mirror of https://github.com/hak5/openwrt.git
1760 lines
50 KiB
Diff
1760 lines
50 KiB
Diff
From 0b2881369a38b0a139ae4a256ea1953750fb6a76 Mon Sep 17 00:00:00 2001
|
|
From: wavelet2 <a3d35232@btinternet.com>
|
|
Date: Thu, 22 Mar 2018 19:08:02 +0000
|
|
Subject: [PATCH 260/454] Add overlay for Semtech SX150X I2C GPIO Expanders
|
|
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 19 +
|
|
arch/arm/boot/dts/overlays/sx150x-overlay.dts | 1706 +++++++++++++++++
|
|
3 files changed, 1726 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/sx150x-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -120,6 +120,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
spi2-2cs.dtbo \
|
|
spi2-3cs.dtbo \
|
|
superaudioboard.dtbo \
|
|
+ sx150x.dtbo \
|
|
tinylcd35.dtbo \
|
|
uart0.dtbo \
|
|
uart1.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1703,6 +1703,25 @@ Load: dtoverlay=superaudioboard,<param
|
|
Params: gpiopin GPIO pin for codec reset
|
|
|
|
|
|
+Name: sx150x
|
|
+Info: Configures the Semtech SX150X I2C GPIO expanders.
|
|
+Load: dtoverlay=sx150x,<param>=<val>
|
|
+Params: sx150<x>-<n>-<m> Enables SX150X device on I2C#<n> with slave
|
|
+ address <m>. <x> may be 1-9. <n> may be 0 or 1.
|
|
+ Permissible values of <m> (which is denoted in
|
|
+ hex) depend on the device variant. For SX1501,
|
|
+ SX1502, SX1504 and SX1505, <m> may be 20 or 21.
|
|
+ For SX1503 and SX1506, <m> may be 20. For
|
|
+ SX1507 and SX1509, <m> may be 3E, 3F, 70 or 71.
|
|
+ For SX1508, <m> may be 20, 21, 22 or 23.
|
|
+
|
|
+ sx150<x>-<n>-<m>-int-gpio
|
|
+ Integer, enables interrupts on SX150X device on
|
|
+ I2C#<n> with slave address <m>, specifies
|
|
+ the GPIO pin to which NINT output of SX150X is
|
|
+ connected.
|
|
+
|
|
+
|
|
Name: tinylcd35
|
|
Info: 3.5" Color TFT Display by www.tinylcd.com
|
|
Options: Touch, RTC, keypad
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/sx150x-overlay.dts
|
|
@@ -0,0 +1,1706 @@
|
|
+// Definitions for SX150x I2C GPIO Expanders from Semtech
|
|
+
|
|
+// dtparams:
|
|
+// sx150<x>-<n>-<m> - Enables SX150X device on I2C#<n> with slave address <m>. <x> may be 1-9.
|
|
+// <n> may be 0 or 1. Permissible values of <m> (which is denoted in hex)
|
|
+// depend on the device variant.
|
|
+// For SX1501, SX1502, SX1504 and SX1505, <m> may be 20 or 21.
|
|
+// For SX1503 and SX1506, <m> may be 20.
|
|
+// For SX1507 and SX1509, <m> may be 3E, 3F, 70 or 71.
|
|
+// For SX1508, <m> may be 20, 21, 22 or 23.
|
|
+// sx150<x>-<n>-<m>-int-gpio - Integer, enables interrupts on SX150X device on I2C#<n> with slave address <m>,
|
|
+// specifies the GPIO pin to which NINT output of SX150X is connected.
