mirror of https://github.com/hak5/openwrt.git
96 lines
3.0 KiB
Diff
96 lines
3.0 KiB
Diff
--- a/arch/mips/ath79/mach-ubnt-xm.c
|
|
+++ b/arch/mips/ath79/mach-ubnt-xm.c
|
|
@@ -332,3 +332,78 @@ static void __init ubnt_uap_pro_setup(vo
|
|
MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
|
|
ubnt_uap_pro_setup);
|
|
|
|
+#define UBNT_XW_GPIO_LED_L1 11
|
|
+#define UBNT_XW_GPIO_LED_L2 16
|
|
+#define UBNT_XW_GPIO_LED_L3 13
|
|
+#define UBNT_XW_GPIO_LED_L4 14
|
|
+
|
|
+static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
|
|
+ {
|
|
+ .name = "ubnt:red:link1",
|
|
+ .gpio = UBNT_XW_GPIO_LED_L1,
|
|
+ .active_low = 1,
|
|
+ }, {
|
|
+ .name = "ubnt:orange:link2",
|
|
+ .gpio = UBNT_XW_GPIO_LED_L2,
|
|
+ .active_low = 1,
|
|
+ }, {
|
|
+ .name = "ubnt:green:link3",
|
|
+ .gpio = UBNT_XW_GPIO_LED_L3,
|
|
+ .active_low = 1,
|
|
+ }, {
|
|
+ .name = "ubnt:green:link4",
|
|
+ .gpio = UBNT_XW_GPIO_LED_L4,
|
|
+ .active_low = 1,
|
|
+ },
|
|
+};
|
|
+
|
|
+static void __init ubnt_xw_init(void)
|
|
+{
|
|
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
+
|
|
+ ath79_register_m25p80(NULL);
|
|
+
|
|
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
|
|
+ ubnt_xw_leds_gpio);
|
|
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
|
|
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
|
|
+ ubnt_xm_gpio_keys);
|
|
+
|
|
+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
|
|
+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
|
|
+
|
|
+
|
|
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
|
|
+ ath79_init_mac(ath79_eth0_data.mac_addr,
|
|
+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
|
|
+
|
|
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
+}
|
|
+
|
|
+static void __init ubnt_nano_m_xw_setup(void)
|
|
+{
|
|
+ ubnt_xw_init();
|
|
+
|
|
+ /* GMAC0 is connected to an AR8326 switch */
|
|
+ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
|
|
+ ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
|
|
+ ath79_eth0_data.speed = SPEED_100;
|
|
+ ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
+ ath79_register_eth(0);
|
|
+}
|
|
+
|
|
+static void __init ubnt_loco_m_xw_setup(void)
|
|
+{
|
|
+ ubnt_xw_init();
|
|
+
|
|
+ ath79_register_mdio(0, ~BIT(1));
|
|
+ ath79_eth0_data.phy_mask = BIT(1);
|
|
+ ath79_register_eth(0);
|
|
+}
|
|
+
|
|
+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
|
|
+ ubnt_nano_m_xw_setup);
|
|
+
|
|
+MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
|
|
+ ubnt_loco_m_xw_setup);
|
|
--- a/arch/mips/ath79/machtypes.h
|
|
+++ b/arch/mips/ath79/machtypes.h
|
|
@@ -121,9 +121,11 @@ enum ath79_mach_type {
|
|
ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
|
|
ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
|
|
ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
|
|
+ ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */
|
|
ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
|
|
ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
|
|
ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
|
|
+ ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */
|
|
ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
|
|
ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
|
|
ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
|