openwrt/target/linux/brcm2708/patches-3.14/0035-BCM2708-Extend-mach-he...

48 lines
2.2 KiB
Diff

From 824d59b5066dff20761ecedebd4fbce27f301c70 Mon Sep 17 00:00:00 2001
From: Florian Meier <florian.meier@koalo.de>
Date: Fri, 22 Nov 2013 14:37:51 +0100
Subject: [PATCH 35/54] BCM2708: Extend mach header
Extend the headers of the mach-bcm2708
in order to support I2S and DMA engine.
Signed-off-by: Florian Meier <florian.meier@koalo.de>
---
arch/arm/mach-bcm2708/include/mach/dma.h | 2 ++
arch/arm/mach-bcm2708/include/mach/platform.h | 2 ++
2 files changed, 4 insertions(+)
diff --git a/arch/arm/mach-bcm2708/include/mach/dma.h b/arch/arm/mach-bcm2708/include/mach/dma.h
index 6d2f9a0..a4aac4c 100644
--- a/arch/arm/mach-bcm2708/include/mach/dma.h
+++ b/arch/arm/mach-bcm2708/include/mach/dma.h
@@ -45,6 +45,8 @@
#define BCM2708_DMA_ADDR 0x04
/* the current control block appears in the following registers - read only */
#define BCM2708_DMA_INFO 0x08
+#define BCM2708_DMA_SOURCE_AD 0x0c
+#define BCM2708_DMA_DEST_AD 0x10
#define BCM2708_DMA_NEXTCB 0x1C
#define BCM2708_DMA_DEBUG 0x20
diff --git a/arch/arm/mach-bcm2708/include/mach/platform.h b/arch/arm/mach-bcm2708/include/mach/platform.h
index 992a630..2e7e1bb 100644
--- a/arch/arm/mach-bcm2708/include/mach/platform.h
+++ b/arch/arm/mach-bcm2708/include/mach/platform.h
@@ -62,10 +62,12 @@
#define DMA_BASE (BCM2708_PERI_BASE + 0x7000) /* DMA controller */
#define ARM_BASE (BCM2708_PERI_BASE + 0xB000) /* BCM2708 ARM control block */
#define PM_BASE (BCM2708_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */
+#define PCM_CLOCK_BASE (BCM2708_PERI_BASE + 0x101098) /* PCM Clock */
#define RNG_BASE (BCM2708_PERI_BASE + 0x104000) /* Hardware RNG */
#define GPIO_BASE (BCM2708_PERI_BASE + 0x200000) /* GPIO */
#define UART0_BASE (BCM2708_PERI_BASE + 0x201000) /* Uart 0 */
#define MMCI0_BASE (BCM2708_PERI_BASE + 0x202000) /* MMC interface */
+#define I2S_BASE (BCM2708_PERI_BASE + 0x203000) /* I2S */
#define SPI0_BASE (BCM2708_PERI_BASE + 0x204000) /* SPI0 */
#define BSC0_BASE (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */
#define UART1_BASE (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */
--
1.9.1