|
|
+//
|
|
+//
|
|
+// Example 1: A single SX1505 device on I2C#1 with its slave address set to 0x20 and NINT output connected to GPIO25:
|
|
+// dtoverlay=sx150x:sx1505-1-20,sx1505-1-20-int-gpio=25
|
|
+//
|
|
+// Example 2: Two SX1507 devices on I2C#0 with their slave addresses set to 0x3E and 0x70 (interrupts not used):
|
|
+// dtoverlay=sx150x:sx1507-0-3E,sx1507-0-70
|
|
+
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
|
|
+
|
|
+ // Enable I2C#0 interface
|
|
+ fragment@0 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable I2C#1 interface
|
|
+ fragment@1 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1501 on I2C#0 at slave addr 0x20
|
|
+ fragment@2 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1501_0_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1501q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1501-0-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1501 on I2C#1 at slave addr 0x20
|
|
+ fragment@3 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1501_1_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1501q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1501-1-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1501 on I2C#0 at slave addr 0x21
|
|
+ fragment@4 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1501_0_21: sx150x@21 {
|
|
+ compatible = "semtech,sx1501q";
|
|
+ reg = <0x21>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1501-0-21-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1501 on I2C#1 at slave addr 0x21
|
|
+ fragment@5 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1501_1_21: sx150x@21 {
|
|
+ compatible = "semtech,sx1501q";
|
|
+ reg = <0x21>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1501-1-21-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1502 on I2C#0 at slave addr 0x20
|
|
+ fragment@6 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1502_0_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1502q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1502-0-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1502 on I2C#1 at slave addr 0x20
|
|
+ fragment@7 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1502_1_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1502q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1502-1-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1502 on I2C#0 at slave addr 0x21
|
|
+ fragment@8 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1502_0_21: sx150x@21 {
|
|
+ compatible = "semtech,sx1502q";
|
|
+ reg = <0x21>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1502-0-21-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1502 on I2C#1 at slave addr 0x21
|
|
+ fragment@9 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1502_1_21: sx150x@21 {
|
|
+ compatible = "semtech,sx1502q";
|
|
+ reg = <0x21>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1501-1-21-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1503 on I2C#0 at slave addr 0x20
|
|
+ fragment@10 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1503_0_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1503q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1503-0-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1503 on I2C#1 at slave addr 0x20
|
|
+ fragment@11 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1503_1_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1503q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1503-1-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1504 on I2C#0 at slave addr 0x20
|
|
+ fragment@12 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1504_0_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1504q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1504-0-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1504 on I2C#1 at slave addr 0x20
|
|
+ fragment@13 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1504_1_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1504q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1504-1-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1504 on I2C#0 at slave addr 0x21
|
|
+ fragment@14 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1504_0_21: sx150x@21 {
|
|
+ compatible = "semtech,sx1504q";
|
|
+ reg = <0x21>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1504-0-21-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1504 on I2C#1 at slave addr 0x21
|
|
+ fragment@15 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1504_1_21: sx150x@21 {
|
|
+ compatible = "semtech,sx1504q";
|
|
+ reg = <0x21>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1504-1-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1505 on I2C#0 at slave addr 0x20
|
|
+ fragment@16 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1505_0_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1505q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1505-0-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1505 on I2C#1 at slave addr 0x20
|
|
+ fragment@17 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1505_1_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1505q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1505-1-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1505 on I2C#0 at slave addr 0x21
|
|
+ fragment@18 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1505_0_21: sx150x@21 {
|
|
+ compatible = "semtech,sx1505q";
|
|
+ reg = <0x21>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1505-0-21-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1505 on I2C#1 at slave addr 0x21
|
|
+ fragment@19 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1505_1_21: sx150x@21 {
|
|
+ compatible = "semtech,sx1505q";
|
|
+ reg = <0x21>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1505-1-21-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1506 on I2C#0 at slave addr 0x20
|
|
+ fragment@20 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1506_0_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1506q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1506-0-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1506 on I2C#1 at slave addr 0x20
|
|
+ fragment@21 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1506_1_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1506q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1506-1-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1507 on I2C#0 at slave addr 0x3E
