mirror of https://github.com/hak5/openwrt.git
468 lines
14 KiB
Diff
468 lines
14 KiB
Diff
Port of the SPI-GPIO driver from 2.6.29-rc4.
|
|
|
|
--mb
|
|
|
|
|
|
|
|
--- /dev/null
|
|
+++ b/drivers/spi/spi_gpio.c
|
|
@@ -0,0 +1,360 @@
|
|
+/*
|
|
+ * spi_gpio.c - SPI master driver using generic bitbanged GPIO
|
|
+ *
|
|
+ * Copyright (C) 2006,2008 David Brownell
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
+ */
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/gpio.h>
|
|
+
|
|
+#include <linux/spi/spi.h>
|
|
+#include <linux/spi/spi_bitbang.h>
|
|
+#include <linux/spi/spi_gpio.h>
|
|
+
|
|
+
|
|
+/*
|
|
+ * This bitbanging SPI master driver should help make systems usable
|
|
+ * when a native hardware SPI engine is not available, perhaps because
|
|
+ * its driver isn't yet working or because the I/O pins it requires
|
|
+ * are used for other purposes.
|
|
+ *
|
|
+ * platform_device->driver_data ... points to spi_gpio
|
|
+ *
|
|
+ * spi->controller_state ... reserved for bitbang framework code
|
|
+ * spi->controller_data ... holds chipselect GPIO
|
|
+ *
|
|
+ * spi->master->dev.driver_data ... points to spi_gpio->bitbang
|
|
+ */
|
|
+
|
|
+struct spi_gpio {
|
|
+ struct spi_bitbang bitbang;
|
|
+ struct spi_gpio_platform_data pdata;
|
|
+ struct platform_device *pdev;
|
|
+};
|
|
+
|
|
+/*----------------------------------------------------------------------*/
|
|
+
|
|
+/*
|
|
+ * Because the overhead of going through four GPIO procedure calls
|
|
+ * per transferred bit can make performance a problem, this code
|
|
+ * is set up so that you can use it in either of two ways:
|
|
+ *
|
|
+ * - The slow generic way: set up platform_data to hold the GPIO
|
|
+ * numbers used for MISO/MOSI/SCK, and issue procedure calls for
|
|
+ * each of them. This driver can handle several such busses.
|
|
+ *
|
|
+ * - The quicker inlined way: only helps with platform GPIO code
|
|
+ * that inlines operations for constant GPIOs. This can give
|
|
+ * you tight (fast!) inner loops, but each such bus needs a
|
|
+ * new driver. You'll define a new C file, with Makefile and
|
|
+ * Kconfig support; the C code can be a total of six lines:
|
|
+ *
|
|
+ * #define DRIVER_NAME "myboard_spi2"
|
|
+ * #define SPI_MISO_GPIO 119
|
|
+ * #define SPI_MOSI_GPIO 120
|
|
+ * #define SPI_SCK_GPIO 121
|
|
+ * #define SPI_N_CHIPSEL 4
|
|
+ * #include "spi_gpio.c"
|
|
+ */
|
|
+
|
|
+#ifndef DRIVER_NAME
|
|
+#define DRIVER_NAME "spi_gpio"
|
|
+
|
|
+#define GENERIC_BITBANG /* vs tight inlines */
|
|
+
|
|
+/* all functions referencing these symbols must define pdata */
|
|
+#define SPI_MISO_GPIO ((pdata)->miso)
|
|
+#define SPI_MOSI_GPIO ((pdata)->mosi)
|
|
+#define SPI_SCK_GPIO ((pdata)->sck)
|
|
+
|
|
+#define SPI_N_CHIPSEL ((pdata)->num_chipselect)
|
|
+
|
|
+#endif
|
|
+
|
|
+/*----------------------------------------------------------------------*/
|
|
+
|
|
