattern(sc);
-
- if (wow_triggers_enabled & AH_WOW_USER_PATTERN_EN)
- ath9k_wow_add_pattern(sc, wowlan);
-
- spin_lock_bh(&sc->sc_pcu_lock);
- /*
- * To avoid false wake, we enable beacon miss interrupt only
- * when we go to sleep. We save the current interrupt mask
- * so we can restore it after the system wakes up
- */
- sc->wow_intr_before_sleep = ah->imask;
- ah->imask &= ~ATH9K_INT_GLOBAL;
- ath9k_hw_disable_interrupts(ah);
- ah->imask = ATH9K_INT_BMISS | ATH9K_INT_GLOBAL;
- ath9k_hw_set_interrupts(ah);
- ath9k_hw_enable_interrupts(ah);
-
- spin_unlock_bh(&sc->sc_pcu_lock);
-
- /*
- * we can now sync irq and kill any running tasklets, since we already
- * disabled interrupts and not holding a spin lock
- */
- synchronize_irq(sc->irq);
- tasklet_kill(&sc->intr_tq);
-
- ath9k_hw_wow_enable(ah, wow_triggers_enabled);
-
- ath9k_ps_restore(sc);
- ath_dbg(common, ANY, "WoW enabled in ath9k\n");
- atomic_inc(&sc->wow_sleep_proc_intr);
-
-fail_wow:
- mutex_unlock(&sc->mutex);
- return ret;
-}
-
-static int ath9k_resume(struct ieee80211_hw *hw)
-{
- struct ath_softc *sc = hw->priv;
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- u32 wow_status;
-
- mutex_lock(&sc->mutex);
-
- ath9k_ps_wakeup(sc);
-
- spin_lock_bh(&sc->sc_pcu_lock);
-
- ath9k_hw_disable_interrupts(ah);
- ah->imask = sc->wow_intr_before_sleep;
- ath9k_hw_set_interrupts(ah);
- ath9k_hw_enable_interrupts(ah);
-
- spin_unlock_bh(&sc->sc_pcu_lock);
-
- wow_status = ath9k_hw_wow_wakeup(ah);
-
- if (atomic_read(&sc->wow_got_bmiss_intr) == 0) {
- /*
- * some devices may not pick beacon miss
- * as the reason they woke up so we add
- * that here for that shortcoming.
- */
- wow_status |= AH_WOW_BEACON_MISS;
- atomic_dec(&sc->wow_got_bmiss_intr);
- ath_dbg(common, ANY, "Beacon miss interrupt picked up during WoW sleep\n");
- }
-
- atomic_dec(&sc->wow_sleep_proc_intr);
-
- if (wow_status) {
- ath_dbg(common, ANY, "Waking up due to WoW triggers %s with WoW status = %x\n",
- ath9k_hw_wow_event_to_string(wow_status), wow_status);
- }
-
- ath_restart_work(sc);
- ath9k_start_btcoex(sc);
-
- ath9k_ps_restore(sc);
- mutex_unlock(&sc->mutex);
-
- return 0;
-}
-
-static void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
-{
- struct ath_softc *sc = hw->priv;
-
- mutex_lock(&sc->mutex);
- device_init_wakeup(sc->dev, 1);
- device_set_wakeup_enable(sc->dev, enabled);
- mutex_unlock(&sc->mutex);
-}
-
-#endif
static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
@@ -2373,134 +2070,6 @@ static void ath9k_channel_switch_beacon(
sc->csa_vif = vif;
}
-static void ath9k_tx99_stop(struct ath_softc *sc)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
-
- ath_drain_all_txq(sc);
- ath_startrecv(sc);
-
- ath9k_hw_set_interrupts(ah);
- ath9k_hw_enable_interrupts(ah);
-
- ieee80211_wake_queues(sc->hw);
-
- kfree_skb(sc->tx99_skb);
- sc->tx99_skb = NULL;
- sc->tx99_state = false;
-
- ath9k_hw_tx99_stop(sc->sc_ah);
- ath_dbg(common, XMIT, "TX99 stopped\n");
-}
-
-static struct sk_buff *ath9k_build_tx99_skb(struct ath_softc *sc)
-{
- static u8 PN9Data[] = {0xff, 0x87, 0xb8, 0x59, 0xb7, 0xa1, 0xcc, 0x24,
- 0x57, 0x5e, 0x4b, 0x9c, 0x0e, 0xe9, 0xea, 0x50,
- 0x2a, 0xbe, 0xb4, 0x1b, 0xb6, 0xb0, 0x5d, 0xf1,
- 0xe6, 0x9a, 0xe3, 0x45, 0xfd, 0x2c, 0x53, 0x18,
- 0x0c, 0xca, 0xc9, 0xfb, 0x49, 0x37, 0xe5, 0xa8,
- 0x51, 0x3b, 0x2f, 0x61, 0xaa, 0x72, 0x18, 0x84,
- 0x02, 0x23, 0x23, 0xab, 0x63, 0x89, 0x51, 0xb3,
- 0xe7, 0x8b, 0x72, 0x90, 0x4c, 0xe8, 0xfb, 0xc0};
- u32 len = 1200;
- struct ieee80211_hw *hw = sc->hw;
- struct ieee80211_hdr *hdr;
- struct ieee80211_tx_info *tx_info;
- struct sk_buff *skb;
-
- skb = alloc_skb(len, GFP_KERNEL);
- if (!skb)
- return NULL;
-
- skb_put(skb, len);
-
- memset(skb->data, 0, len);
-
- hdr = (struct ieee80211_hdr *)skb->data;
- hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA);
- hdr->duration_id = 0;
-
- memcpy(hdr->addr1, hw->wiphy->perm_addr, ETH_ALEN);
- memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
- memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
-
- hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
-
- tx_info = IEEE80211_SKB_CB(skb);
- memset(tx_info, 0, sizeof(*tx_info));
- tx_info->band = hw->conf.chandef.chan->band;
- tx_info->flags = IEEE80211_TX_CTL_NO_ACK;
- tx_info->control.vif = sc->tx99_vif;
-
- memcpy(skb->data + sizeof(*hdr), PN9Data, sizeof(PN9Data));
-
- return skb;
-}
-
-void ath9k_tx99_deinit(struct ath_softc *sc)
-{
- ath_reset(sc);
-
- ath9k_ps_wakeup(sc);
- ath9k_tx99_stop(sc);
- ath9k_ps_restore(sc);
-}
-
-int ath9k_tx99_init(struct ath_softc *sc)
-{
- struct ieee80211_hw *hw = sc->hw;
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ath_tx_control txctl;
- int r;
-
- if (sc->sc_flags & SC_OP_INVALID) {
- ath_err(common,
- "driver is in invalid state unable to use TX99");
- return -EINVAL;
- }
-
- sc->tx99_skb = ath9k_build_tx99_skb(sc);
- if (!sc->tx99_skb)
- return -ENOMEM;
-
- memset(&txctl, 0, sizeof(txctl));
- txctl.txq = sc->tx.txq_map[IEEE80211_AC_VO];
-
- ath_reset(sc);
-
- ath9k_ps_wakeup(sc);
-
- ath9k_hw_disable_interrupts(ah);
- atomic_set(&ah->intr_ref_cnt, -1);
- ath_drain_all_txq(sc);
- ath_stoprecv(sc);
-
- sc->tx99_state = true;
-
- ieee80211_stop_queues(hw);
-
- if (sc->tx99_power == MAX_RATE_POWER + 1)
- sc->tx99_power = MAX_RATE_POWER;
-
- ath9k_hw_tx99_set_txpower(ah, sc->tx99_power);
- r = ath9k_tx99_send(sc, sc->tx99_skb, &txctl);
- if (r) {
- ath_dbg(common, XMIT, "Failed to xmit TX99 skb\n");
- return r;
- }
-
- ath_dbg(common, XMIT, "TX99 xmit started using %d ( %ddBm)\n",
- sc->tx99_power,
- sc->tx99_power / 2);
-
- /* We leave the harware awake as it will be chugging on */
-
- return 0;
-}
-
struct ieee80211_ops ath9k_ops = {
.tx = ath9k_tx,
.start = ath9k_start,
@@ -2531,7 +2100,7 @@ struct ieee80211_ops ath9k_ops = {
.set_antenna = ath9k_set_antenna,
.get_antenna = ath9k_get_antenna,
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_ATH9K_WOW
.suspend = ath9k_suspend,
.resume = ath9k_resume,
.set_wakeup = ath9k_set_wakeup,
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ * Copyright (c) 2013 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -14,409 +14,348 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#include <linux/export.h>
#include "ath9k.h"
-#include "reg.h"
-#include "hw-ops.h"
-const char *ath9k_hw_wow_event_to_string(u32 wow_event)
+static const struct wiphy_wowlan_support ath9k_wowlan_support = {
+ .flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
+ .n_patterns = MAX_NUM_USER_PATTERN,
+ .pattern_min_len = 1,
+ .pattern_max_len = MAX_PATTERN_SIZE,
+};
+
+static void ath9k_wow_map_triggers(struct ath_softc *sc,
+ struct cfg80211_wowlan *wowlan,
+ u32 *wow_triggers)
{
- if (wow_event & AH_WOW_MAGIC_PATTERN_EN)
- return "Magic pattern";
- if (wow_event & AH_WOW_USER_PATTERN_EN)
- return "User pattern";
- if (wow_event & AH_WOW_LINK_CHANGE)
- return "Link change";
- if (wow_event & AH_WOW_BEACON_MISS)
- return "Beacon miss";
+ if (wowlan->disconnect)
+ *wow_triggers |= AH_WOW_LINK_CHANGE |
+ AH_WOW_BEACON_MISS;
+ if (wowlan->magic_pkt)
+ *wow_triggers |= AH_WOW_MAGIC_PATTERN_EN;
+
+ if (wowlan->n_patterns)
+ *wow_triggers |= AH_WOW_USER_PATTERN_EN;
+
+ sc->wow_enabled = *wow_triggers;
- return "unknown reason";
}
-EXPORT_SYMBOL(ath9k_hw_wow_event_to_string);
-static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
+static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
{
+ struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
+ int pattern_count = 0;
+ int i, byte_cnt;
+ u8 dis_deauth_pattern[MAX_PATTERN_SIZE];
+ u8 dis_deauth_mask[MAX_PATTERN_SIZE];
- REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
+ memset(dis_deauth_pattern, 0, MAX_PATTERN_SIZE);
+ memset(dis_deauth_mask, 0, MAX_PATTERN_SIZE);
- /* set rx disable bit */
- REG_WRITE(ah, AR_CR, AR_CR_RXD);
+ /*
+ * Create Dissassociate / Deauthenticate packet filter
+ *
+ * 2 bytes 2 byte 6 bytes 6 bytes 6 bytes
+ * +--------------+----------+---------+--------+--------+----
+ * + Frame Control+ Duration + DA + SA + BSSID +
+ * +--------------+----------+---------+--------+--------+----
+ *
+ * The above is the management frame format for disassociate/
+ * deauthenticate pattern, from this we need to match the first byte
+ * of 'Frame Control' and DA, SA, and BSSID fields
+ * (skipping 2nd byte of FC and Duration feild.
+ *
+ * Disassociate pattern
+ * --------------------
+ * Frame control = 00 00 1010
+ * DA, SA, BSSID = x:x:x:x:x:x
+ * Pattern will be A0000000 | x:x:x:x:x:x | x:x:x:x:x:x
+ * | x:x:x:x:x:x -- 22 bytes
+ *
+ * Deauthenticate pattern
+ * ----------------------
+ * Frame control = 00 00 1100
+ * DA, SA, BSSID = x:x:x:x:x:x
+ * Pattern will be C0000000 | x:x:x:x:x:x | x:x:x:x:x:x
+ * | x:x:x:x:x:x -- 22 bytes
+ */
- if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0, AH_WAIT_TIMEOUT)) {
- ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
- REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
- return;
- }
+ /* Create Disassociate Pattern first */
- REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
-}
+ byte_cnt = 0;
-static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
-{
- struct ath_common *common = ath9k_hw_common(ah);
- u8 sta_mac_addr[ETH_ALEN], ap_mac_addr[ETH_ALEN];
- u32 ctl[13] = {0};
- u32 data_word[KAL_NUM_DATA_WORDS];
- u8 i;
- u32 wow_ka_data_word0;
-
- memcpy(sta_mac_addr, common->macaddr, ETH_ALEN);
- memcpy(ap_mac_addr, common->curbssid, ETH_ALEN);
-
- /* set the transmit buffer */
- ctl[0] = (KAL_FRAME_LEN | (MAX_RATE_POWER << 16));
- ctl[1] = 0;
- ctl[3] = 0xb; /* OFDM_6M hardware value for this rate */
- ctl[4] = 0;
- ctl[7] = (ah->txchainmask) << 2;
- ctl[2] = 0xf << 16; /* tx_tries 0 */
-
- for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
- REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
-
- REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
-
- data_word[0] = (KAL_FRAME_TYPE << 2) | (KAL_FRAME_SUB_TYPE << 4) |
- (KAL_TO_DS << 8) | (KAL_DURATION_ID << 16);
- data_word[1] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
- (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
- data_word[2] = (sta_mac_addr[1] << 24) | (sta_mac_addr[0] << 16) |
- (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
- data_word[3] = (sta_mac_addr[5] << 24) | (sta_mac_addr[4] << 16) |
- (sta_mac_addr[3] << 8) | (sta_mac_addr[2]);
- data_word[4] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
- (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
- data_word[5] = (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
-
- if (AR_SREV_9462_20(ah)) {
- /* AR9462 2.0 has an extra descriptor word (time based
- * discard) compared to other chips */
- REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + (12 * 4)), 0);
- wow_ka_data_word0 = AR_WOW_TXBUF(13);
- } else {
- wow_ka_data_word0 = AR_WOW_TXBUF(12);
- }
+ /* Fill out the mask with all FF's */
- for (i = 0; i < KAL_NUM_DATA_WORDS; i++)
- REG_WRITE(ah, (wow_ka_data_word0 + i*4), data_word[i]);
+ for (i = 0; i < MAX_PATTERN_MASK_SIZE; i++)
+ dis_deauth_mask[i] = 0xff;
-}
+ /* copy the first byte of frame control field */
+ dis_deauth_pattern[byte_cnt] = 0xa0;
+ byte_cnt++;
-void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
- u8 *user_mask, int pattern_count,
- int pattern_len)
-{
- int i;
- u32 pattern_val, mask_val;
- u32 set, clr;
+ /* skip 2nd byte of frame control and Duration field */
+ byte_cnt += 3;
- /* FIXME: should check count by querying the hardware capability */
- if (pattern_count >= MAX_NUM_PATTERN)
- return;
+ /*
+ * need not match the destination mac address, it can be a broadcast
+ * mac address or an unicast to this station
+ */
+ byte_cnt += 6;
- REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
+ /* copy the source mac address */
+ memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
- /* set the registers for pattern */
- for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
- memcpy(&pattern_val, user_pattern, 4);
- REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i),
- pattern_val);
- user_pattern += 4;
- }
+ byte_cnt += 6;
- /* set the registers for mask */
- for (i = 0; i < MAX_PATTERN_MASK_SIZE; i += 4) {
- memcpy(&mask_val, user_mask, 4);
- REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val);
- user_mask += 4;
- }
+ /* copy the bssid, its same as the source mac address */
- /* set the pattern length to be matched
- *
- * AR_WOW_LENGTH1_REG1
- * bit 31:24 pattern 0 length
- * bit 23:16 pattern 1 length
- * bit 15:8 pattern 2 length
- * bit 7:0 pattern 3 length
- *
- * AR_WOW_LENGTH1_REG2
- * bit 31:24 pattern 4 length
- * bit 23:16 pattern 5 length
- * bit 15:8 pattern 6 length
- * bit 7:0 pattern 7 length
- *
- * the below logic writes out the new
- * pattern length for the corresponding
- * pattern_count, while masking out the
- * other fields
- */
+ memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
- ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
+ /* Create Disassociate pattern mask */
- if (pattern_count < 4) {
- /* Pattern 0-3 uses AR_WOW_LENGTH1 register */
- set = (pattern_len & AR_WOW_LENGTH_MAX) <<
- AR_WOW_LEN1_SHIFT(pattern_count);
- clr = AR_WOW_LENGTH1_MASK(pattern_count);
- REG_RMW(ah, AR_WOW_LENGTH1, set, clr);
- } else {
- /* Pattern 4-7 uses AR_WOW_LENGTH2 register */
- set = (pattern_len & AR_WOW_LENGTH_MAX) <<
- AR_WOW_LEN2_SHIFT(pattern_count);
- clr = AR_WOW_LENGTH2_MASK(pattern_count);
- REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
- }
+ dis_deauth_mask[0] = 0xfe;
+ dis_deauth_mask[1] = 0x03;
+ dis_deauth_mask[2] = 0xc0;
-}
-EXPORT_SYMBOL(ath9k_hw_wow_apply_pattern);
+ ath_dbg(common, WOW, "Adding disassoc/deauth patterns for WoW\n");
-u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
-{
- u32 wow_status = 0;
- u32 val = 0, rval;
+ ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
+ pattern_count, byte_cnt);
+ pattern_count++;
/*
- * read the WoW status register to know
- * the wakeup reason
+ * for de-authenticate pattern, only the first byte of the frame
+ * control field gets changed from 0xA0 to 0xC0
*/
- rval = REG_READ(ah, AR_WOW_PATTERN);
- val = AR_WOW_STATUS(rval);
+ dis_deauth_pattern[0] = 0xC0;
- /*
- * mask only the WoW events that we have enabled. Sometimes
- * we have spurious WoW events from the AR_WOW_PATTERN
- * register. This mask will clean it up.
