mirror of https://github.com/hak5/openwrt.git
221 lines
5.6 KiB
Diff
221 lines
5.6 KiB
Diff
--- a/arch/mips/ath79/mach-db120.c
|
|
+++ b/arch/mips/ath79/mach-db120.c
|
|
@@ -37,17 +37,26 @@
|
|
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
+#include <linux/mtd/mtd.h>
|
|
+#include <linux/mtd/partitions.h>
|
|
#include <linux/pci.h>
|
|
+#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
|
|
-#include "machtypes.h"
|
|
+#include <asm/mach-ath79/ar71xx_regs.h>
|
|
+
|
|
+#include "common.h"
|
|
+#include "dev-ap9x-pci.h"
|
|
+#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
+#include "dev-m25p80.h"
|
|
#include "dev-spi.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
-#include "pci.h"
|
|
+#include "machtypes.h"
|
|
|
|
+#define DB120_GPIO_LED_USB 11
|
|
#define DB120_GPIO_LED_WLAN_5G 12
|
|
#define DB120_GPIO_LED_WLAN_2G 13
|
|
#define DB120_GPIO_LED_STATUS 14
|
|
@@ -58,8 +67,50 @@
|
|
#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
|
|
|
|
-#define DB120_WMAC_CALDATA_OFFSET 0x1000
|
|
-#define DB120_PCIE_CALDATA_OFFSET 0x5000
|
|
+#define DB120_MAC0_OFFSET 0
|
|
+#define DB120_MAC1_OFFSET 6
|
|
+#define DB120_WMAC_CALDATA_OFFSET 0x1000
|
|
+#define DB120_PCIE_CALDATA_OFFSET 0x5000
|
|
+
|
|
+static struct mtd_partition db120_partitions[] = {
|
|
+ {
|
|
+ .name = "u-boot",
|
|
+ .offset = 0,
|
|
+ .size = 0x040000,
|
|
+ .mask_flags = MTD_WRITEABLE,
|
|
+ },
|
|
+ {
|
|
+ .name = "u-boot-env",
|
|
+ .offset = 0x040000,
|
|
+ .size = 0x010000,
|
|
+ },
|
|
+ {
|
|
+ .name = "rootfs",
|
|
+ .offset = 0x050000,
|
|
+ .size = 0x630000,
|
|
+ },
|
|
+ {
|
|
+ .name = "uImage",
|
|
+ .offset = 0x680000,
|
|
+ .size = 0x160000,
|
|
+ },
|
|
+ {
|
|
+ .name = "NVRAM",
|
|
+ .offset = 0x7E0000,
|
|
+ .size = 0x010000,
|
|
+ },
|
|
+ {
|
|
+ .name = "ART",
|
|
+ .offset = 0x7F0000,
|
|
+ .size = 0x010000,
|
|
+ .mask_flags = MTD_WRITEABLE,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct flash_platform_data db120_flash_data = {
|
|
+ .parts = db120_partitions,
|
|
+ .nr_parts = ARRAY_SIZE(db120_partitions),
|
|
+};
|
|
|
|
static struct gpio_led db120_leds_gpio[] __initdata = {
|
|
{
|
|
@@ -82,6 +133,11 @@ static struct gpio_led db120_leds_gpio[]
|
|
.gpio = DB120_GPIO_LED_WLAN_2G,
|
|
.active_low = 1,
|
|
},
|
|
+ {
|
|
+ .name = "db120:green:usb",
|
|
+ .gpio = DB120_GPIO_LED_USB,
|
|
+ .active_low = 1,
|
|
+ }
|
|
};
|
|
|
|
static struct gpio_keys_button db120_gpio_keys[] __initdata = {
|
|
@@ -95,66 +151,65 @@ static struct gpio_keys_button db120_gpi
|
|
},
|
|
};
|
|
|
|
-static struct ath79_spi_controller_data db120_spi0_data = {
|
|
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
|
|
- .cs_line = 0,
|
|
-};
|
|
-
|
|
-static struct spi_board_info db120_spi_info[] = {
|
|
- {
|
|
- .bus_num = 0,
|
|
- .chip_select = 0,
|
|
- .max_speed_hz = 25000000,
|
|
- .modalias = "s25sl064a",
|
|
- .controller_data = &db120_spi0_data,
|
|
- }
|
|
-};
|
|
-
|
|
-static struct ath79_spi_platform_data db120_spi_data = {
|
|
- .bus_num = 0,
|
|
- .num_chipselect = 1,
|
|
-};
|
|
-
|
|
-#ifdef CONFIG_PCI
|
|
-static struct ath9k_platform_data db120_ath9k_data;
|
|
-
|
|
-static int db120_pci_plat_dev_init(struct pci_dev *dev)
|
|
+static void __init db120_gmac_setup(void)
|
|
{
|
|
- switch (PCI_SLOT(dev->devfn)) {
|
|
- case 0:
|
|
- dev->dev.platform_data = &db120_ath9k_data;
|
|
- break;
|
|
- }
|
|
+ void __iomem *base;
|
|
+ u32 t;
|
|
|
|
- return 0;
|
|
-}
|
|
+ base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
|
|
|
|
-static void __init db120_pci_init(u8 *eeprom)
|
|
-{
|
|
- memcpy(db120_ath9k_data.eeprom_data, eeprom,
|
|
- sizeof(db120_ath9k_data.eeprom_data));
|
|
+ t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
|
|
+ t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
|
|
+ AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
|
|
+ __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
|
|
|
|
- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
|
|
- ath79_register_pci();
|
|
+ iounmap(base);
|
|
}
|
|
-#else
|
|
-static inline void db120_pci_init(void) {}
|
|
-#endif /* CONFIG_PCI */
|
|
|
|
static void __init db120_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
|
+ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
|
|
+ ath79_register_m25p80(&db120_flash_data);
|
|
+
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
|
|
db120_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(db120_gpio_keys),
|
|
db120_gpio_keys);
|
|
- ath79_register_spi(&db120_spi_data, db120_spi_info,
|
|
- ARRAY_SIZE(db120_spi_info));
|
|
ath79_register_usb();
|
|
ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
|
|
- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
|
|
+ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
|
|
+
|
|
+ db120_gmac_setup();
|
|
+
|
|
+ ath79_register_mdio(0, 0x0);
|
|
+ ath79_register_mdio(1, 0x0);
|
|
+
|
|
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
|
|
+#if 0
|
|
+ /* GMAC0 is connected to an AR8327 switch */
|
|
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
+ ath79_eth0_data.speed = SPEED_1000;
|
|
+ ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
+#else
|
|
+ /* GMAC0 is connected to PHY4 of the internal switch */
|
|
+ ath79_switch_data.phy4_mii_en = 1;
|
|
+
|
|
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
+ ath79_eth0_data.phy_mask = BIT(4);
|
|
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
|
+#endif
|
|
+ ath79_register_eth(0);
|
|
+
|
|
+ /* GMAC1 is connected to the internal switch */
|
|
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
|
|
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
+ ath79_eth1_data.speed = SPEED_1000;
|
|
+ ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
+
|
|
+ ath79_register_eth(1);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
|
|
--- a/arch/mips/ath79/Kconfig
|
|
+++ b/arch/mips/ath79/Kconfig
|
|
@@ -31,9 +31,11 @@ config ATH79_MACH_AP81
|
|
config ATH79_MACH_DB120
|
|
bool "Atheros DB120 reference board"
|
|
select SOC_AR934X
|
|
+ select ATH79_DEV_AP9X_PCI if PCI
|
|
+ select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
- select ATH79_DEV_SPI
|
|
+ select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
help
|