+static inline const struct spi_gpio_platform_data * __pure
|
|
+spi_to_pdata(const struct spi_device *spi)
|
|
+{
|
|
+ const struct spi_bitbang *bang;
|
|
+ const struct spi_gpio *spi_gpio;
|
|
+
|
|
+ bang = spi_master_get_devdata(spi->master);
|
|
+ spi_gpio = container_of(bang, struct spi_gpio, bitbang);
|
|
+ return &spi_gpio->pdata;
|
|
+}
|
|
+
|
|
+/* this is #defined to avoid unused-variable warnings when inlining */
|
|
+#define pdata spi_to_pdata(spi)
|
|
+
|
|
+static inline void setsck(const struct spi_device *spi, int is_on)
|
|
+{
|
|
+ gpio_set_value(SPI_SCK_GPIO, is_on);
|
|
+}
|
|
+
|
|
+static inline void setmosi(const struct spi_device *spi, int is_on)
|
|
+{
|
|
+ gpio_set_value(SPI_MOSI_GPIO, is_on);
|
|
+}
|
|
+
|
|
+static inline int getmiso(const struct spi_device *spi)
|
|
+{
|
|
+ return gpio_get_value(SPI_MISO_GPIO);
|
|
+}
|
|
+
|
|
+#undef pdata
|
|
+
|
|
+/*
|
|
+ * NOTE: this clocks "as fast as we can". It "should" be a function of the
|
|
+ * requested device clock. Software overhead means we usually have trouble
|
|
+ * reaching even one Mbit/sec (except when we can inline bitops), so for now
|
|
+ * we'll just assume we never need additional per-bit slowdowns.
|
|
+ */
|
|
+#define spidelay(nsecs) do {} while (0)
|
|
+
|
|
+#define EXPAND_BITBANG_TXRX
|
|
+#include <linux/spi/spi_bitbang.h>
|
|
+
|
|
+/*
|
|
+ * These functions can leverage inline expansion of GPIO calls to shrink
|
|
+ * costs for a txrx bit, often by factors of around ten (by instruction
|
|
+ * count). That is particularly visible for larger word sizes, but helps
|
|
+ * even with default 8-bit words.
|
|
+ *
|
|
+ * REVISIT overheads calling these functions for each word also have
|
|
+ * significant performance costs. Having txrx_bufs() calls that inline
|
|
+ * the txrx_word() logic would help performance, e.g. on larger blocks
|
|
+ * used with flash storage or MMC/SD. There should also be ways to make
|
|
+ * GCC be less stupid about reloading registers inside the I/O loops,
|
|
+ * even without inlined GPIO calls; __attribute__((hot)) on GCC 4.3?
|
|
+ */
|
|
+
|
|
+static u32 spi_gpio_txrx_word_mode0(struct spi_device *spi,
|
|
+ unsigned nsecs, u32 word, u8 bits)
|
|
+{
|
|
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
|
|
+}
|
|
+
|
|
+static u32 spi_gpio_txrx_word_mode1(struct spi_device *spi,
|
|
+ unsigned nsecs, u32 word, u8 bits)
|
|
+{
|
|
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
|
|
+}
|
|
+
|
|
+static u32 spi_gpio_txrx_word_mode2(struct spi_device *spi,
|
|
+ unsigned nsecs, u32 word, u8 bits)
|
|
+{
|
|
+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
|
|
+}
|
|
+
|
|
+static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi,
|
|
+ unsigned nsecs, u32 word, u8 bits)
|
|
+{
|
|
+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
|
|
+}
|
|
+
|
|
+/*----------------------------------------------------------------------*/