- */
+ ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
+ pattern_count, byte_cnt);
- val &= ah->wow_event_mask;
+}
- if (val) {
- if (val & AR_WOW_MAGIC_PAT_FOUND)
- wow_status |= AH_WOW_MAGIC_PATTERN_EN;
- if (AR_WOW_PATTERN_FOUND(val))
- wow_status |= AH_WOW_USER_PATTERN_EN;
- if (val & AR_WOW_KEEP_ALIVE_FAIL)
- wow_status |= AH_WOW_LINK_CHANGE;
- if (val & AR_WOW_BEACON_FAIL)
- wow_status |= AH_WOW_BEACON_MISS;
- }
+static void ath9k_wow_add_pattern(struct ath_softc *sc,
+ struct cfg80211_wowlan *wowlan)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath9k_wow_pattern *wow_pattern = NULL;
+ struct cfg80211_pkt_pattern *patterns = wowlan->patterns;
+ int mask_len;
+ s8 i = 0;
+
+ if (!wowlan->n_patterns)
+ return;
/*
- * set and clear WOW_PME_CLEAR registers for the chip to
- * generate next wow signal.
- * disable D3 before accessing other registers ?
+ * Add the new user configured patterns
*/
+ for (i = 0; i < wowlan->n_patterns; i++) {
- /* do we need to check the bit value 0x01000000 (7-10) ?? */
- REG_RMW(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_WOW_PME_CLR,
- AR_PMCTRL_PWR_STATE_D1D3);
+ wow_pattern = kzalloc(sizeof(*wow_pattern), GFP_KERNEL);
- /*
- * clear all events
- */
- REG_WRITE(ah, AR_WOW_PATTERN,
- AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN)));
+ if (!wow_pattern)
+ return;
- /*
- * restore the beacon threshold to init value
- */
- REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
+ /*
+ * TODO: convert the generic user space pattern to
+ * appropriate chip specific/802.11 pattern.
+ */
- /*
- * Restore the way the PCI-E reset, Power-On-Reset, external
- * PCIE_POR_SHORT pins are tied to its original value.
- * Previously just before WoW sleep, we untie the PCI-E
- * reset to our Chip's Power On Reset so that any PCI-E
- * reset from the bus will not reset our chip
- */
- if (ah->is_pciexpress)
- ath9k_hw_configpcipowersave(ah, false);
+ mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8);
+ memset(wow_pattern->pattern_bytes, 0, MAX_PATTERN_SIZE);
+ memset(wow_pattern->mask_bytes, 0, MAX_PATTERN_SIZE);
+ memcpy(wow_pattern->pattern_bytes, patterns[i].pattern,
+ patterns[i].pattern_len);
+ memcpy(wow_pattern->mask_bytes, patterns[i].mask, mask_len);
+ wow_pattern->pattern_len = patterns[i].pattern_len;
+
+ /*
+ * just need to take care of deauth and disssoc pattern,
+ * make sure we don't overwrite them.
+ */
+
+ ath9k_hw_wow_apply_pattern(ah, wow_pattern->pattern_bytes,
+ wow_pattern->mask_bytes,
+ i + 2,
+ wow_pattern->pattern_len);
+ kfree(wow_pattern);
- ah->wow_event_mask = 0;
+ }
- return wow_status;
}
-EXPORT_SYMBOL(ath9k_hw_wow_wakeup);
-void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
+int ath9k_suspend(struct ieee80211_hw *hw,
+ struct cfg80211_wowlan *wowlan)
{
- u32 wow_event_mask;
- u32 set, clr;
+ struct ath_softc *sc = hw->priv;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ u32 wow_triggers_enabled = 0;
+ int ret = 0;
- /*
- * wow_event_mask is a mask to the AR_WOW_PATTERN register to
- * indicate which WoW events we have enabled. The WoW events
- * are from the 'pattern_enable' in this function and
- * 'pattern_count' of ath9k_hw_wow_apply_pattern()
- */
- wow_event_mask = ah->wow_event_mask;
+ mutex_lock(&sc->mutex);
- /*
- * Untie Power-on-Reset from the PCI-E-Reset. When we are in
- * WOW sleep, we do want the Reset from the PCI-E to disturb
- * our hw state
- */
- if (ah->is_pciexpress) {
- /*
- * we need to untie the internal POR (power-on-reset)
- * to the external PCI-E reset. We also need to tie
- * the PCI-E Phy reset to the PCI-E reset.
- */
- set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
- clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
- REG_RMW(ah, AR_WA, set, clr);
+ ath_cancel_work(sc);
+ ath_stop_ani(sc);
+ del_timer_sync(&sc->rx_poll_timer);
+
+ if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
+ ath_dbg(common, ANY, "Device not present\n");
+ ret = -EINVAL;
+ goto fail_wow;
}
- /*
- * set the power states appropriately and enable PME
- */
- set = AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA |
- AR_PMCTRL_AUX_PWR_DET | AR_PMCTRL_WOW_PME_CLR;
+ if (WARN_ON(!wowlan)) {
+ ath_dbg(common, WOW, "None of the WoW triggers enabled\n");
+ ret = -EINVAL;
+ goto fail_wow;
+ }
- /*
- * set and clear WOW_PME_CLEAR registers for the chip
- * to generate next wow signal.
- */
- REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
- clr = AR_PMCTRL_WOW_PME_CLR;
- REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+ if (!device_can_wakeup(sc->dev)) {
+ ath_dbg(common, WOW, "device_can_wakeup failed, WoW is not enabled\n");
+ ret = 1;
+ goto fail_wow;
+ }
/*
- * Setup for:
- * - beacon misses
- * - magic pattern
- * - keep alive timeout
- * - pattern matching
+ * none of the sta vifs are associated
+ * and we are not currently handling multivif
+ * cases, for instance we have to seperately
+ * configure 'keep alive frame' for each
+ * STA.
*/
- /*
- * Program default values for pattern backoff, aifs/slot/KAL count,
- * beacon miss timeout, KAL timeout, etc.
- */
- set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
- REG_SET_BIT(ah, AR_WOW_PATTERN, set);
+ if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
+ ath_dbg(common, WOW, "None of the STA vifs are associated\n");
+ ret = 1;
+ goto fail_wow;
+ }
+
+ if (sc->nvifs > 1) {
+ ath_dbg(common, WOW, "WoW for multivif is not yet supported\n");
+ ret = 1;
+ goto fail_wow;
+ }
- set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
- AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
- AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT);
- REG_SET_BIT(ah, AR_WOW_COUNT, set);
-
- if (pattern_enable & AH_WOW_BEACON_MISS)
- set = AR_WOW_BEACON_TIMO;
- /* We are not using beacon miss, program a large value */
- else
- set = AR_WOW_BEACON_TIMO_MAX;
+ ath9k_wow_map_triggers(sc, wowlan, &wow_triggers_enabled);
- REG_WRITE(ah, AR_WOW_BCN_TIMO, set);
+ ath_dbg(common, WOW, "WoW triggers enabled 0x%x\n",
+ wow_triggers_enabled);
- /*
- * Keep alive timo in ms except AR9280
- */
- if (!pattern_enable)
- set = AR_WOW_KEEP_ALIVE_NEVER;
- else
- set = KAL_TIMEOUT * 32;
+ ath9k_ps_wakeup(sc);
- REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set);
+ ath9k_stop_btcoex(sc);
/*
- * Keep alive delay in us. based on 'power on clock',
- * therefore in usec
+ * Enable wake up on recieving disassoc/deauth
+ * frame by default.
*/
- set = KAL_DELAY * 1000;
- REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set);
+ ath9k_wow_add_disassoc_deauth_pattern(sc);
- /*
- * Create keep alive pattern to respond to beacons
- */
- ath9k_wow_create_keep_alive_pattern(ah);
+ if (wow_triggers_enabled & AH_WOW_USER_PATTERN_EN)
+ ath9k_wow_add_pattern(sc, wowlan);
+ spin_lock_bh(&sc->sc_pcu_lock);
/*
- * Configure MAC WoW Registers
+ * To avoid false wake, we enable beacon miss interrupt only
+ * when we go to sleep. We save the current interrupt mask
+ * so we can restore it after the system wakes up
*/
- set = 0;
- /* Send keep alive timeouts anyway */
- clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;
-
- if (pattern_enable & AH_WOW_LINK_CHANGE)
- wow_event_mask |= AR_WOW_KEEP_ALIVE_FAIL;
- else
- set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
+ sc->wow_intr_before_sleep = ah->imask;
+ ah->imask &= ~ATH9K_INT_GLOBAL;
+ ath9k_hw_disable_interrupts(ah);
+ ah->imask = ATH9K_INT_BMISS | ATH9K_INT_GLOBAL;
+ ath9k_hw_set_interrupts(ah);
+ ath9k_hw_enable_interrupts(ah);
- set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
- REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);
+ spin_unlock_bh(&sc->sc_pcu_lock);
/*
- * we are relying on a bmiss failure. ensure we have
- * enough threshold to prevent false positives
+ * we can now sync irq and kill any running tasklets, since we already
+ * disabled interrupts and not holding a spin lock
*/
- REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR,
- AR_WOW_BMISSTHRESHOLD);
+ synchronize_irq(sc->irq);
+ tasklet_kill(&sc->intr_tq);
+
+ ath9k_hw_wow_enable(ah, wow_triggers_enabled);
- set = 0;
- clr = 0;
+ ath9k_ps_restore(sc);
+ ath_dbg(common, ANY, "WoW enabled in ath9k\n");
+ atomic_inc(&sc->wow_sleep_proc_intr);
- if (pattern_enable & AH_WOW_BEACON_MISS) {
- set = AR_WOW_BEACON_FAIL_EN;
- wow_event_mask |= AR_WOW_BEACON_FAIL;
- } else {
- clr = AR_WOW_BEACON_FAIL_EN;
+fail_wow:
+ mutex_unlock(&sc->mutex);
+ return ret;
+}
+
+int ath9k_resume(struct ieee80211_hw *hw)
+{
+ struct ath_softc *sc = hw->priv;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ u32 wow_status;
+
+ mutex_lock(&sc->mutex);
+
+ ath9k_ps_wakeup(sc);
+
+ spin_lock_bh(&sc->sc_pcu_lock);
+
+ ath9k_hw_disable_interrupts(ah);
+ ah->imask = sc->wow_intr_before_sleep;
+ ath9k_hw_set_interrupts(ah);
+ ath9k_hw_enable_interrupts(ah);
+
+ spin_unlock_bh(&sc->sc_pcu_lock);
+
+ wow_status = ath9k_hw_wow_wakeup(ah);
+
+ if (atomic_read(&sc->wow_got_bmiss_intr) == 0) {
+ /*
+ * some devices may not pick beacon miss
+ * as the reason they woke up so we add
+ * that here for that shortcoming.
+ */
+ wow_status |= AH_WOW_BEACON_MISS;
+ atomic_dec(&sc->wow_got_bmiss_intr);
+ ath_dbg(common, ANY, "Beacon miss interrupt picked up during WoW sleep\n");
}
- REG_RMW(ah, AR_WOW_BCN_EN, set, clr);
+ atomic_dec(&sc->wow_sleep_proc_intr);
- set = 0;
- clr = 0;
- /*
- * Enable the magic packet registers
- */
- if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) {
- set = AR_WOW_MAGIC_EN;
- wow_event_mask |= AR_WOW_MAGIC_PAT_FOUND;
- } else {
- clr = AR_WOW_MAGIC_EN;
+ if (wow_status) {
+ ath_dbg(common, ANY, "Waking up due to WoW triggers %s with WoW status = %x\n",
+ ath9k_hw_wow_event_to_string(wow_status), wow_status);
}
- set |= AR_WOW_MAC_INTR_EN;
- REG_RMW(ah, AR_WOW_PATTERN, set, clr);
- REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
- AR_WOW_PATTERN_SUPPORTED);
+ ath_restart_work(sc);
+ ath9k_start_btcoex(sc);
- /*
- * Set the power states appropriately and enable PME
- */
- clr = 0;
- set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN |
- AR_PMCTRL_PWR_PM_CTRL_ENA;
+ ath9k_ps_restore(sc);
+ mutex_unlock(&sc->mutex);
- clr = AR_PCIE_PM_CTRL_ENA;
- REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);
+ return 0;
+}
- /*
- * this is needed to prevent the chip waking up
- * the host within 3-4 seconds with certain
- * platform/BIOS. The fix is to enable
- * D1 & D3 to match original definition and
- * also match the OTP value. Anyway this
- * is more related to SW WOW.
