openwrt/target/linux/rb532/patches-2.6.27/005-pata_rb532_cf_4bytes_rw...

69 lines
2.1 KiB
Diff

* rename the offset definition to avoid abiguity with the standard ATA
IO address
* read and write four bytes at once like the original driver does
* use writesl() and readsl() which implicitly iterate over the data
This patch assumes buflen to be a multiple of four, which is true for
ATA devices. ATAPI support is not known, though unlikely, as the
original driver always transfers 512 Bytes at once.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com>
---
drivers/ata/pata_rb532_cf.c | 20 +++++++++-----------
1 files changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index 7b11f40..b919012 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -43,7 +43,8 @@
#define RB500_CF_REG_BASE 0x0800
#define RB500_CF_REG_ERR 0x080D
#define RB500_CF_REG_CTRL 0x080E
-#define RB500_CF_REG_DATA 0x0C00
+/* 32bit buffered data register offset */
+#define RB500_CF_REG_DBUF32 0x0C00
struct rb532_cf_info {
void __iomem *iobase;
@@ -74,19 +75,16 @@ static void rb532_pata_exec_command(struct ata_port *ap,
rb532_pata_finish_io(ap);
}
-static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+static void rb532_pata_data_xfer(struct ata_device *adev,
+ unsigned char *buf, unsigned int buflen, int write_data)
{
struct ata_port *ap = adev->link->ap;
void __iomem *ioaddr = ap->ioaddr.data_addr;
- if (write_data) {
- for (; buflen > 0; buflen--, buf++)
- writeb(*buf, ioaddr);
- } else {
- for (; buflen > 0; buflen--, buf++)
- *buf = readb(ioaddr);
- }
+ if (write_data)
+ writesl(ioaddr, buf, buflen / sizeof(u32));
+ else
+ readsl(ioaddr, buf, buflen / sizeof(u32));
rb532_pata_finish_io(adev->link->ap);
}
@@ -156,7 +154,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
ata_sff_std_ports(&ap->ioaddr);
- ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
+ ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32;
ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR;
}
--
1.5.6.4