|
|
+
|
|
+static void spi_gpio_chipselect(struct spi_device *spi, int is_active)
|
|
+{
|
|
+ unsigned long cs = (unsigned long) spi->controller_data;
|
|
+
|
|
+ /* set initial clock polarity */
|
|
+ if (is_active)
|
|
+ setsck(spi, spi->mode & SPI_CPOL);
|
|
+
|
|
+ /* SPI is normally active-low */
|
|
+ gpio_set_value(cs, (spi->mode & SPI_CS_HIGH) ? is_active : !is_active);
|
|
+}
|
|
+
|
|
+static int spi_gpio_setup(struct spi_device *spi)
|
|
+{
|
|
+ unsigned long cs = (unsigned long) spi->controller_data;
|
|
+ int status = 0;
|
|
+
|
|
+ if (spi->bits_per_word > 32)
|
|
+ return -EINVAL;
|
|
+
|
|
+ if (!spi->controller_state) {
|
|
+ status = gpio_request(cs, spi->dev.bus_id);
|
|
+ if (status)
|
|
+ return status;
|
|
+ status = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
|
|
+ }
|
|
+ if (!status)
|
|
+ status = spi_bitbang_setup(spi);
|
|
+ if (status) {
|
|
+ if (!spi->controller_state)
|
|
+ gpio_free(cs);
|
|
+ }
|
|
+ return status;
|
|
+}
|
|
+
|
|
+static void spi_gpio_cleanup(struct spi_device *spi)
|
|
+{
|
|
+ unsigned long cs = (unsigned long) spi->controller_data;
|
|
+
|
|
+ gpio_free(cs);
|
|
+ spi_bitbang_cleanup(spi);
|
|
+}
|
|
+
|
|
+static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
|
|
+{
|
|
+ int value;
|
|
+
|
|
+ value = gpio_request(pin, label);
|
|
+ if (value == 0) {
|
|
+ if (is_in)
|
|
+ value = gpio_direction_input(pin);
|
|
+ else
|
|
+ value = gpio_direction_output(pin, 0);
|
|
+ }
|
|
+ return value;
|
|
+}
|
|
+
|
|
+static int __init
|
|
+spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label)
|
|
+{
|
|
+ int value;
|
|
+
|
|
+ /* NOTE: SPI_*_GPIO symbols may reference "pdata" */
|
|
+
|
|
+ value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false);
|
|
+ if (value)
|
|
+ goto done;
|
|
+
|
|
+ value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
|
|
+ if (value)
|
|
+ goto free_mosi;
|
|
+
|
|
+ value = spi_gpio_alloc(SPI_SCK_GPIO, label, false);
|
|
+ if (value)
|
|
+ goto free_miso;
|
|
+
|
|
+ goto done;
|
|
+
|
|
+free_miso:
|
|
+ gpio_free(SPI_MISO_GPIO);
|
|
+free_mosi:
|
|
+ gpio_free(SPI_MOSI_GPIO);
|
|
+done:
|
|
+ return value;
|
|
+}
|
|
+
|
|
+static int __init spi_gpio_probe(struct platform_device *pdev)
|
|
+{
|
|
+ int status;
|
|
+ struct spi_master *master;
|
|
+ struct spi_gpio *spi_gpio;
|
|
+ struct spi_gpio_platform_data *pdata;
|
|
+
|
|
+ pdata = pdev->dev.platform_data;
|
|
+#ifdef GENERIC_BITBANG
|
|
+ if (!pdata || !pdata->num_chipselect)
|
|
+ return -ENODEV;
|
|
+#endif
|
|
+
|
|
+ status = spi_gpio_request(pdata, dev_name(&pdev->dev));
|
|
+ if (status < 0)
|
|
+ return status;
|
|
+
|
|
+ master = spi_alloc_master(&pdev->dev, sizeof *spi_gpio);
|
|
+ if (!master) {
|
|
+ status = -ENOMEM;
|
|
+ goto gpio_free;
|
|
+ }
|
|
+ spi_gpio = spi_master_get_devdata(master);
|
|
+ platform_set_drvdata(pdev, spi_gpio);
|
|
+
|
|
+ spi_gpio->pdev = pdev;
