openwrt/target/linux/generic-2.6/patches-2.6.26/640-mvswitch.patch

49 lines
1.4 KiB
Diff

--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -70,6 +70,12 @@ config ADM6996_PHY
---help---
Currently supports the ADM6996F switch
+config MVSWITCH_PHY
+ tristate "Driver for Marvell switches"
+ select VLAN_8021Q
+ ---help---
+ Currently supports the Marvell 88E6060 switch.
+
config FIXED_PHY
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_VITESSE_PHY) += vitesse.o
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_ADM6996_PHY) += adm6996.o
+obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -35,6 +35,12 @@
#include <asm/irq.h>
#include <asm/uaccess.h>
+static void mdio_dev_release(struct device *dev)
+{
+ /* nothing to do */
+}
+
+
/**
* mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
* @bus: target mii_bus
@@ -85,6 +91,7 @@ int mdiobus_register(struct mii_bus *bus
phydev->dev.parent = bus->dev;
phydev->dev.bus = &mdio_bus_type;
+ phydev->dev.release = mdio_dev_release;
snprintf(phydev->dev.bus_id, BUS_ID_SIZE, PHY_ID_FMT, bus->id, i);
phydev->bus = bus;