openwrt/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi

112 lines
1.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
compatible = "ubnt,xw", "qca,ar9342";
model = "Ubiquiti Networks XW board";
gpio-leds {
compatible = "gpio-leds";
link1 {
label = "ubnt:red:link1";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
link2 {
label = "ubnt:orange:link2";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
link3 {
label = "ubnt:green:link3";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
link4 {
label = "ubnt:green:link4";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x050000 0x760000>;
};
partition@fb0000 {
label = "cfg";
reg = <0x7b0000 0x040000>;
read-only;
};
eeprom: partition@ff0000 {
label = "EEPROM";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
mtd-cal-data = <&eeprom 0x1000>;
mtd-mac-address = <&eeprom 0x1002>;
};