- */
- clr = AR_PMCTRL_PWR_STATE_D1D3;
- REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
+{
+ struct ath_softc *sc = hw->priv;
- set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
- REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
+ mutex_lock(&sc->mutex);
+ device_init_wakeup(sc->dev, 1);
+ device_set_wakeup_enable(sc->dev, enabled);
+ mutex_unlock(&sc->mutex);
+}
- REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
+void ath9k_init_wow(struct ieee80211_hw *hw)
+{
+ struct ath_softc *sc = hw->priv;
- /* to bring down WOW power low margin */
- set = BIT(13);
- REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
- /* HW WoW */
- clr = BIT(5);
- REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
+ if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) &&
+ (sc->driver_data & ATH9K_PCI_WOW) &&
+ device_can_wakeup(sc->dev))
+ hw->wiphy->wowlan = &ath9k_wowlan_support;
- ath9k_hw_set_powermode_wow_sleep(ah);
- ah->wow_event_mask = wow_event_mask;
+ atomic_set(&sc->wow_sleep_proc_intr, -1);
+ atomic_set(&sc->wow_got_bmiss_intr, -1);
}
-EXPORT_SYMBOL(ath9k_hw_wow_enable);
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1786,6 +1786,9 @@ bool ath_drain_all_txq(struct ath_softc
if (!ATH_TXQ_SETUP(sc, i))
continue;
+ if (!sc->tx.txq[i].axq_depth)
+ continue;
+
if (ath9k_hw_numtxpending(ah, sc->tx.txq[i].axq_qnum))
npend |= BIT(i);
}
@@ -2749,6 +2752,8 @@ void ath_tx_node_cleanup(struct ath_soft
}
}
+#ifdef CONFIG_ATH9K_TX99
+
int ath9k_tx99_send(struct ath_softc *sc, struct sk_buff *skb,
struct ath_tx_control *txctl)
{
@@ -2791,3 +2796,5 @@ int ath9k_tx99_send(struct ath_softc *sc
return 0;
}
+
+#endif /* CONFIG_ATH9K_TX99 */
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -37,17 +37,17 @@ static int __ath_regd_init(struct ath_re
/* We enable active scan on these a case by case basis by regulatory domain */
#define ATH9K_2GHZ_CH12_13 REG_RULE(2467-10, 2472+10, 40, 0, 20,\
- NL80211_RRF_PASSIVE_SCAN)
+ NL80211_RRF_NO_IR)
#define ATH9K_2GHZ_CH14 REG_RULE(2484-10, 2484+10, 40, 0, 20,\
- NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_OFDM)
+ NL80211_RRF_NO_IR | NL80211_RRF_NO_OFDM)
/* We allow IBSS on these on a case by case basis by regulatory domain */
#define ATH9K_5GHZ_5150_5350 REG_RULE(5150-10, 5350+10, 80, 0, 30,\
- NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
+ NL80211_RRF_NO_IR)
#define ATH9K_5GHZ_5470_5850 REG_RULE(5470-10, 5850+10, 80, 0, 30,\
- NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
+ NL80211_RRF_NO_IR)
#define ATH9K_5GHZ_5725_5850 REG_RULE(5725-10, 5850+10, 80, 0, 30,\
- NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
+ NL80211_RRF_NO_IR)
#define ATH9K_2GHZ_ALL ATH9K_2GHZ_CH01_11, \
ATH9K_2GHZ_CH12_13, \
@@ -224,17 +224,16 @@ ath_reg_apply_beaconing_flags(struct wip
* regulatory_hint().
*/
if (!(reg_rule->flags &
- NL80211_RRF_NO_IBSS))
+ NL80211_RRF_NO_IR))
ch->flags &=
- ~IEEE80211_CHAN_NO_IBSS;
+ ~IEEE80211_CHAN_NO_IR;
if (!(reg_rule->flags &
- NL80211_RRF_PASSIVE_SCAN))
+ NL80211_RRF_NO_IR))
ch->flags &=
- ~IEEE80211_CHAN_PASSIVE_SCAN;
+ ~IEEE80211_CHAN_NO_IR;
} else {
if (ch->beacon_found)
- ch->flags &= ~(IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN);
+ ch->flags &= ~IEEE80211_CHAN_NO_IR;
}
}
}
@@ -260,11 +259,11 @@ ath_reg_apply_active_scan_flags(struct w
*/
if (initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) {
ch = &sband->channels[11]; /* CH 12 */
- if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
- ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
+ if (ch->flags & IEEE80211_CHAN_NO_IR)
+ ch->flags &= ~IEEE80211_CHAN_NO_IR;
ch = &sband->channels[12]; /* CH 13 */
- if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
- ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
+ if (ch->flags & IEEE80211_CHAN_NO_IR)
+ ch->flags &= ~IEEE80211_CHAN_NO_IR;
return;
}
@@ -278,17 +277,17 @@ ath_reg_apply_active_scan_flags(struct w
ch = &sband->channels[11]; /* CH 12 */
reg_rule = freq_reg_info(wiphy, ch->center_freq);
if (!IS_ERR(reg_rule)) {
- if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
- if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
- ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
+ if (!(reg_rule->flags & NL80211_RRF_NO_IR))
+ if (ch->flags & IEEE80211_CHAN_NO_IR)
+ ch->flags &= ~IEEE80211_CHAN_NO_IR;
}
ch = &sband->channels[12]; /* CH 13 */
reg_rule = freq_reg_info(wiphy, ch->center_freq);
if (!IS_ERR(reg_rule)) {
- if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
- if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
- ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
+ if (!(reg_rule->flags & NL80211_RRF_NO_IR))
+ if (ch->flags & IEEE80211_CHAN_NO_IR)
+ ch->flags &= ~IEEE80211_CHAN_NO_IR;
}
}
@@ -320,8 +319,8 @@ static void ath_reg_apply_radar_flags(st
*/
if (!(ch->flags & IEEE80211_CHAN_DISABLED))
ch->flags |= IEEE80211_CHAN_RADAR |
- IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN;
+ IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR;
}
}
--- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
@@ -812,7 +812,7 @@ static s32 brcmf_p2p_run_escan(struct br
struct ieee80211_channel *chan = request->channels[i];
if (chan->flags & (IEEE80211_CHAN_RADAR |
- IEEE80211_CHAN_PASSIVE_SCAN))
+ IEEE80211_CHAN_NO_IR))
continue;
chanspecs[i] = channel_to_chanspec(&p2p->cfg->d11inf,
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -202,9 +202,9 @@ static struct ieee80211_supported_band _
/* This is to override regulatory domains defined in cfg80211 module (reg.c)
* By default world regulatory domain defined in reg.c puts the flags
- * NL80211_RRF_PASSIVE_SCAN and NL80211_RRF_NO_IBSS for 5GHz channels (for
- * 36..48 and 149..165). With respect to these flags, wpa_supplicant doesn't
- * start p2p operations on 5GHz channels. All the changes in world regulatory
+ * NL80211_RRF_NO_IR for 5GHz channels (for * 36..48 and 149..165).
+ * With respect to these flags, wpa_supplicant doesn't * start p2p
+ * operations on 5GHz channels. All the changes in world regulatory
* domain are to be done here.
*/
static const struct ieee80211_regdomain brcmf_regdom = {
@@ -5197,10 +5197,10 @@ static s32 brcmf_construct_reginfo(struc
if (channel & WL_CHAN_RADAR)
band_chan_arr[index].flags |=
(IEEE80211_CHAN_RADAR |
- IEEE80211_CHAN_NO_IBSS);
+ IEEE80211_CHAN_NO_IR);
if (channel & WL_CHAN_PASSIVE)
band_chan_arr[index].flags |=
- IEEE80211_CHAN_PASSIVE_SCAN;
+ IEEE80211_CHAN_NO_IR;
}
}
if (!update)
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -59,23 +59,20 @@
#define BRCM_2GHZ_2412_2462 REG_RULE(2412-10, 2462+10, 40, 0, 19, 0)
#define BRCM_2GHZ_2467_2472 REG_RULE(2467-10, 2472+10, 20, 0, 19, \
- NL80211_RRF_PASSIVE_SCAN | \
- NL80211_RRF_NO_IBSS)
+ NL80211_RRF_NO_IR)
#define BRCM_5GHZ_5180_5240 REG_RULE(5180-10, 5240+10, 40, 0, 21, \
- NL80211_RRF_PASSIVE_SCAN | \
- NL80211_RRF_NO_IBSS)
+ NL80211_RRF_NO_IR)
#define BRCM_5GHZ_5260_5320 REG_RULE(5260-10, 5320+10, 40, 0, 21, \
- NL80211_RRF_PASSIVE_SCAN | \
+ NL80211_RRF_NO_IR | \
NL80211_RRF_DFS | \
- NL80211_RRF_NO_IBSS)
+ NL80211_RRF_NO_IR)
#define BRCM_5GHZ_5500_5700 REG_RULE(5500-10, 5700+10, 40, 0, 21, \
- NL80211_RRF_PASSIVE_SCAN | \
+ NL80211_RRF_NO_IR | \
NL80211_RRF_DFS | \
- NL80211_RRF_NO_IBSS)
+ NL80211_RRF_NO_IR)
#define BRCM_5GHZ_5745_5825 REG_RULE(5745-10, 5825+10, 40, 0, 21, \
- NL80211_RRF_PASSIVE_SCAN | \
- NL80211_RRF_NO_IBSS)
+ NL80211_RRF_NO_IR)
static const struct ieee80211_regdomain brcms_regdom_x2 = {
.n_reg_rules = 6,
@@ -395,7 +392,7 @@ brcms_c_channel_set_chanspec(struct brcm
brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false);
brcms_b_set_chanspec(wlc->hw, chanspec,
- !!(ch->flags & IEEE80211_CHAN_PASSIVE_SCAN),
+ !!(ch->flags & IEEE80211_CHAN_NO_IR),
&txpwr);
}
@@ -657,8 +654,8 @@ static void brcms_reg_apply_radar_flags(
*/
if (!(ch->flags & IEEE80211_CHAN_DISABLED))
ch->flags |= IEEE80211_CHAN_RADAR |
- IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN;
+ IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR;
}
}
@@ -688,14 +685,13 @@ brcms_reg_apply_beaconing_flags(struct w
if (IS_ERR(rule))
continue;
- if (!(rule->flags & NL80211_RRF_NO_IBSS))
- ch->flags &= ~IEEE80211_CHAN_NO_IBSS;
- if (!(rule->flags & NL80211_RRF_PASSIVE_SCAN))
+ if (!(rule->flags & NL80211_RRF_NO_IR))
+ ch->flags &= ~IEEE80211_CHAN_NO_IR;
+ if (!(rule->flags & NL80211_RRF_NO_IR))
ch->flags &=
- ~IEEE80211_CHAN_PASSIVE_SCAN;
+ ~IEEE80211_CHAN_NO_IR;
} else if (ch->beacon_found) {
- ch->flags &= ~(IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN);
+ ch->flags &= ~IEEE80211_CHAN_NO_IR;
}
}
}
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -125,13 +125,13 @@ static struct ieee80211_channel brcms_2g
CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS),
CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS),
CHAN2GHZ(12, 2467,
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
+ IEEE80211_CHAN_NO_IR |
IEEE80211_CHAN_NO_HT40PLUS),
CHAN2GHZ(13, 2472,
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
+ IEEE80211_CHAN_NO_IR |
IEEE80211_CHAN_NO_HT40PLUS),
CHAN2GHZ(14, 2484,
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
+ IEEE80211_CHAN_NO_IR |
IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS |
IEEE80211_CHAN_NO_OFDM)
};
@@ -144,51 +144,51 @@ static struct ieee80211_channel brcms_5g
CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS),
/* UNII-2 */
CHAN5GHZ(52,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
CHAN5GHZ(56,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
CHAN5GHZ(60,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
CHAN5GHZ(64,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
/* MID */
CHAN5GHZ(100,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
CHAN5GHZ(104,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
CHAN5GHZ(108,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
CHAN5GHZ(112,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
CHAN5GHZ(116,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
CHAN5GHZ(120,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
CHAN5GHZ(124,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
CHAN5GHZ(128,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
CHAN5GHZ(132,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
CHAN5GHZ(136,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
CHAN5GHZ(140,
- IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS |
+ IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS |
IEEE80211_CHAN_NO_HT40MINUS),
/* UNII-3 */
CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS),
--- a/drivers/net/wireless/cw1200/scan.c
+++ b/drivers/net/wireless/cw1200/scan.c
@@ -197,9 +197,9 @@ void cw1200_scan_work(struct work_struct
if ((*it)->band != first->band)
break;
if (((*it)->flags ^ first->flags) &
- IEEE80211_CHAN_PASSIVE_SCAN)
+ IEEE80211_CHAN_NO_IR)
break;
- if (!(first->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
+ if (!(first->flags & IEEE80211_CHAN_NO_IR) &&
(*it)->max_power != first->max_power)
break;
}
@@ -210,7 +210,7 @@ void cw1200_scan_work(struct work_struct
else
scan.max_tx_rate = WSM_TRANSMIT_RATE_1;
scan.num_probes =
- (first->flags & IEEE80211_CHAN_PASSIVE_SCAN) ? 0 : 2;
+ (first->flags & IEEE80211_CHAN_NO_IR) ? 0 : 2;
scan.num_ssids = priv->scan.n_ssids;
scan.ssids = &priv->scan.ssids[0];
scan.num_channels = it - priv->scan.curr;
@@ -233,7 +233,7 @@ void cw1200_scan_work(struct work_struct
}
for (i = 0; i < scan.num_channels; ++i) {
scan.ch[i].number = priv->scan.curr[i]->hw_value;
- if (priv->scan.curr[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
+ if (priv->scan.curr[i]->flags & IEEE80211_CHAN_NO_IR) {
scan.ch[i].min_chan_time = 50;
scan.ch[i].max_chan_time = 100;
} else {
@@ -241,7 +241,7 @@ void cw1200_scan_work(struct work_struct
scan.ch[i].max_chan_time = 25;
}
}
- if (!(first->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
+ if (!(first->flags & IEEE80211_CHAN_NO_IR) &&
priv->scan.output_power != first->max_power) {
priv->scan.output_power = first->max_power;
wsm_set_output_power(priv,
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1934,10 +1934,10 @@ static int ipw2100_wdev_init(struct net_
bg_band->channels[i].max_power = geo->bg[i].max_power;
if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY)
bg_band->channels[i].flags |=
- IEEE80211_CHAN_PASSIVE_SCAN;
+ IEEE80211_CHAN_NO_IR;
if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS)
bg_band->channels[i].flags |=
- IEEE80211_CHAN_NO_IBSS;
+ IEEE80211_CHAN_NO_IR;
if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT)
bg_band->channels[i].flags |=
IEEE80211_CHAN_RADAR;
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -11472,10 +11472,10 @@ static int ipw_wdev_init(struct net_devi
bg_band->channels[i].max_power = geo->bg[i].max_power;
if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY)
bg_band->channels[i].flags |=
- IEEE80211_CHAN_PASSIVE_SCAN;
+ IEEE80211_CHAN_NO_IR;
if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS)
bg_band->channels[i].flags |=
- IEEE80211_CHAN_NO_IBSS;
+ IEEE80211_CHAN_NO_IR;
if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT)
bg_band->channels[i].flags |=
IEEE80211_CHAN_RADAR;
@@ -11511,10 +11511,10 @@ static int ipw_wdev_init(struct net_devi
a_band->channels[i].max_power = geo->a[i].max_power;
if (geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY)
a_band->channels[i].flags |=
- IEEE80211_CHAN_PASSIVE_SCAN;
+ IEEE80211_CHAN_NO_IR;
if (geo->a[i].flags & LIBIPW_CH_NO_IBSS)
a_band->channels[i].flags |=
- IEEE80211_CHAN_NO_IBSS;
+ IEEE80211_CHAN_NO_IR;
if (geo->a[i].flags & LIBIPW_CH_RADAR_DETECT)
a_band->channels[i].flags |=
IEEE80211_CHAN_RADAR;
--- a/drivers/net/wireless/iwlegacy/3945-mac.c
+++ b/drivers/net/wireless/iwlegacy/3945-mac.c
@@ -1595,7 +1595,7 @@ il3945_get_channels_for_scan(struct il_p
* and use long active_dwell time.
