This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
 
 
 
 
 
 
Go to file
Steven Barth 4894800bdd odhcp6c: handle NoAddrsAvail IA-status
SVN-Revision: 38092
2013-09-21 10:54:13 +00:00
docs docs: update remaining references to functions.sh 2012-12-20 15:29:33 +00:00
include include: add AutoProbe support 2013-09-17 21:45:05 +00:00
package odhcp6c: handle NoAddrsAvail IA-status 2013-09-21 10:54:13 +00:00
scripts scripts/feeds: ensure that --ff is enabled 2013-09-02 18:25:10 +00:00
target ar71xx: set proper wan mac during initial configuration on dir-825-c1 2013-09-20 16:59:44 +00:00
toolchain toolchain/gcc: upgrade linaro gcc 4.6 to 4.6-2013.05 2013-09-11 14:29:44 +00:00
tools firmware-utils/mktplinkfw: add support for the TL-MR13U board 2013-09-19 17:52:44 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore
BSDmakefile
Config.in build: enable MIPS16 again, but make it depend on !gcc-4.6 2013-09-10 14:40:06 +00:00
LICENSE
Makefile build: it is no longer necessary to call make target/linux/clean as part of make clean 2012-12-02 15:26:28 +00:00
README build: BSD compile fixes 2013-03-07 17:32:29 +00:00
feeds.conf.default feeds.conf.default: switch packages feed to git (#13818) 2013-07-05 02:04:40 +00:00
rules.mk build: decouple the mips16 support flag from the toolchain 2013-08-14 13:02:29 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org