|
|
+ fragment@22 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1507_0_3E: sx150x@3E {
|
|
+ compatible = "semtech,sx1507q";
|
|
+ reg = <0x3E>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1507_0_3E-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1507 on I2C#1 at slave addr 0x3E
|
|
+ fragment@23 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1507_1_3E: sx150x@3E {
|
|
+ compatible = "semtech,sx1507q";
|
|
+ reg = <0x3E>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1507_1_3E-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1507 on I2C#0 at slave addr 0x3F
|
|
+ fragment@24 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1507_0_3F: sx150x@3F {
|
|
+ compatible = "semtech,sx1507q";
|
|
+ reg = <0x3F>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1507_0_3F-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1507 on I2C#1 at slave addr 0x3F
|
|
+ fragment@25 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1507_1_3F: sx150x@3F {
|
|
+ compatible = "semtech,sx1507q";
|
|
+ reg = <0x3F>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1507_1_3F-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1507 on I2C#0 at slave addr 0x70
|
|
+ fragment@26 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1507_0_70: sx150x@70 {
|
|
+ compatible = "semtech,sx1507q";
|
|
+ reg = <0x70>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1507-0-70-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1507 on I2C#1 at slave addr 0x70
|
|
+ fragment@27 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1507_1_70: sx150x@70 {
|
|
+ compatible = "semtech,sx1507q";
|
|
+ reg = <0x70>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1507-1-70-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1507 on I2C#0 at slave addr 0x71
|
|
+ fragment@28 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1507_0_71: sx150x@71 {
|
|
+ compatible = "semtech,sx1507q";
|
|
+ reg = <0x71>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1507-0-71-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1507 on I2C#1 at slave addr 0x71
|
|
+ fragment@29 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1507_1_71: sx150x@71 {
|
|
+ compatible = "semtech,sx1507q";
|
|
+ reg = <0x71>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1507-1-71-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1508 on I2C#0 at slave addr 0x20
|
|
+ fragment@30 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1508_0_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1508q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1508-0-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1508 on I2C#1 at slave addr 0x20
|
|
+ fragment@31 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1508_1_20: sx150x@20 {
|
|
+ compatible = "semtech,sx1508q";
|
|
+ reg = <0x20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1508-1-20-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1508 on I2C#0 at slave addr 0x21
|
|
+ fragment@32 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1508_0_21: sx150x@21 {
|
|
+ compatible = "semtech,sx1508q";
|
|
+ reg = <0x21>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1508-0-21-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1508 on I2C#1 at slave addr 0x21
|
|
+ fragment@33 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1508_1_21: sx150x@21 {
|
|
+ compatible = "semtech,sx1508q";
|
|
+ reg = <0x21>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1508-1-21-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1508 on I2C#0 at slave addr 0x22
|
|
+ fragment@34 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1508_0_22: sx150x@22 {
|
|
+ compatible = "semtech,sx1508q";
|
|
+ reg = <0x22>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1508-0-22-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1508 on I2C#1 at slave addr 0x22
|
|
+ fragment@35 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1508_1_22: sx150x@22 {
|
|
+ compatible = "semtech,sx1508q";
|
|
+ reg = <0x22>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1508-1-22-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1508 on I2C#0 at slave addr 0x23
|
|
+ fragment@36 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1508_0_23: sx150x@23 {
|
|
+ compatible = "semtech,sx1508q";
|
|
+ reg = <0x23>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1508-0-23-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1508 on I2C#1 at slave addr 0x23
|
|
+ fragment@37 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1508_1_23: sx150x@23 {
|
|
+ compatible = "semtech,sx1508q";
|
|
+ reg = <0x23>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1508-1-23-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1509 on I2C#0 at slave addr 0x3E
|
|
+ fragment@38 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1509_0_3E: sx150x@3E {
|
|
+ compatible = "semtech,sx1509q";
|
|
+ reg = <0x3E>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1509_0_3E-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1509 on I2C#1 at slave addr 0x3E
|
|
+ fragment@39 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1509_1_3E: sx150x@3E {
|
|
+ compatible = "semtech,sx1509q";
|
|
+ reg = <0x3E>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1509_1_3E-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1509 on I2C#0 at slave addr 0x3F
|
|
+ fragment@40 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1509_0_3F: sx150x@3F {
|
|
+ compatible = "semtech,sx1509q";
|
|
+ reg = <0x3F>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1509_0_3F-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1509 on I2C#1 at slave addr 0x3F
|
|
+ fragment@41 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1509_1_3F: sx150x@3F {
|
|
+ compatible = "semtech,sx1509q";
|
|
+ reg = <0x3F>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1509_1_3F-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1509 on I2C#0 at slave addr 0x70
|
|
+ fragment@42 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1509_0_70: sx150x@70 {
|
|
+ compatible = "semtech,sx1509q";
|
|
+ reg = <0x70>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1509-0-70-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1509 on I2C#1 at slave addr 0x70