*/
if (!is_active || il_is_channel_passive(ch_info) ||
- (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
+ (chan->flags & IEEE80211_CHAN_NO_IR)) {
scan_ch->type = 0; /* passive */
if (IL_UCODE_API(il->ucode_ver) == 1)
scan_ch->active_dwell =
--- a/drivers/net/wireless/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -805,7 +805,7 @@ il4965_get_channels_for_scan(struct il_p
}
if (!is_active || il_is_channel_passive(ch_info) ||
- (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
+ (chan->flags & IEEE80211_CHAN_NO_IR))
scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
else
scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
--- a/drivers/net/wireless/iwlegacy/common.c
+++ b/drivers/net/wireless/iwlegacy/common.c
@@ -3447,10 +3447,10 @@ il_init_geos(struct il_priv *il)
if (il_is_channel_valid(ch)) {
if (!(ch->flags & EEPROM_CHANNEL_IBSS))
- geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
+ geo_ch->flags |= IEEE80211_CHAN_NO_IR;
if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
- geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+ geo_ch->flags |= IEEE80211_CHAN_NO_IR;
if (ch->flags & EEPROM_CHANNEL_RADAR)
geo_ch->flags |= IEEE80211_CHAN_RADAR;
--- a/drivers/net/wireless/iwlegacy/debug.c
+++ b/drivers/net/wireless/iwlegacy/debug.c
@@ -567,12 +567,12 @@ il_dbgfs_channels_read(struct file *file
flags & IEEE80211_CHAN_RADAR ?
" (IEEE 802.11h required)" : "",
((channels[i].
- flags & IEEE80211_CHAN_NO_IBSS) ||
+ flags & IEEE80211_CHAN_NO_IR) ||
(channels[i].
flags & IEEE80211_CHAN_RADAR)) ? "" :
", IBSS",
channels[i].
- flags & IEEE80211_CHAN_PASSIVE_SCAN ?
+ flags & IEEE80211_CHAN_NO_IR ?
"passive only" : "active/passive");
}
supp_band = il_get_hw_mode(il, IEEE80211_BAND_5GHZ);
@@ -594,12 +594,12 @@ il_dbgfs_channels_read(struct file *file
flags & IEEE80211_CHAN_RADAR ?
" (IEEE 802.11h required)" : "",
((channels[i].
- flags & IEEE80211_CHAN_NO_IBSS) ||
+ flags & IEEE80211_CHAN_NO_IR) ||
(channels[i].
flags & IEEE80211_CHAN_RADAR)) ? "" :
", IBSS",
channels[i].
- flags & IEEE80211_CHAN_PASSIVE_SCAN ?
+ flags & IEEE80211_CHAN_NO_IR ?
"passive only" : "active/passive");
}
ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
--- a/drivers/net/wireless/iwlwifi/dvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/dvm/debugfs.c
@@ -352,12 +352,12 @@ static ssize_t iwl_dbgfs_channels_read(s
channels[i].max_power,
channels[i].flags & IEEE80211_CHAN_RADAR ?
" (IEEE 802.11h required)" : "",
- ((channels[i].flags & IEEE80211_CHAN_NO_IBSS)
+ ((channels[i].flags & IEEE80211_CHAN_NO_IR)
|| (channels[i].flags &
IEEE80211_CHAN_RADAR)) ? "" :
", IBSS",
channels[i].flags &
- IEEE80211_CHAN_PASSIVE_SCAN ?
+ IEEE80211_CHAN_NO_IR ?
"passive only" : "active/passive");
}
supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_5GHZ);
@@ -375,12 +375,12 @@ static ssize_t iwl_dbgfs_channels_read(s
channels[i].max_power,
channels[i].flags & IEEE80211_CHAN_RADAR ?
" (IEEE 802.11h required)" : "",
- ((channels[i].flags & IEEE80211_CHAN_NO_IBSS)
+ ((channels[i].flags & IEEE80211_CHAN_NO_IR)
|| (channels[i].flags &
IEEE80211_CHAN_RADAR)) ? "" :
", IBSS",
channels[i].flags &
- IEEE80211_CHAN_PASSIVE_SCAN ?
+ IEEE80211_CHAN_NO_IR ?
"passive only" : "active/passive");
}
ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
--- a/drivers/net/wireless/iwlwifi/dvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/dvm/scan.c
@@ -544,7 +544,7 @@ static int iwl_get_channels_for_scan(str
channel = chan->hw_value;
scan_ch->channel = cpu_to_le16(channel);
- if (!is_active || (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
+ if (!is_active || (chan->flags & IEEE80211_CHAN_NO_IR))
scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
else
scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
@@ -614,10 +614,10 @@ static int iwl_init_channel_map(struct d
channel->flags = IEEE80211_CHAN_NO_HT40;
if (!(eeprom_ch->flags & EEPROM_CHANNEL_IBSS))
- channel->flags |= IEEE80211_CHAN_NO_IBSS;
+ channel->flags |= IEEE80211_CHAN_NO_IR;
if (!(eeprom_ch->flags & EEPROM_CHANNEL_ACTIVE))
- channel->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+ channel->flags |= IEEE80211_CHAN_NO_IR;
if (eeprom_ch->flags & EEPROM_CHANNEL_RADAR)
channel->flags |= IEEE80211_CHAN_RADAR;
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -223,10 +223,10 @@ static int iwl_init_channel_map(struct d
channel->flags |= IEEE80211_CHAN_NO_160MHZ;
if (!(ch_flags & NVM_CHANNEL_IBSS))
- channel->flags |= IEEE80211_CHAN_NO_IBSS;
+ channel->flags |= IEEE80211_CHAN_NO_IR;
if (!(ch_flags & NVM_CHANNEL_ACTIVE))
- channel->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+ channel->flags |= IEEE80211_CHAN_NO_IR;
if (ch_flags & NVM_CHANNEL_RADAR)
channel->flags |= IEEE80211_CHAN_RADAR;
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -192,7 +192,7 @@ static void iwl_mvm_scan_fill_channels(s
for (i = 0; i < cmd->channel_count; i++) {
chan->channel = cpu_to_le16(req->channels[i]->hw_value);
chan->type = cpu_to_le32(type);
- if (req->channels[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN)
+ if (req->channels[i]->flags & IEEE80211_CHAN_NO_IR)
chan->type &= cpu_to_le32(~SCAN_CHANNEL_TYPE_ACTIVE);
chan->active_dwell = cpu_to_le16(active_dwell);
chan->passive_dwell = cpu_to_le16(passive_dwell);
@@ -642,7 +642,7 @@ static void iwl_build_channel_cfg(struct
channels->iter_count[index] = cpu_to_le16(1);
channels->iter_interval[index] = 0;
- if (!(s_band->channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
+ if (!(s_band->channels[i].flags & IEEE80211_CHAN_NO_IR))
channels->type[index] |=
cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_ACTIVE);
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -159,7 +159,7 @@ static const struct ieee80211_regdomain
.reg_rules = {
REG_RULE(2412-10, 2462+10, 40, 0, 20, 0),
REG_RULE(5725-10, 5850+10, 40, 0, 30,
- NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS),
+ NL80211_RRF_NO_IR),
}
};
@@ -1485,7 +1485,7 @@ static void hw_scan_work(struct work_str
req->channels[hwsim->scan_chan_idx]->center_freq);
hwsim->tmp_chan = req->channels[hwsim->scan_chan_idx];
- if (hwsim->tmp_chan->flags & IEEE80211_CHAN_PASSIVE_SCAN ||
+ if (hwsim->tmp_chan->flags & IEEE80211_CHAN_NO_IR ||
!req->n_ssids) {
dwell = 120;
} else {
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -50,24 +50,24 @@ static const struct ieee80211_regdomain
REG_RULE(2412-10, 2462+10, 40, 3, 20, 0),
/* Channel 12 - 13 */
REG_RULE(2467-10, 2472+10, 20, 3, 20,
- NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS),
+ NL80211_RRF_NO_IR),
/* Channel 14 */
REG_RULE(2484-10, 2484+10, 20, 3, 20,
- NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS |
+ NL80211_RRF_NO_IR |
NL80211_RRF_NO_OFDM),
/* Channel 36 - 48 */
REG_RULE(5180-10, 5240+10, 40, 3, 20,
- NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS),
+ NL80211_RRF_NO_IR),
/* Channel 149 - 165 */
REG_RULE(5745-10, 5825+10, 40, 3, 20,
- NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS),
+ NL80211_RRF_NO_IR),
/* Channel 52 - 64 */
REG_RULE(5260-10, 5320+10, 40, 3, 30,
- NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS |
+ NL80211_RRF_NO_IR |
NL80211_RRF_DFS),
/* Channel 100 - 140 */
REG_RULE(5500-10, 5700+10, 40, 3, 30,
- NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS |
+ NL80211_RRF_NO_IR |
NL80211_RRF_DFS),
}
};
@@ -1968,7 +1968,7 @@ mwifiex_cfg80211_scan(struct wiphy *wiph
user_scan_cfg->chan_list[i].chan_number = chan->hw_value;
user_scan_cfg->chan_list[i].radio_type = chan->band;
- if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)
+ if (chan->flags & IEEE80211_CHAN_NO_IR)
user_scan_cfg->chan_list[i].scan_type =
MWIFIEX_SCAN_TYPE_PASSIVE;
else
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -515,14 +515,14 @@ mwifiex_scan_create_channel_list(struct
scan_chan_list[chan_idx].max_scan_time =
cpu_to_le16((u16) user_scan_in->
chan_list[0].scan_time);
- else if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
+ else if (ch->flags & IEEE80211_CHAN_NO_IR)
scan_chan_list[chan_idx].max_scan_time =
cpu_to_le16(adapter->passive_scan_time);
else
scan_chan_list[chan_idx].max_scan_time =
cpu_to_le16(adapter->active_scan_time);
- if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
+ if (ch->flags & IEEE80211_CHAN_NO_IR)
scan_chan_list[chan_idx].chan_scan_mode_bitmap
|= MWIFIEX_PASSIVE_SCAN;
else
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -146,7 +146,7 @@ void rt2x00queue_remove_l2pad(struct sk_
* @local: frame is not from mac80211
*/
int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
- bool local);
+ struct ieee80211_sta *sta, bool local);
/**
* rt2x00queue_update_beacon - Send new beacon from mac80211
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -90,7 +90,7 @@ static int rt2x00mac_tx_rts_cts(struct r
frag_skb->data, data_length, tx_info,
(struct ieee80211_rts *)(skb->data));
- retval = rt2x00queue_write_tx_frame(queue, skb, true);
+ retval = rt2x00queue_write_tx_frame(queue, skb, NULL, true);
if (retval) {
dev_kfree_skb_any(skb);
rt2x00_warn(rt2x00dev, "Failed to send RTS/CTS frame\n");
@@ -151,7 +151,7 @@ void rt2x00mac_tx(struct ieee80211_hw *h
goto exit_fail;
}
- if (unlikely(rt2x00queue_write_tx_frame(queue, skb, false)))
+ if (unlikely(rt2x00queue_write_tx_frame(queue, skb, control->sta, false)))
goto exit_fail;
/*
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -635,7 +635,7 @@ static void rt2x00queue_bar_check(struct
}
int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
- bool local)
+ struct ieee80211_sta *sta, bool local)
{
struct ieee80211_tx_info *tx_info;
struct queue_entry *entry;
@@ -649,7 +649,7 @@ int rt2x00queue_write_tx_frame(struct da
* after that we are free to use the skb->cb array
* for our information.
