openwrt/target/linux/adm5120/files/arch/mips/adm5120/irq.c

176 lines
3.9 KiB
C

/*
* $Id$
*
* ADM5120 specific interrupt handlers
*
* Copyright (C) 2007 OpenWrt.org
* Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/version.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/bitops.h>
#include <adm5120_defs.h>
#include <adm5120_irq.h>
#define INTC_WRITE(reg, val) __raw_writel((val), \
(void __iomem *)(KSEG1ADDR(ADM5120_INTC_BASE) + reg))
#define INTC_READ(reg) __raw_readl(\
(void __iomem *)(KSEG1ADDR(ADM5120_INTC_BASE) + reg))
static void adm5120_intc_irq_unmask(unsigned int irq);
static void adm5120_intc_irq_mask(unsigned int irq);
static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type);
static struct irq_chip adm5120_intc_irq_chip = {
.name = "INTC",
.unmask = adm5120_intc_irq_unmask,
.mask = adm5120_intc_irq_mask,
.mask_ack = adm5120_intc_irq_mask,
.set_type = adm5120_intc_irq_set_type
};
static struct irqaction adm5120_intc_irq_action = {
.handler = no_action,
.name = "cascade [INTC]"
};
static void adm5120_intc_irq_unmask(unsigned int irq)
{
irq -= ADM5120_INTC_IRQ_BASE;
INTC_WRITE(INTC_REG_IRQ_ENABLE, 1 << irq);
}
static void adm5120_intc_irq_mask(unsigned int irq)
{
irq -= ADM5120_INTC_IRQ_BASE;
INTC_WRITE(INTC_REG_IRQ_DISABLE, 1 << irq);
}
static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type)
{
unsigned int sense;
unsigned long mode;
int err = 0;
sense = flow_type & (IRQ_TYPE_SENSE_MASK);
switch (sense) {
case IRQ_TYPE_NONE:
case IRQ_TYPE_LEVEL_HIGH:
break;
case IRQ_TYPE_LEVEL_LOW:
switch (irq) {
case ADM5120_IRQ_GPIO2:
case ADM5120_IRQ_GPIO4:
break;
default:
err = -EINVAL;
break;
}
break;
default:
err = -EINVAL;
break;
}
if (err)
return err;
switch (irq) {
case ADM5120_IRQ_GPIO2:
case ADM5120_IRQ_GPIO4:
mode = INTC_READ(INTC_REG_INT_MODE);
if (sense == IRQ_TYPE_LEVEL_LOW)
mode |= (1 << (irq - ADM5120_INTC_IRQ_BASE));
else
mode &= ~(1 << (irq - ADM5120_INTC_IRQ_BASE));
INTC_WRITE(INTC_REG_INT_MODE, mode);
/* fallthrough */
default:
irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
irq_desc[irq].status |= sense;
break;
}
return 0;
}
static void adm5120_intc_irq_dispatch(void)
{
unsigned long status;
int irq;
/* dispatch only one IRQ at a time */
status = INTC_READ(INTC_REG_IRQ_STATUS) & INTC_INT_ALL;
if (status) {
irq = ADM5120_INTC_IRQ_BASE+fls(status)-1;
do_IRQ(irq);
} else
spurious_interrupt();
}
asmlinkage void plat_irq_dispatch(void)
{
unsigned long pending;
pending = read_c0_status() & read_c0_cause() & ST0_IM;
if (pending & STATUSF_IP7)
do_IRQ(ADM5120_IRQ_COUNTER);
else if (pending & STATUSF_IP2)
adm5120_intc_irq_dispatch();
else
spurious_interrupt();
}
#define INTC_IRQ_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED)
static void __init adm5120_intc_irq_init(int base)
{
int i;
/* disable all interrupts */
INTC_WRITE(INTC_REG_IRQ_DISABLE, INTC_INT_ALL);
/* setup all interrupts to generate IRQ instead of FIQ */
INTC_WRITE(INTC_REG_INT_MODE, 0);
/* set active level for all external interrupts to HIGH */
INTC_WRITE(INTC_REG_INT_LEVEL, 0);
/* disable usage of the TEST_SOURCE register */
INTC_WRITE(INTC_REG_IRQ_SOURCE_SELECT, 0);
for (i = ADM5120_INTC_IRQ_BASE;
i <= ADM5120_INTC_IRQ_BASE+INTC_IRQ_LAST;
i++) {
irq_desc[i].status = INTC_IRQ_STATUS;
set_irq_chip_and_handler(i, &adm5120_intc_irq_chip,
handle_level_irq);
}
setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action);
}
void __init arch_init_irq(void) {
mips_cpu_irq_init();
adm5120_intc_irq_init(ADM5120_INTC_IRQ_BASE);
}