This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
 
 
 
 
 
 
Go to file
Florian Fainelli 4602719db3 Fix a typo with latest driver, module name changed (#1370)
SVN-Revision: 6320
2007-02-19 09:46:25 +00:00
docs add documentation fixes from #1285 2007-02-18 16:46:46 +00:00
include make kernel_menuconfig work without target toolchain 2007-02-16 17:28:22 +00:00
package Fix a typo with latest driver, module name changed (#1370) 2007-02-19 09:46:25 +00:00
scripts Menuconfig will not treat 'select FOO' as a real dependency thus if BAR depends on FOO and FOO depends on other config options, these dependencies will not be checked. To fix this, we simply emit all of FOO's depends (only real dependencies, no select) for BAR as well. 2007-02-12 23:50:40 +00:00
target Finally fix the pesky x86-2.6 block2mtd related crash (#1058) When erasing blocks, block2mtd checks the block on the physical disk to see if everything's filled with 0xff. When grabbing a page from the page cache, it initializes the limit as <start address> + PAGE_SIZE. Turns out that the pointer to the status page is (unsigned long *), and thus it adds (PAGE_SIZE * 4). This would never have been caught, if it wasn't for the unlikely event that block2mtd catches the *last* page available in the system ram and thus tries to scan 4 memory pages from there. The absolutely trivial fix is to do a double cast (cast to (u8 *), add PAGE_SIZE, then cast to (unsigned long *)) 2007-02-18 13:52:14 +00:00
toolchain Fix ipv4/ipv6 resolving. When not using AF_INET, gethostbyname2_r tries to resolve an ipv6 address from /etc/hosts using __get_hosts_byname_r, but with AF_INET instead of the supplied address family. This returns ipv4 addresses marked as ipv6 ones. 2007-01-27 15:13:06 +00:00
tools Remove getline definition for OSX since we ship a getline implementation 2007-01-05 15:29:21 +00:00
BSDmakefile finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Config.in Add initial version of the new Image Builder It's still a bit rough in a few places, but it seems to work for Broadcom at least - other targets untested. 2007-01-10 21:52:28 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile make kernel_menuconfig work without target toolchain 2007-02-16 17:28:22 +00:00
README Update the README to something more realistic 2007-01-05 15:30:25 +00:00
rules.mk more fixes for rstrip.sh and kernel modules - fixes #1301 2007-02-09 16:24:34 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
to build the documentation. Type make -C docs/ to build the documentation.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org