mirror of https://github.com/hak5/openwrt.git
166 lines
5.2 KiB
Diff
166 lines
5.2 KiB
Diff
From: Stas Sergeev <stsp@list.ru>
|
|
Date: Wed, 2 Dec 2015 20:35:11 +0300
|
|
Subject: [PATCH] mvneta: implement ethtool autonegotiation control
|
|
|
|
This patch allows to do
|
|
ethtool -s eth0 autoneg off
|
|
ethtool -s eth0 autoneg on
|
|
to disable or enable autonegotiation at run-time.
|
|
Without that functionality, the only way to control the autonegotiation
|
|
is to modify the device tree.
|
|
|
|
This is needed if you plan to use the same kernel with
|
|
different ethernet switches, the ones that support the in-band
|
|
status and the ones that not.
|
|
|
|
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
CC: netdev@vger.kernel.org
|
|
CC: linux-kernel@vger.kernel.org
|
|
|
|
Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
|
|
--- a/drivers/net/ethernet/marvell/mvneta.c
|
|
+++ b/drivers/net/ethernet/marvell/mvneta.c
|
|
@@ -371,7 +371,7 @@ struct mvneta_port {
|
|
unsigned int duplex;
|
|
unsigned int speed;
|
|
unsigned int tx_csum_limit;
|
|
- int use_inband_status:1;
|
|
+ unsigned int use_inband_status:1;
|
|
|
|
u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
|
|
};
|
|
@@ -973,6 +973,44 @@ static void mvneta_set_other_mcast_table
|
|
mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
|
|
}
|
|
|
|
+static void mvneta_set_autoneg(struct mvneta_port *pp, int enable)
|
|
+{
|
|
+ u32 val;
|
|
+
|
|
+ if (enable) {
|
|
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
|
|
+ val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
|
|
+ MVNETA_GMAC_FORCE_LINK_DOWN |
|
|
+ MVNETA_GMAC_AN_FLOW_CTRL_EN);
|
|
+ val |= MVNETA_GMAC_INBAND_AN_ENABLE |
|
|
+ MVNETA_GMAC_AN_SPEED_EN |
|
|
+ MVNETA_GMAC_AN_DUPLEX_EN;
|
|
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
|
|
+
|
|
+ val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
|
|
+ val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
|
|
+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
|
|
+
|
|
+ val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
|
|
+ val |= MVNETA_GMAC2_INBAND_AN_ENABLE;
|
|
+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
|
|
+ } else {
|
|
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
|
|
+ val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
|
|
+ MVNETA_GMAC_AN_SPEED_EN |
|
|
+ MVNETA_GMAC_AN_DUPLEX_EN);
|
|
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
|
|
+
|
|
+ val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
|
|
+ val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
|
|
+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
|
|
+
|
|
+ val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
|
|
+ val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE;
|
|
+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
|
|
+ }
|
|
+}
|
|
+
|
|
/* This method sets defaults to the NETA port:
|
|
* Clears interrupt Cause and Mask registers.
|
|
* Clears all MAC tables.
|
|
@@ -1058,39 +1096,7 @@ static void mvneta_defaults_set(struct m
|
|
val &= ~MVNETA_PHY_POLLING_ENABLE;
|
|
mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
|
|
|
|
- if (pp->use_inband_status) {
|
|
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
|
|
- val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
|
|
- MVNETA_GMAC_FORCE_LINK_DOWN |
|
|
- MVNETA_GMAC_AN_FLOW_CTRL_EN);
|
|
- val |= MVNETA_GMAC_INBAND_AN_ENABLE |
|
|
- MVNETA_GMAC_AN_SPEED_EN |
|
|
- MVNETA_GMAC_AN_DUPLEX_EN;
|
|
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
|
|
-
|
|
- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
|
|
- val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
|
|
- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
|
|
-
|
|
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
|
|
- val |= MVNETA_GMAC2_INBAND_AN_ENABLE;
|
|
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
|
|
- } else {
|
|
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
|
|
- val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
|
|
- MVNETA_GMAC_AN_SPEED_EN |
|
|
- MVNETA_GMAC_AN_DUPLEX_EN);
|
|
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
|
|
-
|
|
- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
|
|
- val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
|
|
- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
|
|
-
|
|
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
|
|
- val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE;
|
|
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
|
|
- }
|
|
-
|
|
+ mvneta_set_autoneg(pp, pp->use_inband_status);
|
|
mvneta_set_ucast_table(pp, -1);
|
|
mvneta_set_special_mcast_table(pp, -1);
|
|
mvneta_set_other_mcast_table(pp, -1);
|
|
@@ -2956,10 +2962,43 @@ int mvneta_ethtool_get_settings(struct n
|
|
int mvneta_ethtool_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct mvneta_port *pp = netdev_priv(dev);
|
|
+ struct phy_device *phydev = pp->phy_dev;
|
|
|
|
- if (!pp->phy_dev)
|
|
+ if (!phydev)
|
|
return -ENODEV;
|
|
|
|
+ if ((cmd->autoneg == AUTONEG_ENABLE) != pp->use_inband_status) {
|
|
+ u32 val;
|
|
+
|
|
+ mvneta_set_autoneg(pp, cmd->autoneg == AUTONEG_ENABLE);
|
|
+
|
|
+ if (cmd->autoneg == AUTONEG_DISABLE) {
|
|
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
|
|
+ val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
|
|
+ MVNETA_GMAC_CONFIG_GMII_SPEED |
|
|
+ MVNETA_GMAC_CONFIG_FULL_DUPLEX);
|
|
+
|
|
+ if (phydev->duplex)
|
|
+ val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
|
|
+
|
|
+ if (phydev->speed == SPEED_1000)
|
|
+ val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
|
|
+ else if (phydev->speed == SPEED_100)
|
|
+ val |= MVNETA_GMAC_CONFIG_MII_SPEED;
|
|
+
|
|
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
|
|
+ }
|
|
+
|
|
+ pp->use_inband_status = (cmd->autoneg == AUTONEG_ENABLE);
|
|
+ netdev_info(pp->dev, "autoneg status set to %i\n",
|
|
+ pp->use_inband_status);
|
|
+
|
|
+ if (netif_running(dev)) {
|
|
+ mvneta_port_down(pp);
|
|
+ mvneta_port_up(pp);
|
|
+ }
|
|
+ }
|
|
+
|
|
return phy_ethtool_sset(pp->phy_dev, cmd);
|
|
}
|
|
|