*/
- rt2x00queue_create_tx_descriptor(queue->rt2x00dev, skb, &txdesc, NULL);
+ rt2x00queue_create_tx_descriptor(queue->rt2x00dev, skb, &txdesc, sta);
/*
* All information is retrieved from the skb->cb array,
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -416,7 +416,7 @@ static int rtl8187_init_urbs(struct ieee
struct rtl8187_rx_info *info;
int ret = 0;
- while (skb_queue_len(&priv->rx_queue) < 16) {
+ while (skb_queue_len(&priv->rx_queue) < 32) {
skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL);
if (!skb) {
ret = -ENOMEM;
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -1078,8 +1078,8 @@ u8 rtl_is_special_data(struct ieee80211_
ip = (struct iphdr *)((u8 *) skb->data + mac_hdr_len +
SNAP_SIZE + PROTOC_TYPE_SIZE);
- ether_type = *(u16 *) ((u8 *) skb->data + mac_hdr_len + SNAP_SIZE);
- /* ether_type = ntohs(ether_type); */
+ ether_type = be16_to_cpu(*(__be16 *)((u8 *)skb->data + mac_hdr_len +
+ SNAP_SIZE));
if (ETH_P_IP == ether_type) {
if (IPPROTO_UDP == ip->protocol) {
--- a/drivers/net/wireless/rtlwifi/regd.c
+++ b/drivers/net/wireless/rtlwifi/regd.c
@@ -59,30 +59,27 @@ static struct country_code_to_enum_rd al
*/
#define RTL819x_2GHZ_CH12_13 \
REG_RULE(2467-10, 2472+10, 40, 0, 20,\
- NL80211_RRF_PASSIVE_SCAN)
+ NL80211_RRF_NO_IR)
#define RTL819x_2GHZ_CH14 \
REG_RULE(2484-10, 2484+10, 40, 0, 20, \
- NL80211_RRF_PASSIVE_SCAN | \
+ NL80211_RRF_NO_IR | \
NL80211_RRF_NO_OFDM)
/* 5G chan 36 - chan 64*/
#define RTL819x_5GHZ_5150_5350 \
REG_RULE(5150-10, 5350+10, 40, 0, 30, \
- NL80211_RRF_PASSIVE_SCAN | \
- NL80211_RRF_NO_IBSS)
+ NL80211_RRF_NO_IR)
/* 5G chan 100 - chan 165*/
#define RTL819x_5GHZ_5470_5850 \
REG_RULE(5470-10, 5850+10, 40, 0, 30, \
- NL80211_RRF_PASSIVE_SCAN | \
- NL80211_RRF_NO_IBSS)
+ NL80211_RRF_NO_IR)
/* 5G chan 149 - chan 165*/
#define RTL819x_5GHZ_5725_5850 \
REG_RULE(5725-10, 5850+10, 40, 0, 30, \
- NL80211_RRF_PASSIVE_SCAN | \
- NL80211_RRF_NO_IBSS)
+ NL80211_RRF_NO_IR)
#define RTL819x_5GHZ_ALL \
(RTL819x_5GHZ_5150_5350, RTL819x_5GHZ_5470_5850)
@@ -185,16 +182,15 @@ static void _rtl_reg_apply_beaconing_fla
*regulatory_hint().
*/
- if (!(reg_rule->flags & NL80211_RRF_NO_IBSS))
- ch->flags &= ~IEEE80211_CHAN_NO_IBSS;
+ if (!(reg_rule->flags & NL80211_RRF_NO_IR))
+ ch->flags &= ~IEEE80211_CHAN_NO_IR;
if (!(reg_rule->
- flags & NL80211_RRF_PASSIVE_SCAN))
+ flags & NL80211_RRF_NO_IR))
ch->flags &=
- ~IEEE80211_CHAN_PASSIVE_SCAN;
+ ~IEEE80211_CHAN_NO_IR;
} else {
if (ch->beacon_found)
- ch->flags &= ~(IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN);
+ ch->flags &= ~IEEE80211_CHAN_NO_IR;
}
}
}
@@ -219,11 +215,11 @@ static void _rtl_reg_apply_active_scan_f
*/
if (initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) {
ch = &sband->channels[11]; /* CH 12 */
- if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
- ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
+ if (ch->flags & IEEE80211_CHAN_NO_IR)
+ ch->flags &= ~IEEE80211_CHAN_NO_IR;
ch = &sband->channels[12]; /* CH 13 */
- if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
- ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
+ if (ch->flags & IEEE80211_CHAN_NO_IR)
+ ch->flags &= ~IEEE80211_CHAN_NO_IR;
return;
}
@@ -237,17 +233,17 @@ static void _rtl_reg_apply_active_scan_f
ch = &sband->channels[11]; /* CH 12 */
reg_rule = freq_reg_info(wiphy, ch->center_freq);
if (!IS_ERR(reg_rule)) {
- if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
- if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
- ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
+ if (!(reg_rule->flags & NL80211_RRF_NO_IR))
+ if (ch->flags & IEEE80211_CHAN_NO_IR)
+ ch->flags &= ~IEEE80211_CHAN_NO_IR;
}
ch = &sband->channels[12]; /* CH 13 */
reg_rule = freq_reg_info(wiphy, ch->center_freq);
if (!IS_ERR(reg_rule)) {
- if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
- if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
- ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
+ if (!(reg_rule->flags & NL80211_RRF_NO_IR))
+ if (ch->flags & IEEE80211_CHAN_NO_IR)
+ ch->flags &= ~IEEE80211_CHAN_NO_IR;
}
}
@@ -284,8 +280,8 @@ static void _rtl_reg_apply_radar_flags(s
*/
if (!(ch->flags & IEEE80211_CHAN_DISABLED))
ch->flags |= IEEE80211_CHAN_RADAR |
- IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN;
+ IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_NO_IR;
}
}
--- a/drivers/net/wireless/ti/wl12xx/scan.c
+++ b/drivers/net/wireless/ti/wl12xx/scan.c
@@ -47,7 +47,7 @@ static int wl1271_get_scan_channels(stru
* In active scans, we only scan channels not
* marked as passive.
*/
- (passive || !(flags & IEEE80211_CHAN_PASSIVE_SCAN))) {
+ (passive || !(flags & IEEE80211_CHAN_NO_IR))) {
wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
req->channels[i]->band,
req->channels[i]->center_freq);
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -1688,7 +1688,7 @@ int wlcore_cmd_regdomain_config_locked(s
if (channel->flags & (IEEE80211_CHAN_DISABLED |
IEEE80211_CHAN_RADAR |
- IEEE80211_CHAN_PASSIVE_SCAN))
+ IEEE80211_CHAN_NO_IR))
continue;
ch_bit_idx = wlcore_get_reg_conf_ch_idx(b, ch);
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -91,8 +91,7 @@ static void wl1271_reg_notify(struct wip
continue;
if (ch->flags & IEEE80211_CHAN_RADAR)
- ch->flags |= IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN;
+ ch->flags |= IEEE80211_CHAN_NO_IR;
}
--- a/drivers/net/wireless/ti/wlcore/scan.c
+++ b/drivers/net/wireless/ti/wlcore/scan.c
@@ -189,14 +189,14 @@ wlcore_scan_get_channels(struct wl1271 *
flags = req_channels[i]->flags;
if (force_passive)
- flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+ flags |= IEEE80211_CHAN_NO_IR;
if ((req_channels[i]->band == band) &&
!(flags & IEEE80211_CHAN_DISABLED) &&
(!!(flags & IEEE80211_CHAN_RADAR) == radar) &&
/* if radar is set, we ignore the passive flag */
(radar ||
- !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) {
+ !!(flags & IEEE80211_CHAN_NO_IR) == passive)) {
if (flags & IEEE80211_CHAN_RADAR) {
@@ -221,7 +221,7 @@ wlcore_scan_get_channels(struct wl1271 *
(band == IEEE80211_BAND_2GHZ) &&
(channels[j].channel >= 12) &&
(channels[j].channel <= 14) &&
- (flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
+ (flags & IEEE80211_CHAN_NO_IR) &&
!force_passive) {
/* pactive channels treated as DFS */
channels[j].flags = SCAN_CHANNEL_FLAGS_DFS;
@@ -244,7 +244,7 @@ wlcore_scan_get_channels(struct wl1271 *
max_dwell_time_active,
flags & IEEE80211_CHAN_RADAR ?
", DFS" : "",
- flags & IEEE80211_CHAN_PASSIVE_SCAN ?
+ flags & IEEE80211_CHAN_NO_IR ?
", PASSIVE" : "");
j++;
}
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -91,9 +91,8 @@ enum ieee80211_band {
* Channel flags set by the regulatory control code.
*
* @IEEE80211_CHAN_DISABLED: This channel is disabled.
- * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
- * on this channel.
- * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
+ * @IEEE80211_CHAN_NO_IR: do not initiate radiation, this includes
+ * sending probe requests or beaconing.
* @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
* @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
* is not permitted.
@@ -113,8 +112,8 @@ enum ieee80211_band {
*/
enum ieee80211_channel_flags {
IEEE80211_CHAN_DISABLED = 1<<0,
- IEEE80211_CHAN_PASSIVE_SCAN = 1<<1,
- IEEE80211_CHAN_NO_IBSS = 1<<2,
+ IEEE80211_CHAN_NO_IR = 1<<1,
+ /* hole at 1<<2 */
IEEE80211_CHAN_RADAR = 1<<3,
IEEE80211_CHAN_NO_HT40PLUS = 1<<4,
IEEE80211_CHAN_NO_HT40MINUS = 1<<5,
@@ -4149,6 +4148,7 @@ void cfg80211_radar_event(struct wiphy *
/**
* cfg80211_cac_event - Channel availability check (CAC) event
* @netdev: network device
+ * @chandef: chandef for the current channel
* @event: type of event
* @gfp: context flags
*
@@ -4157,6 +4157,7 @@ void cfg80211_radar_event(struct wiphy *
* also by full-MAC drivers.
*/
void cfg80211_cac_event(struct net_device *netdev,
+ const struct cfg80211_chan_def *chandef,
enum nl80211_radar_event event, gfp_t gfp);
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1508,6 +1508,9 @@ enum nl80211_commands {
* to react to radar events, e.g. initiate a channel switch or leave the
* IBSS network.
*
+ * @NL80211_ATTR_SUPPORT_5_10_MHZ: A flag indicating that the device supports
+ * 5 MHz and 10 MHz channel bandwidth.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1824,6 +1827,8 @@ enum nl80211_attrs {
NL80211_ATTR_HANDLE_DFS,
+ NL80211_ATTR_SUPPORT_5_10_MHZ,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2224,10 +2229,9 @@ enum nl80211_band_attr {
* @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
* @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
* regulatory domain.
- * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
- * permitted on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
- * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
+ * are permitted on this channel, this includes sending probe
+ * requests, or modes of operation that require beaconing.
* @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
* on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
@@ -2254,8 +2258,8 @@ enum nl80211_frequency_attr {
__NL80211_FREQUENCY_ATTR_INVALID,
NL80211_FREQUENCY_ATTR_FREQ,
NL80211_FREQUENCY_ATTR_DISABLED,
- NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
- NL80211_FREQUENCY_ATTR_NO_IBSS,
+ NL80211_FREQUENCY_ATTR_NO_IR,
+ __NL80211_FREQUENCY_ATTR_NO_IBSS,
NL80211_FREQUENCY_ATTR_RADAR,
NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
NL80211_FREQUENCY_ATTR_DFS_STATE,
@@ -2271,6 +2275,9 @@ enum nl80211_frequency_attr {
};
#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
+#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR
+#define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR
+#define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR
/**
* enum nl80211_bitrate_attr - bitrate attributes
@@ -2413,8 +2420,9 @@ enum nl80211_sched_scan_match_attr {
* @NL80211_RRF_DFS: DFS support is required to be used
* @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
* @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
- * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
- * @NL80211_RRF_NO_IBSS: no IBSS is allowed
+ * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
+ * this includes probe requests or modes of operation that require
+ * beaconing.
*/
enum nl80211_reg_rule_flags {
NL80211_RRF_NO_OFDM = 1<<0,
@@ -2424,10 +2432,17 @@ enum nl80211_reg_rule_flags {
NL80211_RRF_DFS = 1<<4,
NL80211_RRF_PTP_ONLY = 1<<5,
NL80211_RRF_PTMP_ONLY = 1<<6,
- NL80211_RRF_PASSIVE_SCAN = 1<<7,
- NL80211_RRF_NO_IBSS = 1<<8,
+ NL80211_RRF_NO_IR = 1<<7,
+ __NL80211_RRF_NO_IBSS = 1<<8,
};
+#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
+#define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR
+#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR
+
+/* For backport compatibility with older userspace */
+#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
+
/**
* enum nl80211_dfs_regions - regulatory DFS regions
*
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1050,6 +1050,7 @@ static int ieee80211_stop_ap(struct wiph
struct ieee80211_local *local = sdata->local;
struct beacon_data *old_beacon;
struct probe_resp *old_probe_resp;
+ struct cfg80211_chan_def chandef;
old_beacon = rtnl_dereference(sdata->u.ap.beacon);
if (!old_beacon)
@@ -1091,8 +1092,10 @@ static int ieee80211_stop_ap(struct wiph
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
if (sdata->wdev.cac_started) {
+ chandef = sdata->vif.bss_conf.chandef;
cancel_delayed_work_sync(&sdata->dfs_cac_timer_work);
- cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_ABORTED,
+ cfg80211_cac_event(sdata->dev, &chandef,
+ NL80211_RADAR_CAC_ABORTED,
GFP_KERNEL);
}
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -749,6 +749,7 @@ static void ieee80211_do_stop(struct iee
u32 hw_reconf_flags = 0;
int i, flushed;
struct ps_data *ps;
+ struct cfg80211_chan_def chandef;
clear_bit(SDATA_STATE_RUNNING, &sdata->state);
@@ -828,11 +829,13 @@ static void ieee80211_do_stop(struct iee
cancel_delayed_work_sync(&sdata->dfs_cac_timer_work);
if (sdata->wdev.cac_started) {
+ chandef = sdata->vif.bss_conf.chandef;
WARN_ON(local->suspended);
mutex_lock(&local->iflist_mtx);
ieee80211_vif_release_channel(sdata);
mutex_unlock(&local->iflist_mtx);
- cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_ABORTED,
+ cfg80211_cac_event(sdata->dev, &chandef,
+ NL80211_RADAR_CAC_ABORTED,
GFP_KERNEL);
}
@@ -1340,7 +1343,6 @@ static void ieee80211_setup_sdata(struct
sdata->vif.bss_conf.bssid = NULL;
break;
case NL80211_IFTYPE_AP_VLAN:
- break;
case NL80211_IFTYPE_P2P_DEVICE:
sdata->vif.bss_conf.bssid = sdata->vif.addr;
break;
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1398,10 +1398,12 @@ void ieee80211_dfs_cac_timer_work(struct
struct ieee80211_sub_if_data *sdata =
container_of(delayed_work, struct ieee80211_sub_if_data,
dfs_cac_timer_work);
+ struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef;
ieee80211_vif_release_channel(sdata);
-
- cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_FINISHED, GFP_KERNEL);
+ cfg80211_cac_event(sdata->dev, &chandef,
+ NL80211_RADAR_CAC_FINISHED,
+ GFP_KERNEL);
}
/* MLME */
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -729,9 +729,7 @@ static void ieee80211_release_reorder_fr
lockdep_assert_held(&tid_agg_rx->reorder_lock);
while (ieee80211_sn_less(tid_agg_rx->head_seq_num, head_seq_num)) {
- index = ieee80211_sn_sub(tid_agg_rx->head_seq_num,
- tid_agg_rx->ssn) %
- tid_agg_rx->buf_size;
+ index = tid_agg_rx->head_seq_num % tid_agg_rx->buf_size;
ieee80211_release_reorder_frame(sdata, tid_agg_rx, index,
frames);
}
@@ -757,8 +755,7 @@ static void ieee80211_sta_reorder_releas
lockdep_assert_held(&tid_agg_rx->reorder_lock);
/* release the buffer until next missing frame */
- index = ieee80211_sn_sub(tid_agg_rx->head_seq_num,
- tid_agg_rx->ssn) % tid_agg_rx->buf_size;
+ index = tid_agg_rx->head_seq_num % tid_agg_rx->buf_size;
if (!tid_agg_rx->reorder_buf[index] &&
tid_agg_rx->stored_mpdu_num) {
/*
@@ -793,15 +790,11 @@ static void ieee80211_sta_reorder_releas
} else while (tid_agg_rx->reorder_buf[index]) {
ieee80211_release_reorder_frame(sdata, tid_agg_rx, index,
frames);
- index = ieee80211_sn_sub(tid_agg_rx->head_seq_num,
- tid_agg_rx->ssn) %
- tid_agg_rx->buf_size;
+ index = tid_agg_rx->head_seq_num % tid_agg_rx->buf_size;
}
if (tid_agg_rx->stored_mpdu_num) {
- j = index = ieee80211_sn_sub(tid_agg_rx->head_seq_num,
- tid_agg_rx->ssn) %
- tid_agg_rx->buf_size;
+ j = index = tid_agg_rx->head_seq_num % tid_agg_rx->buf_size;
for (; j != (index - 1) % tid_agg_rx->buf_size;
j = (j + 1) % tid_agg_rx->buf_size) {
@@ -861,8 +854,7 @@ static bool ieee80211_sta_manage_reorder
/* Now the new frame is always in the range of the reordering buffer */
- index = ieee80211_sn_sub(mpdu_seq_num,
- tid_agg_rx->ssn) % tid_agg_rx->buf_size;
+ index = mpdu_seq_num % tid_agg_rx->buf_size;
/* check if we already stored this frame */
if (tid_agg_rx->reorder_buf[index]) {
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -526,7 +526,7 @@ static int __ieee80211_start_scan(struct
ieee80211_hw_config(local, 0);
if ((req->channels[0]->flags &
- IEEE80211_CHAN_PASSIVE_SCAN) ||
+ IEEE80211_CHAN_NO_IR) ||
!local->scan_req->n_ssids) {
next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
} else {
@@ -572,7 +572,7 @@ ieee80211_scan_get_channel_time(struct i
* TODO: channel switching also consumes quite some time,
* add that delay as well to get a better estimation
*/
- if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)
+ if (chan->flags & IEEE80211_CHAN_NO_IR)
return IEEE80211_PASSIVE_CHANNEL_TIME;
return IEEE80211_PROBE_DELAY + IEEE80211_CHANNEL_TIME;
}
@@ -696,7 +696,7 @@ static void ieee80211_scan_state_set_cha
*
* In any case, it is not necessary for a passive scan.
