openwrt/target/linux/brcm63xx/image/Makefile

108 lines
3.3 KiB
Makefile

#
# Copyright (C) 2006 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
LOADADDR = 0x80010000 # RAM start + 16M
KERNEL_ENTRY = $(LOADADDR) # Newer kernels add a jmp to the kernel_entry at the start of the binary
RAMSIZE = 0x01000000 # 64MB
LOADER_MAKEOPTS= \
KDIR=$(KDIR) \
LOADADDR=$(LOADADDR) \
KERNEL_ENTRY=$(KERNEL_ENTRY) \
RAMSIZE=$(RAMSIZE)
define trxalign/jffs2-128k
-a 0x20000
endef
define trxalign/jffs2-64k
-a 0x10000
endef
define trxalign/squashfs
-a 1024
endef
define Image/Build/CFE
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
-o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin \
-b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR)
# -b $(2) -c $(3) -e $(KERNEL_ENTRY) -l $(LOADADDR)
$(call prepare_generic_squashfs,$(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin)
endef
define Image/Build/RedBoot
cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
$(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
endef
define Image/Build/CFEOLD
$(TOPDIR)/scripts/brcmImage.pl -t -p \
-b $(2) -c $(3) \
-k $(KDIR)/vmlinux.lzma.cfe \
-r $(KDIR)/root.$(1) \
-o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
endef
define Build/Clean
$(MAKE) -C lzma-loader clean
endef
define Image/Prepare
# Standard LZMA kernel
cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
# CFE is a LZMA nazi! It took me hours to find out the parameters!
# Also I think lzma has a bug cause it generates different output depending on
# if you use stdin / stdout or not. Use files instead of stdio here, cause
# otherwise CFE will complain and not boot the image.
$(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
# Strip out the length, CFE doesn't like this
dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
rm -f $(KDIR)/vmlinux.lzma.tmp
# Build the LZMA loader
rm -f $(KDIR)/loader.gz
$(MAKE) -C lzma-loader \
BUILD_DIR="$(KDIR)" \
TARGET="$(KDIR)" \
clean install
echo -ne "\\x00" >> $(KDIR)/loader.gz
rm -f $(KDIR)/fs_mark
touch $(KDIR)/fs_mark
$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
endef
define Image/Build
$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1)
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) bs=128k conv=sync
$(call Image/Build/CFE,$(1),96345GW2,6345)
$(call Image/Build/CFE,$(1),96348GW,6348)
# Neufbox4
$(call Image/Build/CFE,$(1),96358VW,6358)
# Comtrend 536
$(call Image/Build/CFE,$(1),96348GW-11,6348)
# Davolink DV201AMR
$(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
# DG834GT
$(call Image/Build/CFE,$(1),96348GW-10,6348)
# Sagem F@ST2404
$(call Image/Build/CFE,$(1),F@ST2404,6348)
# Inventel Livebox
$(call Image/Build/RedBoot,livebox)
endef
$(eval $(call BuildImage))