mirror of https://github.com/hak5/openwrt.git
241 lines
6.9 KiB
Diff
241 lines
6.9 KiB
Diff
From b00b5eafa7e8d059bd0ce844e66f648916953270 Mon Sep 17 00:00:00 2001
|
|
From: John Crispin <blogic@openwrt.org>
|
|
Date: Sun, 3 Jan 2016 19:11:22 +0100
|
|
Subject: [PATCH 2/3] phy: ralink-usb: add driver for Mediatek/Ralink
|
|
|
|
Add a driver to setup the USB phy on Mediatek/Ralink SoCs.
|
|
The driver is trivial and only sets up power and host mode.
|
|
|
|
Signed-off-by: John Crispin <blogic@openwrt.org>
|
|
---
|
|
.../devicetree/bindings/phy/ralink-usb-phy.txt | 17 ++
|
|
drivers/phy/Kconfig | 8 +
|
|
drivers/phy/Makefile | 1 +
|
|
drivers/phy/phy-ralink-usb.c | 171 ++++++++++++++++++++
|
|
4 files changed, 197 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
|
|
create mode 100644 drivers/phy/phy-ralink-usb.c
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
|
|
@@ -0,0 +1,17 @@
|
|
+Mediatek/Ralink USB PHY
|
|
+
|
|
+Required properties:
|
|
+ - compatible: ralink,rt3352-usbphy or mediatek,mt7620-usbphy
|
|
+ - #phy-cells: should be 0
|
|
+ - resets: the two reset controllers for host and device
|
|
+ - reset-names: the names of the 2 reset controllers
|
|
+
|
|
+Example:
|
|
+
|
|
+usbphy: phy {
|
|
+ compatible = "mediatek,mt7620-usbphy";
|
|
+ #phy-cells = <0>;
|
|
+
|
|
+ resets = <&rstctrl 22 &rstctrl 25>;
|
|
+ reset-names = "host", "device";
|
|
+};
|
|
--- a/drivers/phy/Kconfig
|
|
+++ b/drivers/phy/Kconfig
|
|
@@ -331,6 +331,14 @@ config PHY_XGENE
|
|
help
|
|
This option enables support for APM X-Gene SoC multi-purpose PHY.
|
|
|
|
+config PHY_RALINK_USB
|
|
+ tristate "Ralink USB PHY driver"
|
|
+ select GENERIC_PHY
|
|
+ depends on RALINK
|
|
+ help
|
|
+ This option enables support for the Ralink USB PHY found inside
|
|
+ RT3352 and MT7620.
|
|
+
|
|
config PHY_STIH407_USB
|
|
tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
|
|
depends on RESET_CONTROLLER
|
|
--- a/drivers/phy/Makefile
|
|
+++ b/drivers/phy/Makefile
|
|
@@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-
|
|
obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
|
|
obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
|
|
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
|
|
+obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o
|
|
--- /dev/null
|
|
+++ b/drivers/phy/phy-ralink-usb.c
|
|
@@ -0,0 +1,175 @@
|
|
+/*
|
|
+ * Allwinner ralink USB phy driver
|
|
+ *
|
|
+ * Copyright (C) 2016 John Crispin <blogic@openwrt.org>
|
|
+ *
|
|
+ * Based on code from
|
|
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ */
|
|
+
|
|
+#include <linux/delay.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/mutex.h>
|
|
+#include <linux/phy/phy.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/reset.h>
|
|
+#include <linux/of_platform.h>
|
|
+
|
|
+#include <asm/mach-ralink/ralink_regs.h>
|
|
+
|
|
+#define RT_SYSC_REG_SYSCFG1 0x014
|
|
+#define RT_SYSC_REG_CLKCFG1 0x030
|
|
+#define RT_SYSC_REG_USB_PHY_CFG 0x05c
|
|
+
|
|
+#define RT_RSTCTRL_UDEV BIT(25)
|
|
+#define RT_RSTCTRL_UHST BIT(22)
|
|
+#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
|
|
+
|
|
+#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
|
|
+#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22)
|
|
+#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
|
|
+#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
|
|
+
|
|
+#define USB_PHY_UTMI_8B60M BIT(1)
|
|
+#define UDEV_WAKEUP BIT(0)
|
|
+
|
|
+struct ralink_usb_phy {
|
|
+ struct reset_control *rstdev;
|
|
+ struct reset_control *rsthost;
|
|
+ u32 clk;
|
|
+ struct phy *phy;
|
|
+};
|
|
+
|
|
+static int ralink_usb_phy_power_on(struct phy *_phy)