*/
- if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN ||
+ if (chan->flags & IEEE80211_CHAN_NO_IR ||
!local->scan_req->n_ssids) {
*next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
local->next_scan_state = SCAN_DECISION;
@@ -881,7 +881,7 @@ int ieee80211_request_ibss_scan(struct i
struct ieee80211_channel *tmp_ch =
&local->hw.wiphy->bands[band]->channels[i];
- if (tmp_ch->flags & (IEEE80211_CHAN_NO_IBSS |
+ if (tmp_ch->flags & (IEEE80211_CHAN_NO_IR |
IEEE80211_CHAN_DISABLED))
continue;
@@ -895,7 +895,7 @@ int ieee80211_request_ibss_scan(struct i
local->int_scan_req->n_channels = n_ch;
} else {
- if (WARN_ON_ONCE(chan->flags & (IEEE80211_CHAN_NO_IBSS |
+ if (WARN_ON_ONCE(chan->flags & (IEEE80211_CHAN_NO_IR |
IEEE80211_CHAN_DISABLED)))
goto unlock;
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1728,8 +1728,7 @@ netdev_tx_t ieee80211_monitor_start_xmit
* radar detection by itself. We can do that later by adding a
* monitor flag interfaces used for AP support.
*/
- if ((chan->flags & (IEEE80211_CHAN_NO_IBSS | IEEE80211_CHAN_RADAR |
- IEEE80211_CHAN_PASSIVE_SCAN)))
+ if ((chan->flags & (IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_RADAR)))
goto fail_rcu;
ieee80211_xmit(sdata, skb, chan->band);
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2259,14 +2259,17 @@ u64 ieee80211_calculate_rx_timestamp(str
void ieee80211_dfs_cac_cancel(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
+ struct cfg80211_chan_def chandef;
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
cancel_delayed_work_sync(&sdata->dfs_cac_timer_work);
if (sdata->wdev.cac_started) {
+ chandef = sdata->vif.bss_conf.chandef;
ieee80211_vif_release_channel(sdata);
cfg80211_cac_event(sdata->dev,
+ &chandef,
NL80211_RADAR_CAC_ABORTED,
GFP_KERNEL);
}
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -277,6 +277,32 @@ void cfg80211_set_dfs_state(struct wiphy
width, dfs_state);
}
+static u32 cfg80211_get_start_freq(u32 center_freq,
+ u32 bandwidth)
+{
+ u32 start_freq;
+
+ if (bandwidth <= 20)
+ start_freq = center_freq;
+ else
+ start_freq = center_freq - bandwidth/2 + 10;
+
+ return start_freq;
+}
+
+static u32 cfg80211_get_end_freq(u32 center_freq,
+ u32 bandwidth)
+{
+ u32 end_freq;
+
+ if (bandwidth <= 20)
+ end_freq = center_freq;
+ else
+ end_freq = center_freq + bandwidth/2 - 10;
+
+ return end_freq;
+}
+
static int cfg80211_get_chans_dfs_required(struct wiphy *wiphy,
u32 center_freq,
u32 bandwidth)
@@ -284,13 +310,8 @@ static int cfg80211_get_chans_dfs_requir
struct ieee80211_channel *c;
u32 freq, start_freq, end_freq;
- if (bandwidth <= 20) {
- start_freq = center_freq;
- end_freq = center_freq;
- } else {
- start_freq = center_freq - bandwidth/2 + 10;
- end_freq = center_freq + bandwidth/2 - 10;
- }
+ start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
+ end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
for (freq = start_freq; freq <= end_freq; freq += 20) {
c = ieee80211_get_channel(wiphy, freq);
@@ -330,33 +351,159 @@ int cfg80211_chandef_dfs_required(struct
}
EXPORT_SYMBOL(cfg80211_chandef_dfs_required);
-static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy,
- u32 center_freq, u32 bandwidth,
- u32 prohibited_flags)
+static int cfg80211_get_chans_dfs_usable(struct wiphy *wiphy,
+ u32 center_freq,
+ u32 bandwidth)
{
struct ieee80211_channel *c;
u32 freq, start_freq, end_freq;
+ int count = 0;
- if (bandwidth <= 20) {
- start_freq = center_freq;
- end_freq = center_freq;
- } else {
- start_freq = center_freq - bandwidth/2 + 10;
- end_freq = center_freq + bandwidth/2 - 10;
+ start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
+ end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
+
+ /*
+ * Check entire range of channels for the bandwidth.
+ * Check all channels are DFS channels (DFS_USABLE or
+ * DFS_AVAILABLE). Return number of usable channels
+ * (require CAC). Allow DFS and non-DFS channel mix.
+ */
+ for (freq = start_freq; freq <= end_freq; freq += 20) {
+ c = ieee80211_get_channel(wiphy, freq);
+ if (!c)
+ return -EINVAL;
+
+ if (c->flags & IEEE80211_CHAN_DISABLED)
+ return -EINVAL;
+
+ if (c->flags & IEEE80211_CHAN_RADAR) {
+ if (c->dfs_state == NL80211_DFS_UNAVAILABLE)
+ return -EINVAL;
+
+ if (c->dfs_state == NL80211_DFS_USABLE)
+ count++;
+ }
+ }
+
+ return count;
+}
+
+bool cfg80211_chandef_dfs_usable(struct wiphy *wiphy,
+ const struct cfg80211_chan_def *chandef)
+{
+ int width;
+ int r1, r2 = 0;
+
+ if (WARN_ON(!cfg80211_chandef_valid(chandef)))
+ return false;
+
+ width = cfg80211_chandef_get_width(chandef);
+ if (width < 0)
+ return false;
+
+ r1 = cfg80211_get_chans_dfs_usable(wiphy, chandef->center_freq1,
+ width);
+
+ if (r1 < 0)
+ return false;
+
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_80P80:
+ WARN_ON(!chandef->center_freq2);
+ r2 = cfg80211_get_chans_dfs_usable(wiphy,
+ chandef->center_freq2,
+ width);
+ if (r2 < 0)
+ return false;
+ break;
+ default:
+ WARN_ON(chandef->center_freq2);
+ break;
}
+ return (r1 + r2 > 0);
+}
+
+
+static bool cfg80211_get_chans_dfs_available(struct wiphy *wiphy,
+ u32 center_freq,
+ u32 bandwidth)
+{
+ struct ieee80211_channel *c;
+ u32 freq, start_freq, end_freq;
+
+ start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
+ end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
+
+ /*
+ * Check entire range of channels for the bandwidth.
+ * If any channel in between is disabled or has not
+ * had gone through CAC return false
+ */
for (freq = start_freq; freq <= end_freq; freq += 20) {
c = ieee80211_get_channel(wiphy, freq);
if (!c)
return false;
- /* check for radar flags */
- if ((prohibited_flags & c->flags & IEEE80211_CHAN_RADAR) &&
+ if (c->flags & IEEE80211_CHAN_DISABLED)
+ return false;
+
+ if ((c->flags & IEEE80211_CHAN_RADAR) &&
(c->dfs_state != NL80211_DFS_AVAILABLE))
return false;
+ }
+
+ return true;
+}
+
+static bool cfg80211_chandef_dfs_available(struct wiphy *wiphy,
+ const struct cfg80211_chan_def *chandef)
+{
+ int width;
+ int r;
+
+ if (WARN_ON(!cfg80211_chandef_valid(chandef)))
+ return false;
- /* check for the other flags */
- if (c->flags & prohibited_flags & ~IEEE80211_CHAN_RADAR)
+ width = cfg80211_chandef_get_width(chandef);
+ if (width < 0)
+ return false;
+
+ r = cfg80211_get_chans_dfs_available(wiphy, chandef->center_freq1,
+ width);
+
+ /* If any of channels unavailable for cf1 just return */
+ if (!r)
+ return r;
+
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_80P80:
+ WARN_ON(!chandef->center_freq2);
+ r = cfg80211_get_chans_dfs_available(wiphy,
+ chandef->center_freq2,
+ width);
+ default:
+ WARN_ON(chandef->center_freq2);
+ break;
+ }
+
+ return r;
+}
+
+
+static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy,
+ u32 center_freq, u32 bandwidth,
+ u32 prohibited_flags)
+{
+ struct ieee80211_channel *c;
+ u32 freq, start_freq, end_freq;
+
+ start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
+ end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
+
+ for (freq = start_freq; freq <= end_freq; freq += 20) {
+ c = ieee80211_get_channel(wiphy, freq);
+ if (!c || c->flags & prohibited_flags)
return false;
}
@@ -462,14 +609,19 @@ bool cfg80211_reg_can_beacon(struct wiph
struct cfg80211_chan_def *chandef)
{
bool res;
+ u32 prohibited_flags = IEEE80211_CHAN_DISABLED |
+ IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_RADAR;
trace_cfg80211_reg_can_beacon(wiphy, chandef);
- res = cfg80211_chandef_usable(wiphy, chandef,
- IEEE80211_CHAN_DISABLED |
- IEEE80211_CHAN_PASSIVE_SCAN |
- IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_RADAR);
+ if (cfg80211_chandef_dfs_required(wiphy, chandef) > 0 &&
+ cfg80211_chandef_dfs_available(wiphy, chandef)) {
+ /* We can skip IEEE80211_CHAN_NO_IR if chandef dfs available */
+ prohibited_flags = IEEE80211_CHAN_DISABLED;
+ }
+
+ res = cfg80211_chandef_usable(wiphy, chandef, prohibited_flags);
trace_cfg80211_return_bool(res);
return res;
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -382,6 +382,19 @@ int cfg80211_can_use_iftype_chan(struct
enum cfg80211_chan_mode chanmode,
u8 radar_detect);
+/**
+ * cfg80211_chandef_dfs_usable - checks if chandef is DFS usable
+ * @wiphy: the wiphy to validate against
+ * @chandef: the channel definition to check
+ *
+ * Checks if chandef is usable and we can/need start CAC on such channel.
