mirror of https://github.com/hak5/openwrt.git
134 lines
3.9 KiB
Diff
134 lines
3.9 KiB
Diff
--- a/drivers/usb/host/ehci-hcd.c
|
|
+++ b/drivers/usb/host/ehci-hcd.c
|
|
@@ -352,11 +352,13 @@ static void ehci_silence_controller(stru
|
|
ehci->rh_state = EHCI_RH_HALTED;
|
|
ehci_turn_off_all_ports(ehci);
|
|
|
|
+#ifndef CONFIG_ARCH_GEMINI
|
|
/* make BIOS/etc use companion controller during reboot */
|
|
ehci_writel(ehci, 0, &ehci->regs->configured_flag);
|
|
|
|
/* unblock posted writes */
|
|
ehci_readl(ehci, &ehci->regs->configured_flag);
|
|
+#endif
|
|
spin_unlock_irq(&ehci->lock);
|
|
}
|
|
|
|
@@ -608,7 +610,9 @@ static int ehci_run (struct usb_hcd *hcd
|
|
// Philips, Intel, and maybe others need CMD_RUN before the
|
|
// root hub will detect new devices (why?); NEC doesn't
|
|
ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
|
|
+#ifndef CONFIG_ARCH_GEMINI
|
|
ehci->command |= CMD_RUN;
|
|
+#endif
|
|
ehci_writel(ehci, ehci->command, &ehci->regs->command);
|
|
dbg_cmd (ehci, "init", ehci->command);
|
|
|
|
@@ -628,9 +632,11 @@ static int ehci_run (struct usb_hcd *hcd
|
|
*/
|
|
down_write(&ehci_cf_port_reset_rwsem);
|
|
ehci->rh_state = EHCI_RH_RUNNING;
|
|
+#ifndef CONFIG_ARCH_GEMINI
|
|
ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
|
|
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
|
|
msleep(5);
|
|
+#endif
|
|
up_write(&ehci_cf_port_reset_rwsem);
|
|
ehci->last_periodic_enable = ktime_get_real();
|
|
|
|
@@ -768,9 +774,10 @@ static irqreturn_t ehci_irq (struct usb_
|
|
pcd_status = status;
|
|
|
|
/* resume root hub? */
|
|
+#ifndef CONFIG_ARCH_GEMINI
|
|
if (ehci->rh_state == EHCI_RH_SUSPENDED)
|
|
usb_hcd_resume_root_hub(hcd);
|
|
-
|
|
+#endif
|
|
/* get per-port change detect bits */
|
|
if (ehci->has_ppcd)
|
|
ppcd = status >> 16;
|
|
@@ -1296,6 +1303,11 @@ MODULE_LICENSE ("GPL");
|
|
#define PLATFORM_DRIVER ehci_hcd_sead3_driver
|
|
#endif
|
|
|
|
+#ifdef CONFIG_ARCH_GEMINI
|
|
+#include "ehci-fotg2.c"
|
|
+#define PLATFORM_DRIVER ehci_fotg2_driver
|
|
+#endif
|
|
+
|
|
static int __init ehci_hcd_init(void)
|
|
{
|
|
int retval = 0;
|
|
--- a/drivers/usb/host/ehci-timer.c
|
|
+++ b/drivers/usb/host/ehci-timer.c
|
|
@@ -208,7 +208,9 @@ static void ehci_handle_controller_death
|
|
|
|
/* Clean up the mess */
|
|
ehci->rh_state = EHCI_RH_HALTED;
|
|
+#ifndef CONFIG_ARCH_GEMINI
|
|
ehci_writel(ehci, 0, &ehci->regs->configured_flag);
|
|
+#endif
|
|
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
|
|
ehci_work(ehci);
|
|
end_unlink_async(ehci);
|
|
--- a/drivers/usb/host/ehci.h
|
|
+++ b/drivers/usb/host/ehci.h
|
|
@@ -657,7 +657,12 @@ static inline unsigned int
|
|
ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
|
|
{
|
|
if (ehci_is_TDI(ehci)) {
|
|
- switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
|
|
+#ifdef CONFIG_ARCH_GEMINI
|
|
+ portsc = readl(ehci_to_hcd(ehci)->regs + 0x80);
|
|
+ switch ((portsc>>22)&3) {
|
|
+#else
|
|
+ switch ((portsc>>26)&3) {
|
|
+#endif
|
|
case 0:
|
|
return 0;
|
|
case 1:
|
|
--- a/drivers/usb/host/ehci-hub.c
|
|
+++ b/drivers/usb/host/ehci-hub.c
|
|
@@ -1076,6 +1076,11 @@ int ehci_hub_control(
|
|
/* see what we found out */
|
|
temp = check_reset_complete (ehci, wIndex, status_reg,
|
|
ehci_readl(ehci, status_reg));
|
|
+#ifdef CONFIG_ARCH_GEMINI
|
|
+ /* restart schedule */
|
|
+ ehci->command |= CMD_RUN;
|
|
+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
|
|
+#endif
|
|
}
|
|
|
|
/* transfer dedicated ports to the companion hc */
|
|
--- a/include/linux/usb/ehci_def.h
|
|
+++ b/include/linux/usb/ehci_def.h
|
|
@@ -112,8 +112,13 @@ struct ehci_regs {
|
|
u32 frame_list; /* points to periodic list */
|
|
/* ASYNCLISTADDR: offset 0x18 */
|
|
u32 async_next; /* address of next async queue head */
|
|
-
|
|
+#ifndef CONFIG_ARCH_GEMINI
|
|
u32 reserved1[2];
|
|
+#else
|
|
+ u32 reserved1;
|
|
+ /* PORTSC: offset 0x20 for Faraday OTG */
|
|
+ u32 port_status[1];
|
|
+#endif
|
|
|
|
/* TXFILLTUNING: offset 0x24 */
|
|
u32 txfill_tuning; /* TX FIFO Tuning register */
|
|
@@ -125,8 +130,11 @@ struct ehci_regs {
|
|
u32 configured_flag;
|
|
#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
|
|
|
|
+#ifndef CONFIG_ARCH_GEMINI
|
|
/* PORTSC: offset 0x44 */
|
|
u32 port_status[0]; /* up to N_PORTS */
|
|
+#endif
|
|
+
|
|
/* EHCI 1.1 addendum */
|
|
#define PORTSC_SUSPEND_STS_ACK 0
|
|
#define PORTSC_SUSPEND_STS_NYET 1
|