This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
 
 
 
 
 
 
Go to file
Jo-Philipp Wich 27da9d1984 base-files: move ipv6 module loading from setup_interface() to addif() in the hotplug call, this ensures that ipv6 is loaded before any interfaces or aliases with ip6addr option are configured (#5356)
SVN-Revision: 17217
2009-08-10 23:48:10 +00:00
docs configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) 2009-07-05 11:17:49 +00:00
include add an optional config option for stripping all unnecessary symbol exports from the kernel image 2009-08-08 14:22:04 +00:00
package base-files: move ipv6 module loading from setup_interface() to addif() in the hotplug call, this ensures that ipv6 is loaded before any interfaces or aliases with ip6addr option are configured (#5356) 2009-08-10 23:48:10 +00:00
scripts Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason. 2009-06-08 21:17:58 +00:00
target arm: when linking the kernel, move the section discards after the other sections to fix discarding unused symbol exports 2009-08-09 20:51:04 +00:00
toolchain add gcc 4.3.4 2009-08-07 12:00:25 +00:00
tools add support for the Pirelli AG226G board (#5337) 2009-08-09 10:19:47 +00:00
.gitignore add logs/ to .gitignore 2009-04-24 01:04:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add an optional config option for stripping all unnecessary symbol exports from the kernel image 2009-08-08 14:22:04 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
feeds.conf.default switch to LuCI 0.9.x branch 2009-06-10 23:55:19 +00:00
rules.mk add a staging directory for unstripped package files, useful for debugging, will be used for mklibs integration later 2009-08-07 21:58:35 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org