openwrt/target/linux/ramips/dts
Chuanhong Guo 5563d49a39 ramips: disable sdhc for HC5661A
Currently OpenWrt doesn't support switching MT7628 into AP mode
(which is done by writing some undocumented registers in MTK SDK)
Without doing so, enabling SD breaks 4 FE ports and the SD controller
doesn't work since SD pins aren't configured correctly.

Disable SDHC on HC5661A to recover the 4 FE ports.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
[drop the sdhci node completely]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-06 12:17:25 +01:00
..
3G-6200N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
3G-6200NL.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
3G150B.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
3G300M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
11ACNAS.dts ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
A5-V11.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AC1200RM.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AI-BR100.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AIR3GII.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL0239-3G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL0256N-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL0256N-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL0256N.dtsi ramips: fix dtc warnings 2018-08-04 08:39:35 +02:00
ALL5002.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL5003.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AP-MT7621A-V60.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AR670W.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
AR725W.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ASL26555-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ASL26555-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ASL26555.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
ATP-52B.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWAPN2403.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWM002-EVB-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWM002-EVB-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWM002-EVB.dtsi ramips: fix dtc warnings 2018-08-04 08:39:35 +02:00
AWUSFREE1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC2-v1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC20i.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC20v1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC20v4.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
ArcherC50.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC50V3.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
ArcherMR200.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BC2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BDCOM-WAP2100-SK.dts ramips: bdcom-wap2100: Change DTS license to GPL-2.0-or-later OR MIT 2018-11-29 13:15:44 +01:00
BOCCO.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BR-6475ND.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BR-6478AC-V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BROADWAY.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
C108.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
CARAMBOLA.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
CF-WR800N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
CS-QR10.dts ramips: mt7620: disable PCIe if nothing is attached 2018-12-03 15:34:56 +01:00
CY-SWR1100.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
D105.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
D240.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DAP-1350.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DAP-1522-A1.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
DB-WRT01.dts ramips: mt7620: disable PCIe if nothing is attached 2018-12-03 15:34:56 +01:00
DCH-M225.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DCS-930.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DCS-930L-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-300-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-300-B7.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-320-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-600-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-610-A1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-615-D.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-615-H1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-620-A1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-620-D1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-645.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-810L.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-860L-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DUZUN-DM06.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DWR-116-A1.dts ramips: specify "firmware" partition format in JBOOT devices 2018-11-30 00:22:04 +01:00
DWR-118-A1.dts ramips: add support for D-Link DWR-118-A1 2018-12-03 15:34:56 +01:00
DWR-118-A2.dts ramips: specify "firmware" partition format in JBOOT devices 2018-11-30 00:22:04 +01:00
DWR-512-B.dts ramips: specify "firmware" partition format in JBOOT devices 2018-11-30 00:22:04 +01:00
DWR-921-C1.dts ramips: specify "firmware" partition format in JBOOT devices 2018-11-30 00:22:04 +01:00
E1700.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ESR-9753.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
EW1200.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
EX2700.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
EX3700.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
F5D8235_V1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
F5D8235_V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
F7C027.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
FIREWRT.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
FONERA20N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
FREESTATION5.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GB-PC1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GB-PC2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GL-MT300A.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GL-MT300N-V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GL-MT300N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GL-MT750.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HC5X61.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HC5661.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
HC5661A.dts ramips: disable sdhc for HC5661A 2018-12-06 12:17:25 +01:00
HC5761.dts ramips: mt7620: add missing pci wifi nodes to dts files 2018-12-03 15:34:56 +01:00
HC5861.dts ramips: mt7620: add missing pci wifi nodes to dts files 2018-12-03 15:34:56 +01:00
HC5861B.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HC5962.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
HG255D.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HLKRM04.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HPM.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HT-TM02.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HW550-3G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
IP2202.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
JHR-N805R.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
JHR-N825R.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
JHR-N926R.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
K2G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
K2P.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
LINKIT7688.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
LR-25G001.dts ramips: specify "firmware" partition format in JBOOT devices 2018-11-30 00:22:04 +01:00
M2M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M4-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M4-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M4.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
MAC1200RV2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MINIEMBPLUG.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MINIEMBWIFI.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MIR3G.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
MIWIFI-MINI.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MIWIFI-NANO.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MLW221.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MLWG2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MOFI3500-3GN.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MPRA1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MPRA2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MR-102N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MT7620a.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MT7620a_MT7530.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MT7620a_MT7610e.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MT7620a_V22SG.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MT7621.dts ramips: move partitions into partition table node 2018-08-04 08:39:35 +02:00
MT7628.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-750DHP.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-DP150N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-EX300NP.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-EX750NP.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-W300NH2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-WDPR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MicroWRT.dts ramips: mt7620: disable PCIe if nothing is attached 2018-12-03 15:34:56 +01:00
NA930.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NBG-419N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NBG-419N2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NCS601W.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NIXCORE-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NIXCORE-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NIXCORE.dtsi ramips: fix whitespace and comment issues in dts 2018-08-04 08:39:35 +02:00
NW718.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Newifi-D1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Newifi-D2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
OMEGA2.dts ramips: fix Omega2 compatible string 2017-12-29 22:32:34 +01:00
OMEGA2.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
OMEGA2P.dts ramips: fix Omega2 compatible string 2017-12-29 22:32:34 +01:00
OY-0001.dts ramips: mt7620: disable PCIe if nothing is attached 2018-12-03 15:34:56 +01:00
PBR-D1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PBR-M1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PSG1208.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PSG1218.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PSG1218A.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