+ *
+ * Return: Return true if all channels available and at least
+ * one channel require CAC (NL80211_DFS_USABLE)
+ */
+bool cfg80211_chandef_dfs_usable(struct wiphy *wiphy,
+ const struct cfg80211_chan_def *chandef);
+
void cfg80211_set_dfs_state(struct wiphy *wiphy,
const struct cfg80211_chan_def *chandef,
enum nl80211_dfs_state dfs_state);
--- a/net/wireless/genregdb.awk
+++ b/net/wireless/genregdb.awk
@@ -107,10 +107,13 @@ active && /^[ \t]*\(/ {
} else if (flagarray[arg] == "PTMP-ONLY") {
flags = flags "\n\t\t\tNL80211_RRF_PTMP_ONLY | "
} else if (flagarray[arg] == "PASSIVE-SCAN") {
- flags = flags "\n\t\t\tNL80211_RRF_PASSIVE_SCAN | "
+ flags = flags "\n\t\t\tNL80211_RRF_NO_IR | "
} else if (flagarray[arg] == "NO-IBSS") {
- flags = flags "\n\t\t\tNL80211_RRF_NO_IBSS | "
+ flags = flags "\n\t\t\tNL80211_RRF_NO_IR | "
+ } else if (flagarray[arg] == "NO-IR") {
+ flags = flags "\n\t\t\tNL80211_RRF_NO_IR | "
}
+
}
flags = flags "0"
printf "\t\tREG_RULE(%d, %d, %d, %d, %d, %s),\n", start, end, bw, gain, power, flags
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -274,7 +274,7 @@ int cfg80211_ibss_wext_join(struct cfg80
for (i = 0; i < sband->n_channels; i++) {
chan = &sband->channels[i];
- if (chan->flags & IEEE80211_CHAN_NO_IBSS)
+ if (chan->flags & IEEE80211_CHAN_NO_IR)
continue;
if (chan->flags & IEEE80211_CHAN_DISABLED)
continue;
@@ -345,7 +345,7 @@ int cfg80211_ibss_wext_siwfreq(struct ne
chan = ieee80211_get_channel(wdev->wiphy, freq);
if (!chan)
return -EINVAL;
- if (chan->flags & IEEE80211_CHAN_NO_IBSS ||
+ if (chan->flags & IEEE80211_CHAN_NO_IR ||
chan->flags & IEEE80211_CHAN_DISABLED)
return -EINVAL;
}
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -141,8 +141,7 @@ int __cfg80211_join_mesh(struct cfg80211
for (i = 0; i < sband->n_channels; i++) {
chan = &sband->channels[i];
- if (chan->flags & (IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_PASSIVE_SCAN |
+ if (chan->flags & (IEEE80211_CHAN_NO_IR |
IEEE80211_CHAN_DISABLED |
IEEE80211_CHAN_RADAR))
continue;
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -763,12 +763,12 @@ void cfg80211_radar_event(struct wiphy *
EXPORT_SYMBOL(cfg80211_radar_event);
void cfg80211_cac_event(struct net_device *netdev,
+ const struct cfg80211_chan_def *chandef,
enum nl80211_radar_event event, gfp_t gfp)
{
struct wireless_dev *wdev = netdev->ieee80211_ptr;
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- struct cfg80211_chan_def chandef;
unsigned long timeout;
trace_cfg80211_cac_event(netdev, event);
@@ -779,14 +779,12 @@ void cfg80211_cac_event(struct net_devic
if (WARN_ON(!wdev->channel))
return;
- cfg80211_chandef_create(&chandef, wdev->channel, NL80211_CHAN_NO_HT);
-
switch (event) {
case NL80211_RADAR_CAC_FINISHED:
timeout = wdev->cac_start_time +
msecs_to_jiffies(IEEE80211_DFS_MIN_CAC_TIME_MS);
WARN_ON(!time_after_eq(jiffies, timeout));
- cfg80211_set_dfs_state(wiphy, &chandef, NL80211_DFS_AVAILABLE);
+ cfg80211_set_dfs_state(wiphy, chandef, NL80211_DFS_AVAILABLE);
break;
case NL80211_RADAR_CAC_ABORTED:
break;
@@ -796,6 +794,6 @@ void cfg80211_cac_event(struct net_devic
}
wdev->cac_started = false;
- nl80211_radar_notify(rdev, &chandef, event, netdev, gfp);
+ nl80211_radar_notify(rdev, chandef, event, netdev, gfp);
}
EXPORT_SYMBOL(cfg80211_cac_event);
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -545,12 +545,12 @@ static int nl80211_msg_put_channel(struc
if ((chan->flags & IEEE80211_CHAN_DISABLED) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_DISABLED))
goto nla_put_failure;
- if ((chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
- nla_put_flag(msg, NL80211_FREQUENCY_ATTR_PASSIVE_SCAN))
- goto nla_put_failure;
- if ((chan->flags & IEEE80211_CHAN_NO_IBSS) &&
- nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_IBSS))
- goto nla_put_failure;
+ if (chan->flags & IEEE80211_CHAN_NO_IR) {
+ if (nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_IR))
+ goto nla_put_failure;
+ if (nla_put_flag(msg, __NL80211_FREQUENCY_ATTR_NO_IBSS))
+ goto nla_put_failure;
+ }
if (chan->flags & IEEE80211_CHAN_RADAR) {
if (nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR))
goto nla_put_failure;
@@ -1229,7 +1229,7 @@ static int nl80211_send_wiphy(struct cfg
nla_put_flag(msg, NL80211_ATTR_TDLS_EXTERNAL_SETUP))
goto nla_put_failure;
if ((dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_5_10_MHZ) &&
- nla_put_flag(msg, WIPHY_FLAG_SUPPORTS_5_10_MHZ))
+ nla_put_flag(msg, NL80211_ATTR_SUPPORT_5_10_MHZ))
goto nla_put_failure;
state->split_start++;
@@ -2170,7 +2170,7 @@ static inline u64 wdev_id(struct wireles
}
static int nl80211_send_chandef(struct sk_buff *msg,
- struct cfg80211_chan_def *chandef)
+ const struct cfg80211_chan_def *chandef)
{
WARN_ON(!cfg80211_chandef_valid(chandef));
@@ -5653,7 +5653,7 @@ static int nl80211_start_radar_detection
if (err == 0)
return -EINVAL;
- if (chandef.chan->dfs_state != NL80211_DFS_USABLE)
+ if (!cfg80211_chandef_dfs_usable(wdev->wiphy, &chandef))
return -EINVAL;
if (!rdev->ops->start_radar_detection)
@@ -10882,7 +10882,7 @@ EXPORT_SYMBOL(cfg80211_cqm_txe_notify);
void
nl80211_radar_notify(struct cfg80211_registered_device *rdev,
- struct cfg80211_chan_def *chandef,
+ const struct cfg80211_chan_def *chandef,
enum nl80211_radar_event event,
struct net_device *netdev, gfp_t gfp)
{
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -70,7 +70,7 @@ int nl80211_send_mgmt(struct cfg80211_re
void
nl80211_radar_notify(struct cfg80211_registered_device *rdev,
- struct cfg80211_chan_def *chandef,
+ const struct cfg80211_chan_def *chandef,
enum nl80211_radar_event event,
struct net_device *netdev, gfp_t gfp);
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -163,35 +163,29 @@ static const struct ieee80211_regdomain
REG_RULE(2412-10, 2462+10, 40, 6, 20, 0),
/* IEEE 802.11b/g, channels 12..13. */
REG_RULE(2467-10, 2472+10, 40, 6, 20,
- NL80211_RRF_PASSIVE_SCAN |
- NL80211_RRF_NO_IBSS),
+ NL80211_RRF_NO_IR),
/* IEEE 802.11 channel 14 - Only JP enables
* this and for 802.11b only */
REG_RULE(2484-10, 2484+10, 20, 6, 20,
- NL80211_RRF_PASSIVE_SCAN |
- NL80211_RRF_NO_IBSS |
+ NL80211_RRF_NO_IR |
NL80211_RRF_NO_OFDM),
/* IEEE 802.11a, channel 36..48 */
REG_RULE(5180-10, 5240+10, 160, 6, 20,
- NL80211_RRF_PASSIVE_SCAN |
- NL80211_RRF_NO_IBSS),
+ NL80211_RRF_NO_IR),
/* IEEE 802.11a, channel 52..64 - DFS required */
REG_RULE(5260-10, 5320+10, 160, 6, 20,
- NL80211_RRF_PASSIVE_SCAN |
- NL80211_RRF_NO_IBSS |
+ NL80211_RRF_NO_IR |
NL80211_RRF_DFS),
/* IEEE 802.11a, channel 100..144 - DFS required */
REG_RULE(5500-10, 5720+10, 160, 6, 20,
- NL80211_RRF_PASSIVE_SCAN |
- NL80211_RRF_NO_IBSS |
+ NL80211_RRF_NO_IR |
NL80211_RRF_DFS),
/* IEEE 802.11a, channel 149..165 */
REG_RULE(5745-10, 5825+10, 80, 6, 20,
- NL80211_RRF_PASSIVE_SCAN |
- NL80211_RRF_NO_IBSS),
+ NL80211_RRF_NO_IR),
/* IEEE 802.11ad (60gHz), channels 1..3 */
REG_RULE(56160+2160*1-1080, 56160+2160*3+1080, 2160, 0, 0, 0),
@@ -698,10 +692,8 @@ regdom_intersect(const struct ieee80211_
static u32 map_regdom_flags(u32 rd_flags)
{
u32 channel_flags = 0;
- if (rd_flags & NL80211_RRF_PASSIVE_SCAN)
- channel_flags |= IEEE80211_CHAN_PASSIVE_SCAN;
- if (rd_flags & NL80211_RRF_NO_IBSS)
- channel_flags |= IEEE80211_CHAN_NO_IBSS;
+ if (rd_flags & NL80211_RRF_NO_IR_ALL)
+ channel_flags |= IEEE80211_CHAN_NO_IR;
if (rd_flags & NL80211_RRF_DFS)
channel_flags |= IEEE80211_CHAN_RADAR;
if (rd_flags & NL80211_RRF_NO_OFDM)
@@ -1066,13 +1058,8 @@ static void handle_reg_beacon(struct wip
chan_before.center_freq = chan->center_freq;
chan_before.flags = chan->flags;
- if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
- chan->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
- channel_changed = true;
- }
-
- if (chan->flags & IEEE80211_CHAN_NO_IBSS) {
- chan->flags &= ~IEEE80211_CHAN_NO_IBSS;
+ if (chan->flags & IEEE80211_CHAN_NO_IR) {
+ chan->flags &= ~IEEE80211_CHAN_NO_IR;
channel_changed = true;
}
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
@@ -0,0 +1,422 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/export.h>
+#include "ath9k.h"
+#include "reg.h"
+#include "hw-ops.h"
+
+const char *ath9k_hw_wow_event_to_string(u32 wow_event)
+{
+ if (wow_event & AH_WOW_MAGIC_PATTERN_EN)
+ return "Magic pattern";
+ if (wow_event & AH_WOW_USER_PATTERN_EN)
+ return "User pattern";
+ if (wow_event & AH_WOW_LINK_CHANGE)
+ return "Link change";
+ if (wow_event & AH_WOW_BEACON_MISS)
+ return "Beacon miss";
+
+ return "unknown reason";
+}
+EXPORT_SYMBOL(ath9k_hw_wow_event_to_string);
+
+static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
+
+ /* set rx disable bit */
+ REG_WRITE(ah, AR_CR, AR_CR_RXD);
+
+ if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0, AH_WAIT_TIMEOUT)) {
+ ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
+ REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
+ return;
+ }
+
+ REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
+}
+
+static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ u8 sta_mac_addr[ETH_ALEN], ap_mac_addr[ETH_ALEN];
+ u32 ctl[13] = {0};
+ u32 data_word[KAL_NUM_DATA_WORDS];
+ u8 i;
+ u32 wow_ka_data_word0;
+
+ memcpy(sta_mac_addr, common->macaddr, ETH_ALEN);
+ memcpy(ap_mac_addr, common->curbssid, ETH_ALEN);
+
+ /* set the transmit buffer */
+ ctl[0] = (KAL_FRAME_LEN | (MAX_RATE_POWER << 16));
+ ctl[1] = 0;
+ ctl[3] = 0xb; /* OFDM_6M hardware value for this rate */
+ ctl[4] = 0;
+ ctl[7] = (ah->txchainmask) << 2;
+ ctl[2] = 0xf << 16; /* tx_tries 0 */
+
+ for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
+ REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
+
+ REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
+
+ data_word[0] = (KAL_FRAME_TYPE << 2) | (KAL_FRAME_SUB_TYPE << 4) |
+ (KAL_TO_DS << 8) | (KAL_DURATION_ID << 16);
+ data_word[1] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
+ (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
+ data_word[2] = (sta_mac_addr[1] << 24) | (sta_mac_addr[0] << 16) |
+ (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
+ data_word[3] = (sta_mac_addr[5] << 24) | (sta_mac_addr[4] << 16) |
+ (sta_mac_addr[3] << 8) | (sta_mac_addr[2]);
+ data_word[4] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
+ (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
+ data_word[5] = (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
+
+ if (AR_SREV_9462_20(ah)) {
+ /* AR9462 2.0 has an extra descriptor word (time based
+ * discard) compared to other chips */
+ REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + (12 * 4)), 0);
+ wow_ka_data_word0 = AR_WOW_TXBUF(13);
+ } else {
+ wow_ka_data_word0 = AR_WOW_TXBUF(12);
+ }
+
+ for (i = 0; i < KAL_NUM_DATA_WORDS; i++)
+ REG_WRITE(ah, (wow_ka_data_word0 + i*4), data_word[i]);
+
+}
+
+void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
+ u8 *user_mask, int pattern_count,
+ int pattern_len)
+{
+ int i;
+ u32 pattern_val, mask_val;
+ u32 set, clr;
+
+ /* FIXME: should check count by querying the hardware capability */
+ if (pattern_count >= MAX_NUM_PATTERN)
+ return;
+
+ REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
+
+ /* set the registers for pattern */
+ for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
+ memcpy(&pattern_val, user_pattern, 4);
+ REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i),
+ pattern_val);
+ user_pattern += 4;
+ }
+
+ /* set the registers for mask */
+ for (i = 0; i < MAX_PATTERN_MASK_SIZE; i += 4) {
+ memcpy(&mask_val, user_mask, 4);
+ REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val);
+ user_mask += 4;
+ }
+
+ /* set the pattern length to be matched
+ *
+ * AR_WOW_LENGTH1_REG1
+ * bit 31:24 pattern 0 length
+ * bit 23:16 pattern 1 length
+ * bit 15:8 pattern 2 length
+ * bit 7:0 pattern 3 length
+ *
+ * AR_WOW_LENGTH1_REG2
+ * bit 31:24 pattern 4 length
+ * bit 23:16 pattern 5 length
+ * bit 15:8 pattern 6 length
+ * bit 7:0 pattern 7 length
+ *
+ * the below logic writes out the new
+ * pattern length for the corresponding
+ * pattern_count, while masking out the
+ * other fields
+ */
+
+ ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
+
+ if (pattern_count < 4) {
+ /* Pattern 0-3 uses AR_WOW_LENGTH1 register */
+ set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+ AR_WOW_LEN1_SHIFT(pattern_count);
+ clr = AR_WOW_LENGTH1_MASK(pattern_count);
+ REG_RMW(ah, AR_WOW_LENGTH1, set, clr);
+ } else {
+ /* Pattern 4-7 uses AR_WOW_LENGTH2 register */
+ set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+ AR_WOW_LEN2_SHIFT(pattern_count);
+ clr = AR_WOW_LENGTH2_MASK(pattern_count);
+ REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
+ }
+
+}
+EXPORT_SYMBOL(ath9k_hw_wow_apply_pattern);
+
+u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
+{
+ u32 wow_status = 0;
+ u32 val = 0, rval;
+
+ /*
+ * read the WoW status register to know
+ * the wakeup reason
+ */
+ rval = REG_READ(ah, AR_WOW_PATTERN);
+ val = AR_WOW_STATUS(rval);
+
+ /*
+ * mask only the WoW events that we have enabled. Sometimes
+ * we have spurious WoW events from the AR_WOW_PATTERN
+ * register. This mask will clean it up.
+ */
+
+ val &= ah->wow_event_mask;
+
+ if (val) {
+ if (val & AR_WOW_MAGIC_PAT_FOUND)
+ wow_status |= AH_WOW_MAGIC_PATTERN_EN;
+ if (AR_WOW_PATTERN_FOUND(val))
+ wow_status |= AH_WOW_USER_PATTERN_EN;
+ if (val & AR_WOW_KEEP_ALIVE_FAIL)
+ wow_status |= AH_WOW_LINK_CHANGE;
+ if (val & AR_WOW_BEACON_FAIL)
+ wow_status |= AH_WOW_BEACON_MISS;
+ }
+
+ /*
+ * set and clear WOW_PME_CLEAR registers for the chip to
+ * generate next wow signal.
+ * disable D3 before accessing other registers ?