|
|
+{
|
|
+ struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
|
|
+ u32 t;
|
|
+
|
|
+ /* enable the phy */
|
|
+ rt_sysc_m32(0, phy->clk, RT_SYSC_REG_CLKCFG1);
|
|
+
|
|
+ /* setup host mode */
|
|
+ rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
|
|
+
|
|
+ /* deassert the reset lines */
|
|
+ reset_control_deassert(phy->rsthost);
|
|
+ reset_control_deassert(phy->rstdev);
|
|
+
|
|
+ /*
|
|
+ * The SDK kernel had a delay of 100ms. however on device
|
|
+ * testing showed that 10ms is enough
|
|
+ */
|
|
+ mdelay(10);
|
|
+
|
|
+ /* print some status info */
|
|
+ t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
|
|
+ dev_info(&phy->phy->dev, "remote usb device wakeup %s\n",
|
|
+ (t & UDEV_WAKEUP) ? ("enabled") : ("disabled"));
|
|
+ if (t & USB_PHY_UTMI_8B60M)
|
|
+ dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n");
|
|
+ else
|
|
+ dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n");
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ralink_usb_phy_power_off(struct phy *_phy)
|
|
+{
|
|
+ struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
|
|
+
|
|
+ /* disable the phy */
|
|
+ rt_sysc_m32(phy->clk, 0, RT_SYSC_REG_CLKCFG1);
|
|
+
|
|
+ /* assert the reset lines */
|
|
+ reset_control_assert(phy->rstdev);
|
|
+ reset_control_assert(phy->rsthost);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct phy_ops ralink_usb_phy_ops = {
|
|
+ .power_on = ralink_usb_phy_power_on,
|
|
+ .power_off = ralink_usb_phy_power_off,
|
|
+ .owner = THIS_MODULE,
|
|
+};
|
|
+
|
|
+static const struct of_device_id ralink_usb_phy_of_match[] = {
|
|
+ {
|
|
+ .compatible = "ralink,rt3352-usbphy",
|
|
+ .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN |
|
|
+ RT_CLKCFG1_UPHY0_CLK_EN)
|
|
+ },
|
|
+ {
|
|
+ .compatible = "mediatek,mt7620-usbphy",
|
|
+ .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN |
|
|
+ MT7620_CLKCFG1_UPHY0_CLK_EN) },
|
|
+ { },
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match);
|
|
+
|
|
+static int ralink_usb_phy_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct device *dev = &pdev->dev;
|
|
+ struct phy_provider *phy_provider;
|
|
+ const struct of_device_id *match;
|
|
+ struct ralink_usb_phy *phy;
|
|
+
|
|
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
|
+ if (!phy)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ match = of_match_device(ralink_usb_phy_of_match, &pdev->dev);
|
|
+ if (!match)
|
|
+ return -ENODEV;
|
|
+
|
|
+ phy->clk = (int) match->data;
|
|
+
|
|
+ phy->rsthost = devm_reset_control_get(&pdev->dev, "host");
|
|
+ if (IS_ERR(phy->rsthost)) {
|
|
+ dev_err(dev, "host reset is missing\n");
|
|
+ return PTR_ERR(phy->rsthost);
|
|
+ }
|
|
+
|
|
+ phy->rstdev = devm_reset_control_get(&pdev->dev, "device");
|
|
+ if (IS_ERR(phy->rstdev)) {
|
|
+ dev_err(dev, "device reset is missing\n");
|
|
+ return PTR_ERR(phy->rstdev);
|
|
+ }
|
|
+
|
|
+ phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
|
|
+ if (IS_ERR(phy->phy)) {
|
|
+ dev_err(dev, "failed to create PHY\n");
|
|
+ return PTR_ERR(phy->phy);
|
|
+ }
|
|
+ phy_set_drvdata(phy->phy, phy);
|
|
+
|
|
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
+
|
|
+ return PTR_ERR_OR_ZERO(phy_provider);
|
|
+}
|
|
+
|
|
+static struct platform_driver ralink_usb_phy_driver = {
|
|
+ .probe = ralink_usb_phy_probe,
|
|
+ .driver = {
|
|
+ .of_match_table = ralink_usb_phy_of_match,
|
|
+ .name = "ralink-usb-phy",
|
|
+ }
|
|
+};
|
|
+module_platform_driver(ralink_usb_phy_driver);
|
|
+
|
|
+MODULE_DESCRIPTION("Ralink USB phy driver");
|
|
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
|
|
+MODULE_LICENSE("GPL v2");
|