openwrt/target/linux/ramips/dts/mt7620a_mt7610e_eval.dts

100 lines
1.6 KiB
Plaintext

/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
model = "Ralink MT7620A evaluation board";
memory@0 {
reg = <0x0 0x2000000>;
};
chosen {
bootargs = "console=ttyS0,57600";
};
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
ralink,gpiomux = "i2c", "jtag";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "en25q64";
reg = <0 0>;
linux,modalias = "m25p80", "en25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
ethernet@10100000 {
status = "okay";
};
gsw@10110000 {
status = "okay";
ralink,port4 = "ephy";
};
sdhci@10130000 {
status = "okay";
};
pcie@10140000 {
status = "okay";
};
gpio-keys-polled {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "wps";
gpios = <&gpio0 12 1>;
linux,code = <0x100>;
};
reset {
label = "reset";
gpios = <&gpio0 13 1>;
linux,code = <0x101>;
};
};
};