openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Florian Fainelli 27189b328e refresh and refine 972-cpmac_multi_probe.patch, patch from sn9 SVN-Revision: 24180		2010-11-28 18:03:56 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	update to the latest stable kernels	2010-11-24 18:50:11 +00:00
package	ath9k: fix module reload on ar713x based systems with ar92xx	2010-11-27 22:51:03 +00:00
scripts	switch from ext2 to ext4 (w/o) journaling	2010-11-22 12:12:39 +00:00
target	refresh and refine 972-cpmac_multi_probe.patch, patch from sn9	2010-11-28 18:03:56 +00:00
toolchain	uClibc: add back a few cflags that were being overwritten, might fix a few segfauls (thx, framer99)	2010-11-24 00:30:26 +00:00
tools	tools/pkg-config: update to version 0.25	2010-11-25 18:56:19 +00:00
.gitignore	.gitignore: Undo accidental commit.	2010-05-10 17:59:05 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	remove 2.6.25 support	2010-11-22 13:43:32 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	remove an obsolete comment for the flock template	2010-10-31 15:36:47 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org