+ */
+
+ /* do we need to check the bit value 0x01000000 (7-10) ?? */
+ REG_RMW(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_WOW_PME_CLR,
+ AR_PMCTRL_PWR_STATE_D1D3);
+
+ /*
+ * clear all events
+ */
+ REG_WRITE(ah, AR_WOW_PATTERN,
+ AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN)));
+
+ /*
+ * restore the beacon threshold to init value
+ */
+ REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
+
+ /*
+ * Restore the way the PCI-E reset, Power-On-Reset, external
+ * PCIE_POR_SHORT pins are tied to its original value.
+ * Previously just before WoW sleep, we untie the PCI-E
+ * reset to our Chip's Power On Reset so that any PCI-E
+ * reset from the bus will not reset our chip
+ */
+ if (ah->is_pciexpress)
+ ath9k_hw_configpcipowersave(ah, false);
+
+ ah->wow_event_mask = 0;
+
+ return wow_status;
+}
+EXPORT_SYMBOL(ath9k_hw_wow_wakeup);
+
+void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
+{
+ u32 wow_event_mask;
+ u32 set, clr;
+
+ /*
+ * wow_event_mask is a mask to the AR_WOW_PATTERN register to
+ * indicate which WoW events we have enabled. The WoW events
+ * are from the 'pattern_enable' in this function and
+ * 'pattern_count' of ath9k_hw_wow_apply_pattern()
+ */
+ wow_event_mask = ah->wow_event_mask;
+
+ /*
+ * Untie Power-on-Reset from the PCI-E-Reset. When we are in
+ * WOW sleep, we do want the Reset from the PCI-E to disturb
+ * our hw state
+ */
+ if (ah->is_pciexpress) {
+ /*
+ * we need to untie the internal POR (power-on-reset)
+ * to the external PCI-E reset. We also need to tie
+ * the PCI-E Phy reset to the PCI-E reset.
+ */
+ set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
+ clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
+ REG_RMW(ah, AR_WA, set, clr);
+ }
+
+ /*
+ * set the power states appropriately and enable PME
+ */
+ set = AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA |
+ AR_PMCTRL_AUX_PWR_DET | AR_PMCTRL_WOW_PME_CLR;
+
+ /*
+ * set and clear WOW_PME_CLEAR registers for the chip
+ * to generate next wow signal.
+ */
+ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
+ clr = AR_PMCTRL_WOW_PME_CLR;
+ REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+
+ /*
+ * Setup for:
+ * - beacon misses
+ * - magic pattern
+ * - keep alive timeout
+ * - pattern matching
+ */
+
+ /*
+ * Program default values for pattern backoff, aifs/slot/KAL count,
+ * beacon miss timeout, KAL timeout, etc.
+ */
+ set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
+ REG_SET_BIT(ah, AR_WOW_PATTERN, set);
+
+ set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
+ AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
+ AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT);
+ REG_SET_BIT(ah, AR_WOW_COUNT, set);
+
+ if (pattern_enable & AH_WOW_BEACON_MISS)
+ set = AR_WOW_BEACON_TIMO;
+ /* We are not using beacon miss, program a large value */
+ else
+ set = AR_WOW_BEACON_TIMO_MAX;
+
+ REG_WRITE(ah, AR_WOW_BCN_TIMO, set);
+
+ /*
+ * Keep alive timo in ms except AR9280
+ */
+ if (!pattern_enable)
+ set = AR_WOW_KEEP_ALIVE_NEVER;
+ else
+ set = KAL_TIMEOUT * 32;
+
+ REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set);
+
+ /*
+ * Keep alive delay in us. based on 'power on clock',
+ * therefore in usec
+ */
+ set = KAL_DELAY * 1000;
+ REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set);
+
+ /*
+ * Create keep alive pattern to respond to beacons
+ */
+ ath9k_wow_create_keep_alive_pattern(ah);
+
+ /*
+ * Configure MAC WoW Registers
+ */
+ set = 0;
+ /* Send keep alive timeouts anyway */
+ clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;
+
+ if (pattern_enable & AH_WOW_LINK_CHANGE)
+ wow_event_mask |= AR_WOW_KEEP_ALIVE_FAIL;
+ else
+ set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
+
+ set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
+ REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);
+
+ /*
+ * we are relying on a bmiss failure. ensure we have
+ * enough threshold to prevent false positives
+ */
+ REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR,
+ AR_WOW_BMISSTHRESHOLD);
+
+ set = 0;
+ clr = 0;
+
+ if (pattern_enable & AH_WOW_BEACON_MISS) {
+ set = AR_WOW_BEACON_FAIL_EN;
+ wow_event_mask |= AR_WOW_BEACON_FAIL;
+ } else {
+ clr = AR_WOW_BEACON_FAIL_EN;
+ }
+
+ REG_RMW(ah, AR_WOW_BCN_EN, set, clr);
+
+ set = 0;
+ clr = 0;
+ /*
+ * Enable the magic packet registers
+ */
+ if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) {
+ set = AR_WOW_MAGIC_EN;
+ wow_event_mask |= AR_WOW_MAGIC_PAT_FOUND;
+ } else {
+ clr = AR_WOW_MAGIC_EN;
+ }
+ set |= AR_WOW_MAC_INTR_EN;
+ REG_RMW(ah, AR_WOW_PATTERN, set, clr);
+
+ REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
+ AR_WOW_PATTERN_SUPPORTED);
+
+ /*
+ * Set the power states appropriately and enable PME
+ */
+ clr = 0;
+ set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN |
+ AR_PMCTRL_PWR_PM_CTRL_ENA;
+
+ clr = AR_PCIE_PM_CTRL_ENA;
+ REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);
+
+ /*
+ * this is needed to prevent the chip waking up
+ * the host within 3-4 seconds with certain
+ * platform/BIOS. The fix is to enable
+ * D1 & D3 to match original definition and
+ * also match the OTP value. Anyway this
+ * is more related to SW WOW.
+ */
+ clr = AR_PMCTRL_PWR_STATE_D1D3;
+ REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+
+ set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
+ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
+
+ REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
+
+ /* to bring down WOW power low margin */
+ set = BIT(13);
+ REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
+ /* HW WoW */
+ clr = BIT(5);
+ REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
+
+ ath9k_hw_set_powermode_wow_sleep(ah);
+ ah->wow_event_mask = wow_event_mask;
+}
+EXPORT_SYMBOL(ath9k_hw_wow_enable);
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/tx99.c
@@ -0,0 +1,263 @@
+/*
+ * Copyright (c) 2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+
+static void ath9k_tx99_stop(struct ath_softc *sc)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ ath_drain_all_txq(sc);
+ ath_startrecv(sc);
+
+ ath9k_hw_set_interrupts(ah);
+ ath9k_hw_enable_interrupts(ah);
+
+ ieee80211_wake_queues(sc->hw);
+
+ kfree_skb(sc->tx99_skb);
+ sc->tx99_skb = NULL;
+ sc->tx99_state = false;
+
+ ath9k_hw_tx99_stop(sc->sc_ah);
+ ath_dbg(common, XMIT, "TX99 stopped\n");
+}
+
+static struct sk_buff *ath9k_build_tx99_skb(struct ath_softc *sc)
+{
+ static u8 PN9Data[] = {0xff, 0x87, 0xb8, 0x59, 0xb7, 0xa1, 0xcc, 0x24,
+ 0x57, 0x5e, 0x4b, 0x9c, 0x0e, 0xe9, 0xea, 0x50,
+ 0x2a, 0xbe, 0xb4, 0x1b, 0xb6, 0xb0, 0x5d, 0xf1,
+ 0xe6, 0x9a, 0xe3, 0x45, 0xfd, 0x2c, 0x53, 0x18,
+ 0x0c, 0xca, 0xc9, 0xfb, 0x49, 0x37, 0xe5, 0xa8,
+ 0x51, 0x3b, 0x2f, 0x61, 0xaa, 0x72, 0x18, 0x84,
+ 0x02, 0x23, 0x23, 0xab, 0x63, 0x89, 0x51, 0xb3,
+ 0xe7, 0x8b, 0x72, 0x90, 0x4c, 0xe8, 0xfb, 0xc0};
+ u32 len = 1200;
+ struct ieee80211_hw *hw = sc->hw;
+ struct ieee80211_hdr *hdr;
+ struct ieee80211_tx_info *tx_info;
+ struct sk_buff *skb;
+
+ skb = alloc_skb(len, GFP_KERNEL);
+ if (!skb)
+ return NULL;
+
+ skb_put(skb, len);
+
+ memset(skb->data, 0, len);
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+ hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA);
+ hdr->duration_id = 0;
+
+ memcpy(hdr->addr1, hw->wiphy->perm_addr, ETH_ALEN);
+ memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
+ memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
+
+ hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
+
+ tx_info = IEEE80211_SKB_CB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
+ tx_info->band = hw->conf.chandef.chan->band;
+ tx_info->flags = IEEE80211_TX_CTL_NO_ACK;
+ tx_info->control.vif = sc->tx99_vif;
+
+ memcpy(skb->data + sizeof(*hdr), PN9Data, sizeof(PN9Data));
+
+ return skb;
+}
+
+static void ath9k_tx99_deinit(struct ath_softc *sc)
+{
+ ath_reset(sc);
+
+ ath9k_ps_wakeup(sc);
+ ath9k_tx99_stop(sc);
+ ath9k_ps_restore(sc);
+}
+
+static int ath9k_tx99_init(struct ath_softc *sc)
+{
+ struct ieee80211_hw *hw = sc->hw;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath_tx_control txctl;
+ int r;
+
+ if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
+ ath_err(common,
+ "driver is in invalid state unable to use TX99");
+ return -EINVAL;
+ }
+
+ sc->tx99_skb = ath9k_build_tx99_skb(sc);
+ if (!sc->tx99_skb)
+ return -ENOMEM;
+
+ memset(&txctl, 0, sizeof(txctl));
+ txctl.txq = sc->tx.txq_map[IEEE80211_AC_VO];
+
+ ath_reset(sc);
+
+ ath9k_ps_wakeup(sc);
+
+ ath9k_hw_disable_interrupts(ah);
+ atomic_set(&ah->intr_ref_cnt, -1);
+ ath_drain_all_txq(sc);
+ ath_stoprecv(sc);
+
+ sc->tx99_state = true;
+
+ ieee80211_stop_queues(hw);
+
+ if (sc->tx99_power == MAX_RATE_POWER + 1)
+ sc->tx99_power = MAX_RATE_POWER;
+
+ ath9k_hw_tx99_set_txpower(ah, sc->tx99_power);
+ r = ath9k_tx99_send(sc, sc->tx99_skb, &txctl);
+ if (r) {
+ ath_dbg(common, XMIT, "Failed to xmit TX99 skb\n");
+ return r;
+ }
+
+ ath_dbg(common, XMIT, "TX99 xmit started using %d ( %ddBm)\n",
+ sc->tx99_power,
+ sc->tx99_power / 2);
+
+ /* We leave the harware awake as it will be chugging on */
+
+ return 0;
+}
+
+static ssize_t read_file_tx99(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ char buf[3];
+ unsigned int len;
+
+ len = sprintf(buf, "%d\n", sc->tx99_state);
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_tx99(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ char buf[32];
+ bool start;
+ ssize_t len;
+ int r;
+
+ if (sc->nvifs > 1)
+ return -EOPNOTSUPP;
+
+ len = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, len))
+ return -EFAULT;
+
+ if (strtobool(buf, &start))
+ return -EINVAL;
+
+ if (start == sc->tx99_state) {
+ if (!start)
+ return count;
+ ath_dbg(common, XMIT, "Resetting TX99\n");
+ ath9k_tx99_deinit(sc);
+ }
+
+ if (!start) {
+ ath9k_tx99_deinit(sc);
+ return count;
+ }
+
+ r = ath9k_tx99_init(sc);
+ if (r)
+ return r;
+
+ return count;
+}
+
+static const struct file_operations fops_tx99 = {
+ .read = read_file_tx99,
+ .write = write_file_tx99,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t read_file_tx99_power(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ char buf[32];
+ unsigned int len;
+
+ len = sprintf(buf, "%d (%d dBm)\n",
+ sc->tx99_power,
+ sc->tx99_power / 2);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_tx99_power(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ int r;
+ u8 tx_power;
+
+ r = kstrtou8_from_user(user_buf, count, 0, &tx_power);
+ if (r)
+ return r;
+
+ if (tx_power > MAX_RATE_POWER)
+ return -EINVAL;
+
+ sc->tx99_power = tx_power;
+
+ ath9k_ps_wakeup(sc);
+ ath9k_hw_tx99_set_txpower(sc->sc_ah, sc->tx99_power);
+ ath9k_ps_restore(sc);
+
+ return count;
+}
+
+static const struct file_operations fops_tx99_power = {
+ .read = read_file_tx99_power,
+ .write = write_file_tx99_power,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+void ath9k_tx99_init_debug(struct ath_softc *sc)
+{
+ if (!AR_SREV_9300_20_OR_LATER(sc->sc_ah))
+ return;
+
+ debugfs_create_file("tx99", S_IRUSR | S_IWUSR,
+ sc->debug.debugfs_phy, sc,
+ &fops_tx99);
+ debugfs_create_file("tx99_power", S_IRUSR | S_IWUSR,
+ sc->debug.debugfs_phy, sc,
+ &fops_tx99_power);
+}
--- a/drivers/net/wireless/ath/ath9k/dfs_debug.c
+++ b/drivers/net/wireless/ath/ath9k/dfs_debug.c
@@ -44,14 +44,20 @@ static ssize_t read_file_dfs(struct file
if (buf == NULL)
return -ENOMEM;
- if (sc->dfs_detector)
- dfs_pool_stats = sc->dfs_detector->get_stats(sc->dfs_detector);
-
len += scnprintf(buf + len, size - len, "DFS support for "
"macVersion = 0x%x, macRev = 0x%x: %s\n",
hw_ver->macVersion, hw_ver->macRev,
(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_DFS) ?
"enabled" : "disabled");
+
+ if (!sc->dfs_detector) {
+ len += scnprintf(buf + len, size - len,
+ "DFS detector not enabled\n");
+ goto exit;
+ }
+
+ dfs_pool_stats = sc->dfs_detector->get_stats(sc->dfs_detector);
+
len += scnprintf(buf + len, size - len, "Pulse detector statistics:\n");
ATH9K_DFS_STAT("pulse events reported ", pulses_total);
ATH9K_DFS_STAT("invalid pulse events ", pulses_no_dfs);
@@ -76,6 +82,7 @@ static ssize_t read_file_dfs(struct file
ATH9K_DFS_POOL_STAT("Seqs. alloc error ", pseq_alloc_error);
ATH9K_DFS_POOL_STAT("Seqs. in use ", pseq_used);
+exit:
if (len > size)
len = size;