openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

John Crispin 34e5998921 * fixes dwc_otg init when power gpio is set to -1 SVN-Revision: 25521		2011-02-13 16:01:07 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	it's time for some attitude adjustment ;)	2011-02-13 11:20:09 +00:00
package	make all wext wifi drivers select DRIVER_WEXT_SUPPORT, so that hostapd/wpa_supplicant can make it optional	2011-02-13 14:18:13 +00:00
scripts	metadata: fix handling of multiple build dependencies with different conditions	2011-02-13 02:52:22 +00:00
target	* fixes dwc_otg init when power gpio is set to -1	2011-02-13 16:01:07 +00:00
toolchain	uclibc: disable COMPAT_ATEXIT	2011-02-13 14:18:08 +00:00
tools	brcm47xx: fix error when build firmware on x86_64 host (closes #7672 )	2011-02-12 13:17:47 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	prepare support for libiconv, libintl stub/full switching	2011-02-02 01:26:19 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	add a variable LIBRPC to refer to the external librpc if used	2011-02-13 01:45:07 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org