openwrt/target/linux/ramips/dts/Newifi-D1.dts

147 lines
2.3 KiB
Plaintext

/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc";
model = "Newifi-D1";
memory@0 {
device_type = "memory";
reg = <0x0 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
status-red {
label = "newifi-d1:red:status";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
status-green {
label = "newifi-d1:green:status";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
statys-blue {
label = "newifi-d1:blue:status";
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb2power {
gpio-export,name = "usb2power";
gpio-export,output = <1>;
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
usb3power {
gpio-export,name = "usb3power";
gpio-export,output = <1>;
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
};
};
};
&sdhci {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sdhci_pins>;
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x2000000>;
};
};
};
&pcie {
status = "okay";
pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
pcie1 {
mt76@1,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x0000>;
};
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c";
ralink,function = "gpio";
};
};
};