openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Lars-Peter Clausen 41ddcd79ab Adds leds and gpio keys support for Iomega iConnect. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> SVN-Revision: 23682		2010-10-27 21:22:07 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	add support for darcs repositories	2010-10-24 12:36:44 +00:00
package	libtool: Force nonparallel build.	2010-10-27 19:39:09 +00:00
scripts	add support for darcs-based feeds	2010-10-24 12:36:51 +00:00
target	Adds leds and gpio keys support for Iomega iConnect.	2010-10-27 21:22:07 +00:00
toolchain	gcc 4.4.5 support	2010-10-04 12:21:58 +00:00
tools	tools/mtd-utils: add two upstream patches	2010-10-15 07:52:37 +00:00
.gitignore	.gitignore: Undo accidental commit.	2010-05-10 17:59:05 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	as we only support 2.6, remove the useless bool for it	2010-10-05 14:19:00 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	Add lxde feed to feeds.conf.default	2010-08-12 19:03:44 +00:00
rules.mk	Add HOST_FPIC. It currently always is -fPIC, because that should work on all platforms, even if it may generate slightly inefficient code on some arches.	2010-10-23 20:30:43 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org