|
|
+ if (pdata)
|
|
+ spi_gpio->pdata = *pdata;
|
|
+
|
|
+ master->bus_num = pdev->id;
|
|
+ master->num_chipselect = SPI_N_CHIPSEL;
|
|
+ master->setup = spi_gpio_setup;
|
|
+ master->cleanup = spi_gpio_cleanup;
|
|
+
|
|
+ spi_gpio->bitbang.master = spi_master_get(master);
|
|
+ spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
|
|
+ spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
|
|
+ spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
|
|
+ spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
|
|
+ spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
|
|
+ spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
|
|
+ spi_gpio->bitbang.flags = SPI_CS_HIGH;
|
|
+
|
|
+ status = spi_bitbang_start(&spi_gpio->bitbang);
|
|
+ if (status < 0) {
|
|
+ spi_master_put(spi_gpio->bitbang.master);
|
|
+gpio_free:
|
|
+ gpio_free(SPI_MISO_GPIO);
|
|
+ gpio_free(SPI_MOSI_GPIO);
|
|
+ gpio_free(SPI_SCK_GPIO);
|
|
+ spi_master_put(master);
|
|
+ }
|
|
+
|
|
+ return status;
|
|
+}
|
|
+
|
|
+static int __exit spi_gpio_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct spi_gpio *spi_gpio;
|
|
+ struct spi_gpio_platform_data *pdata;
|
|
+ int status;
|
|
+
|
|
+ spi_gpio = platform_get_drvdata(pdev);
|
|
+ pdata = pdev->dev.platform_data;
|
|
+
|
|
+ /* stop() unregisters child devices too */
|
|
+ status = spi_bitbang_stop(&spi_gpio->bitbang);
|
|
+ spi_master_put(spi_gpio->bitbang.master);
|
|
+
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+
|
|
+ gpio_free(SPI_MISO_GPIO);
|
|
+ gpio_free(SPI_MOSI_GPIO);
|
|
+ gpio_free(SPI_SCK_GPIO);
|
|
+
|
|
+ return status;
|
|
+}
|
|
+
|
|
+MODULE_ALIAS("platform:" DRIVER_NAME);
|
|
+
|
|
+static struct platform_driver spi_gpio_driver = {
|
|
+ .driver.name = DRIVER_NAME,
|
|
+ .driver.owner = THIS_MODULE,
|
|
+ .remove = __exit_p(spi_gpio_remove),
|
|
+};
|
|
+
|
|
+static int __init spi_gpio_init(void)
|
|
+{
|
|
+ return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe);
|
|
+}
|
|
+module_init(spi_gpio_init);
|
|
+
|
|
+static void __exit spi_gpio_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&spi_gpio_driver);
|
|
+}
|
|
+module_exit(spi_gpio_exit);
|
|
+
|
|
+
|
|
+MODULE_DESCRIPTION("SPI master driver using generic bitbanged GPIO ");
|
|
+MODULE_AUTHOR("David Brownell");
|
|
+MODULE_LICENSE("GPL");
|
|
--- /dev/null
|
|
+++ b/include/linux/spi/spi_gpio.h
|
|
@@ -0,0 +1,60 @@
|
|
+#ifndef __LINUX_SPI_GPIO_H
|
|
+#define __LINUX_SPI_GPIO_H
|
|
+
|
|
+/*
|
|
+ * For each bitbanged SPI bus, set up a platform_device node with:
|
|
+ * - name "spi_gpio"
|
|
+ * - id the same as the SPI bus number it implements
|
|
+ * - dev.platform data pointing to a struct spi_gpio_platform_data
|
|
+ *
|
|
+ * Or, see the driver code for information about speedups that are
|
|
+ * possible on platforms that support inlined access for GPIOs (no
|
|
+ * spi_gpio_platform_data is used).
