openwrt/target/linux/brcm63xx/patches-3.18/532-board_AR-5381u.patch

81 lines
2.0 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -143,6 +143,61 @@ static struct board_info __initdata boar
},
};
+static struct sprom_fixup __initdata ar5381u_fixups[] = {
+ { .offset = 97, .value = 0xfee5 },
+ { .offset = 98, .value = 0x157c },
+ { .offset = 99, .value = 0xfae7 },
+ { .offset = 113, .value = 0xfefa },
+ { .offset = 114, .value = 0x15d6 },
+ { .offset = 115, .value = 0xfaf8 },
+};
+
+static struct board_info __initdata board_AR5381u = {
+ .name = "96328A-1241N",
+ .expected_cpu_id = 0x6328,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM43225,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ .board_fixups = ar5381u_fixups,
+ .num_board_fixups = ARRAY_SIZE(ar5381u_fixups),
+ },
+};
+
static struct sprom_fixup __initdata ar5387un_fixups[] = {
{ .offset = 2, .value = 0x05bb },
{ .offset = 65, .value = 0x1204 },
@@ -1596,6 +1651,7 @@ static const struct board_info __initcon
#endif
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,
+ &board_AR5381u,
&board_AR5387un,
&board_963281TAN,
&board_A4001N1,
@@ -1667,6 +1723,7 @@ static struct of_device_id const bcm963x
{ .compatible = "adb,a4001n1", .data = &board_A4001N1, },
{ .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
+ { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
{ .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
{ .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
#endif