mirror of https://github.com/hak5/openwrt.git
51fe956c4f
Buffalo WXR-2533DHP is a 2.4/5 GHz band 11ac router, based on Qualcomm IPQ8064. The U-Boot on WXR-2533DHP employs a complicated dual firmware protection scheme against corruptions of the kernel and rootfs images. See the notes in buffalo.sh for details. specifications: - Qualcomm IPQ8064 (384 - 1,400 MHz, 2C2T) - 512 MB of RAM (DDR3) - 256 MB of Flash (NAND) - 4T4R 2.4/5 GHz Wlan (QCA9980) - 5x 10/100/1000 Mbps Ethernet - 10x LEDs, 8x keys (6x buttons, 2x slide-switches) - 2x USB 3.0 Type-A - 12VDC/4A AC Adapter - UART through-hole on PCB - J3: Vcc, GND, TX, RX from USB port side - 115200n8 Boot instructions for the initramfs image: 1. Prepare the TFTP server with the initramfs image renamed to "wxr2300dhp-initramfs.uImage" and IP address "192.168.11.10". 2. Press the "AOSS" button while powering on the WXR-2533DHP. 3. Wait until the "Wireless" LED flashes before releasing the AOSS button. The WXR-2533DHP will grab the image from TFTP server and will boot it. Flashing instructions: To persistently write the firmware, flash an openwrt sysupgrade image from inside the initramfs, for example transfer via `scp <sysupgrade> root@192.168.1.1:/tmp` and flash on the device with `sysupgrade -n /tmp/<sysupgrade>`. Then wait ~120 seconds to let it finish the flashing process. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded message] |
||
|---|---|---|
| .. | ||
| 0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch | ||
| 0002-dmaengine-Add-ADM-driver.patch | ||
| 0030-clk-Disable-i2c-device-on-gsbi4.patch | ||
| 0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch | ||
| 0032-phy-add-qcom-dwc3-phy.patch | ||
| 0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch | ||
| 0034-ARM-Add-Krait-L2-register-accessor-functions.patch | ||
| 0035-clk-mux-Split-out-register-accessors-for-reuse.patch | ||
| 0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch | ||
| 0039-clk-qcom-Add-HFPLL-driver.patch | ||
| 0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch | ||
| 0041-clk-qcom-Add-support-for-Krait-clocks.patch | ||
| 0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch | ||
| 0043-clk-qcom-Add-Krait-clock-controller-driver.patch | ||
| 0044-clk-Add-safe-switch-hook.patch | ||
| 0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch | ||
| 0046-cpufreq-qcom-independent-core-clocks.patch | ||
| 0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch | ||
| 0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch | ||
| 0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch | ||
| 0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch | ||
| 0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch | ||
| 0053-regulator-add-smb208-support.patch | ||
| 0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch | ||
| 0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch | ||
| 0056-cpufreq-dt-Add-missing-rcu-locks.patch | ||
| 0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch | ||
| 0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch | ||
| 0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch | ||
| 0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch | ||
| 0063-1-ipq806x-tsens-driver.patch | ||
| 0063-2-tsens-support-configurable-interrupts.patch | ||
| 0064-clk-clk-rpm-fixes.patch | ||
| 0065-arm-override-compiler-flags.patch | ||
| 0067-generic-Mangle-bootloader-s-kernel-arguments.patch | ||
| 0069-arm-boot-add-dts-files.patch | ||
| 0070-qcom-spm-fix-probe-order.patch | ||
| 0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch | ||
| 0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch | ||
| 0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch | ||
| 0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch | ||
| 0071-6-PCI-qcom-Force-GEN1-support.patch | ||
| 0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch | ||
| 0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch | ||
| 0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch | ||
| 0072-add-ipq806x-with-no-clocks.patch | ||
| 0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch | ||
| 0074-ipq806x-usb-Control-USB-master-reset.patch | ||
| 0075-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch | ||
| 105-mtd-nor-add-mx25l25635f.patch | ||
| 310-msm-adhoc-bus-support.patch | ||
| 850-soc-add-qualcomm-syscon.patch | ||