openwrt/target/linux/ramips/dts/ALL0239-3G.dts

117 lines
1.7 KiB
Plaintext

/dts-v1/;
#include "rt3050.dtsi"
/ {
compatible = "ALL0239-3G", "ralink,rt3052-soc";
model = "Allnet ALL0239-3G";
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
gpio-leds {
compatible = "gpio-leds";
usb {
label = "all0239-3g:green:usb";
gpios = <&gpio0 8 1>;
};
3g {
label = "all0239-3g:green:3g";
gpios = <&gpio0 11 1>;
};
status {
label = "all0239-3g:green:status";
gpios = <&gpio0 12 1>;
};
wps {
label = "all0239-3g:green:wps";
gpios = <&gpio0 14 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
connect {
label = "connect";
gpios = <&gpio0 7 1>;
linux,code = <0xda>;
};
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&esw {
status = "okay";
mediatek,portmap = <0x3e>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&otg {
status = "okay";
};