PSG1218B.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
PSR-680W.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PWH2004.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PX-4885-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PX-4885-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PX-4885.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
R6120.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
R6220.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
RB750Gr3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RBM11G.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
RBM33G.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
RE350.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RE6500.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RP-N53.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-AC51U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-G32-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N10-PLUS.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N12-PLUS.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N13U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N14U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N15.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N56U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT5350F-OLINUXINO-EVB.dts ramips: introduce RT5350F-OLINUXINO.dtsi 2017-09-28 09:20:36 +02:00
RT5350F-OLINUXINO.dts ramips: introduce RT5350F-OLINUXINO.dtsi 2017-09-28 09:20:36 +02:00
RT5350F-OLINUXINO.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RUT5XX.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
SAP-G3200U3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
SK-WB8.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
SKW92A.dts ramips: improve Skylab SKW92A support 2018-11-26 15:54:22 +01:00
SL-R7205.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TEW-638APB-V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TEW-691GR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TEW-692GR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TEW-714TRU.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TINY-AC.dts ramips: mt7620: add missing pci wifi nodes to dts files 2018-12-03 15:34:56 +01:00
TL-MR3020V3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TL-MR3420V5.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WA801NDV5.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WR840NV4.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WR840NV5.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TL-WR841NV13.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WR842NV5.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WR902ACV3.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TPLINK-8M.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Timecloud.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U25AWF-H1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U35WF.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U7621-06-256M-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U7621-06-512M-64M.dts ramips: add support for UniElec U7621-06-512M-64M variant 2018-11-28 01:11:38 +01:00
U7621-06.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
U7628-01-128M-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U7628-01.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
UBNT-ER-e50.dtsi ramips: move partitions into partition table node 2018-08-04 08:39:35 +02:00
UBNT-ERX-SFP.dts ramips: add missing soc compatibles to dts 2018-01-09 22:05:46 +01:00
UBNT-ERX.dts ramips: add support for Ubiquiti EdgeRouter X-SFP 2017-06-07 06:33:33 +02:00
UR-326N4G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
UR-336UN.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
V11STFE.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
V22RW-2X2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VAR11N-300.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
VOCORE2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE2.dtsi ramips: backport MT7628 pinmux fixes 2017-11-22 08:21:52 +01:00
VOCORE2LITE.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VR500.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W06.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W150M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W306R_V20.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W502U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W2914NSV2.dts ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
W2914NSV2.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WCR-1166DS.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WCR150GN.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WD03.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WE1026-5G-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WE1026-5G.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
WF-2881.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WHR-300HP2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WHR-600D.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WHR-1166D.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WHR-G300N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIDORA-NEO-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIDORA-NEO-32M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIDORA-NEO.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WITI-256M.dts ramips: add support for mqmaker witi 512mb version 2018-05-07 18:54:23 +02:00
WITI-512M.dts ramips: add support for mqmaker witi 512mb version 2018-05-07 18:54:23 +02:00
WITI.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIZARD8800.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIZFI630A.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-330N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-330N3G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-341V3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-351.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-WN570HA1.dts ramips: add support for Wavlink WL-WN570HA1 2018-11-28 00:50:35 +01:00
WL-WN575A3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WLI-TX4-AG300N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WLR-6000.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WMDR-143N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WMR-300.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WN-AX1167GR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WN-GX300GR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WN3000RPV3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WNCE2001.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WNDR3700V5.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR512-3GN-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR512-3GN-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR512-3GN.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WR1200JS.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR1201.dts ramips: add support for MTC Wireless Router WR1201 2018-11-30 00:20:28 +01:00
WR6202.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRC-1167GHBK2-S.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRC-1900GST.dts ramips: add support for ELECOM WRC-1900GST 2018-08-23 22:42:09 +02:00
WRC-2533GST.dts ramips: add support for ELECOM WRC-1900GST 2018-08-23 22:42:09 +02:00
WRH-300CR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRTNODE.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRTNODE2.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRTNODE2P.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WRTNODE2R.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WSR-600.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WSR-1166.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WT1520-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT1520-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT1520.dtsi ramips: fix dtc warnings 2018-08-04 08:39:35 +02:00
WT3020-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT3020-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT3020.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WZR-AGL300NH.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
X5.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
X8.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
XDXRN502J.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Y1.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
Y1.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Y1S.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
YOUKU-YK1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-APE522II.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-CPE102.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WA05.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE826-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE826-32M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE826.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
ZBT-WE1226.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE1326.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE2026.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE3526.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WG2626.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WG3526-16M.dts ramips: mt7621: add compatible strings 2017-07-29 09:24:32 +02:00
ZBT-WG3526-32M.dts ramips: mt7621: add compatible strings 2017-07-29 09:24:32 +02:00
ZBT-WG3526.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WR8305RT.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZL5900V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZTE-Q7.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
elecom_wrc-gst.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ki_rb.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
kn.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
kn_rc.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
kn_rf.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
kng_rc.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
mt7620a.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
mt7620n.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
mt7621.dtsi ramips: fix some clocks in mt7621.dtsi 2018-11-26 12:13:52 +01:00
mt7628an.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
rt2880.dtsi ramips: rt2880: fix pci cells definition 2018-11-26 15:54:22 +01:00
rt3050.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
rt3352.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
rt3883.dtsi ramips: revert fix rt3883 pci pinmux 2018-11-26 15:54:22 +01:00
rt5350.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00