hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/at91-2.6/patches/001-vlink-machine.patch

192 lines
5.8 KiB
Diff
Raw Blame History

diff -Naur linux-2.6.19.1/arch/arm/boot/compressed/head-at91rm9200.S linux/arch/arm/boot/compressed/head-at91rm9200.S
--- linux-2.6.19.1/arch/arm/boot/compressed/head-at91rm9200.S 2006-12-11 20:32:53.000000000 +0100
+++ linux/arch/arm/boot/compressed/head-at91rm9200.S 2007-01-20 10:26:21.000000000 +0100
@@ -61,6 +61,12 @@
cmp r7, r3
beq 99f
+ @ FDL Versalink : 1053
+ mov r3, #(MACH_TYPE_VLINK & 0xff)
+ orr r3, r3, #(MACH_TYPE_VLINK & 0xff00)
+ cmp r7, r3
+ beq 99f
+
@ Ajeco 1ARM : 1075
mov r3, #(MACH_TYPE_ONEARM & 0xff)
orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/board-vlink.c linux/arch/arm/mach-at91rm9200/board-vlink.c
--- linux-2.6.19.1/arch/arm/mach-at91rm9200/board-vlink.c 1970-01-01 01:00:00.000000000 +0100
+++ linux/arch/arm/mach-at91rm9200/board-vlink.c 2007-01-19 21:18:00.000000000 +0100
@@ -0,0 +1,144 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-ek.c
+ *
+ * Copyright (C) 2006,2007 Hamish Guthrie
+ * Guthrie Consulting.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata vlink_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 5,
+ .tty_map = { 4, 1, 0, 3, 2 } /* ttyS0, ..., ttyS4 */
+};
+
+static void __init vlink_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+ /* Setup the LEDs */
+// at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&vlink_uart_config);
+}
+
+static void __init vlink_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct eth_platform_data __initdata vlink_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata vlink_usbh_data = {
+ .ports = 1,
+};
+
+static struct at91_udc_data __initdata vlink_udc_data = {
+ .vbus_pin = AT91_PIN_PD4,
+ .pullup_pin = AT91_PIN_PD5,
+};
+
+/*static struct at91_mmc_data __initdata ek_mmc_data = {
+ .det_pin = AT91_PIN_PB27,
+ .is_b = 0,
+ .wire4 = 1,
+ .wp_pin = AT91_PIN_PA17,
+};
+*/
+
+static struct spi_board_info vlink_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ },
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 3,
+ .max_speed_hz = 15 * 1000 * 1000,
+ },
+#endif
+};
+
+static void __init vlink_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&vlink_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&vlink_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&vlink_udc_data);
+ at91_set_multi_drive(vlink_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
+ /* I2C */
+ at91_add_device_i2c();
+ /* SPI */
+ at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices));
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ /* DataFlash card */
+// at91_set_gpio_output(AT91_PIN_PB22, 0);
+#else
+ /* MMC */
+// at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
+// at91_add_device_mmc(&vlink_mmc_data);
+#endif
+ /* VGA */
+}
+
+MACHINE_START(VLINK, "FDL VersaLink")
+ /* Maintainer: Guthrie Consulting */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = vlink_map_io,
+ .init_irq = vlink_init_irq,
+ .init_machine = vlink_board_init,
+MACHINE_END
diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/Kconfig linux/arch/arm/mach-at91rm9200/Kconfig
--- linux-2.6.19.1/arch/arm/mach-at91rm9200/Kconfig 2006-12-11 20:32:53.000000000 +0100
+++ linux/arch/arm/mach-at91rm9200/Kconfig 2007-01-19 21:17:49.000000000 +0100
@@ -82,6 +82,12 @@
help
Select this if you are using Sperry-Sun's KAFA board.
+config MACH_VLINK
+ bool "Figment Design Labs VersaLink"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using FDL's VersaLink board
+
endif
# ----------------------------------------------------------
diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/Makefile linux/arch/arm/mach-at91rm9200/Makefile
--- linux-2.6.19.1/arch/arm/mach-at91rm9200/Makefile 2006-12-11 20:32:53.000000000 +0100
+++ linux/arch/arm/mach-at91rm9200/Makefile 2007-01-19 21:17:42.000000000 +0100
@@ -24,6 +24,7 @@
obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
+obj-$(CONFIG_MACH_VLINK) += board-vlink.o
# AT91SAM9260 board-specific support
Reference in New Issue View Git Blame Copy Permalink