|
|
+ *
|
|
+ * Use spi_board_info with these busses in the usual way, being sure
|
|
+ * that the controller_data being the GPIO used for each device's
|
|
+ * chipselect:
|
|
+ *
|
|
+ * static struct spi_board_info ... [] = {
|
|
+ * ...
|
|
+ * // this slave uses GPIO 42 for its chipselect
|
|
+ * .controller_data = (void *) 42,
|
|
+ * ...
|
|
+ * // this one uses GPIO 86 for its chipselect
|
|
+ * .controller_data = (void *) 86,
|
|
+ * ...
|
|
+ * };
|
|
+ *
|
|
+ * If the bitbanged bus is later switched to a "native" controller,
|
|
+ * that platform_device and controller_data should be removed.
|
|
+ */
|
|
+
|
|
+/**
|
|
+ * struct spi_gpio_platform_data - parameter for bitbanged SPI master
|
|
+ * @sck: number of the GPIO used for clock output
|
|
+ * @mosi: number of the GPIO used for Master Output, Slave In (MOSI) data
|
|
+ * @miso: number of the GPIO used for Master Input, Slave Output (MISO) data
|
|
+ * @num_chipselect: how many slaves to allow
|
|
+ *
|
|
+ * All GPIO signals used with the SPI bus managed through this driver
|
|
+ * (chipselects, MOSI, MISO, SCK) must be configured as GPIOs, instead
|
|
+ * of some alternate function.
|
|
+ *
|
|
+ * It can be convenient to use this driver with pins that have alternate
|
|
+ * functions associated with a "native" SPI controller if a driver for that
|
|
+ * controller is not available, or is missing important functionality.
|
|
+ *
|
|
+ * On platforms which can do so, configure MISO with a weak pullup unless
|
|
+ * there's an external pullup on that signal. That saves power by avoiding
|
|
+ * floating signals. (A weak pulldown would save power too, but many
|
|
+ * drivers expect to see all-ones data as the no slave "response".)
|
|
+ */
|
|
+struct spi_gpio_platform_data {
|
|
+ unsigned sck;
|
|
+ unsigned mosi;
|
|
+ unsigned miso;
|
|
+
|
|
+ u16 num_chipselect;
|
|
+};
|
|
+
|
|
+#endif /* __LINUX_SPI_GPIO_H */
|
|
--- a/drivers/spi/Kconfig
|
|
+++ b/drivers/spi/Kconfig
|
|
@@ -100,6 +100,22 @@ config SPI_BUTTERFLY
|
|
inexpensive battery powered microcontroller evaluation board.
|
|
This same cable can be used to flash new firmware.
|
|
|
|
+config SPI_GPIO
|
|
+ tristate "GPIO-based bitbanging SPI Master"
|
|
+ depends on GENERIC_GPIO
|
|
+ select SPI_BITBANG
|
|
+ help
|
|
+ This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
|
|
+ interface to manage MOSI, MISO, SCK, and chipselect signals. SPI
|
|
+ slaves connected to a bus using this driver are configured as usual,
|
|
+ except that the spi_board_info.controller_data holds the GPIO number
|
|
+ for the chipselect used by this controller driver.
|
|
+
|
|
+ Note that this driver often won't achieve even 1 Mbit/sec speeds,
|
|
+ making it unusually slow for SPI. If your platform can inline
|
|
+ GPIO operations, you should be able to leverage that for better
|
|
+ speed with a custom version of this driver; see the source code.
|
|
+
|
|
config SPI_IMX
|
|
tristate "Freescale iMX SPI controller"
|
|
depends on ARCH_IMX && EXPERIMENTAL
|
|
--- a/drivers/spi/Makefile
|
|
+++ b/drivers/spi/Makefile
|
|
@@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.
|
|
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
|
|
obj-$(CONFIG_SPI_AU1550) += au1550_spi.o
|
|
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
|
|
+obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
|
|
obj-$(CONFIG_SPI_IMX) += spi_imx.o
|
|
obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
|
|
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
|