|
|
+ fragment@43 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1509_1_70: sx150x@70 {
|
|
+ compatible = "semtech,sx1509q";
|
|
+ reg = <0x70>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1509-1-70-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1509 on I2C#0 at slave addr 0x71
|
|
+ fragment@44 {
|
|
+ target = <&i2c0>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1509_0_71: sx150x@71 {
|
|
+ compatible = "semtech,sx1509q";
|
|
+ reg = <0x71>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1509-0-71-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable a SX1509 on I2C#1 at slave addr 0x71
|
|
+ fragment@45 {
|
|
+ target = <&i2c1>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sx1509_1_71: sx150x@71 {
|
|
+ compatible = "semtech,sx1509q";
|
|
+ reg = <0x71>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <25 2>; /* 1st word overwritten by sx1509-1-71-int-gpio parameter
|
|
+ 2nd word is 2 for falling-edge triggered */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1501 on I2C#0 at slave addr 0x20
|
|
+ fragment@46 {
|
|
+ target = <&sx1501_0_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1501 on I2C#1 at slave addr 0x20
|
|
+ fragment@47 {
|
|
+ target = <&sx1501_1_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1501 on I2C#0 at slave addr 0x21
|
|
+ fragment@48 {
|
|
+ target = <&sx1501_0_21>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_21_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1501 on I2C#1 at slave addr 0x21
|
|
+ fragment@49 {
|
|
+ target = <&sx1501_1_21>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_21_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1502 on I2C#0 at slave addr 0x20
|
|
+ fragment@50 {
|
|
+ target = <&sx1502_0_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1502 on I2C#1 at slave addr 0x20
|
|
+ fragment@51 {
|
|
+ target = <&sx1502_1_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1502 on I2C#0 at slave addr 0x21
|
|
+ fragment@52 {
|
|
+ target = <&sx1502_0_21>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_21_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1502 on I2C#1 at slave addr 0x21
|
|
+ fragment@53 {
|
|
+ target = <&sx1502_1_21>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_21_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1503 on I2C#0 at slave addr 0x20
|
|
+ fragment@54 {
|
|
+ target = <&sx1503_0_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1503 on I2C#1 at slave addr 0x20
|
|
+ fragment@55 {
|
|
+ target = <&sx1503_1_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1504 on I2C#0 at slave addr 0x20
|
|
+ fragment@56 {
|
|
+ target = <&sx1504_0_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1504 on I2C#1 at slave addr 0x20
|
|
+ fragment@57 {
|
|
+ target = <&sx1504_1_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1504 on I2C#0 at slave addr 0x21
|
|
+ fragment@58 {
|
|
+ target = <&sx1504_0_21>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_21_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1504 on I2C#1 at slave addr 0x21
|
|
+ fragment@59 {
|
|
+ target = <&sx1504_1_21>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_21_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1505 on I2C#0 at slave addr 0x20
|
|
+ fragment@60 {
|
|
+ target = <&sx1505_0_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1505 on I2C#1 at slave addr 0x20
|
|
+ fragment@61 {
|
|
+ target = <&sx1505_1_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1505 on I2C#0 at slave addr 0x21
|
|
+ fragment@62 {
|
|
+ target = <&sx1505_0_21>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_21_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1505 on I2C#1 at slave addr 0x21
|
|
+ fragment@63 {
|
|
+ target = <&sx1505_1_21>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_21_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1506 on I2C#0 at slave addr 0x20
|
|
+ fragment@64 {
|
|
+ target = <&sx1506_0_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1506 on I2C#1 at slave addr 0x20
|
|
+ fragment@65 {
|
|
+ target = <&sx1506_1_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x3E
|
|
+ fragment@66 {
|
|
+ target = <&sx1507_0_3E>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_3E_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x3E
|
|
+ fragment@67 {
|
|
+ target = <&sx1507_1_3E>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_3E_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x3F
|
|
+ fragment@68 {
|
|
+ target = <&sx1507_0_3F>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_3F_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x3F
|
|
+ fragment@69 {
|
|
+ target = <&sx1507_1_3F>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_3F_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x70
|
|
+ fragment@70 {
|
|
+ target = <&sx1507_0_70>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_70_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x70
|
|
+ fragment@71 {
|
|
+ target = <&sx1507_1_70>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_70_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x71
|
|
+ fragment@72 {
|
|
+ target = <&sx1507_0_71>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_71_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x71
|
|
+ fragment@73 {
|
|
+ target = <&sx1507_1_71>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_71_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x20
|
|
+ fragment@74 {
|
|
+ target = <&sx1508_0_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x20
|
|
+ fragment@75 {
|
|
+ target = <&sx1508_1_20>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_20_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x21
|
|
+ fragment@76 {
|
|
+ target = <&sx1508_0_21>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_21_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x21
|
|
+ fragment@77 {
|
|
+ target = <&sx1508_1_21>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_21_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x22
|
|
+ fragment@78 {
|
|
+ target = <&sx1508_0_22>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_22_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x22
|
|
+ fragment@79 {
|
|
+ target = <&sx1508_1_22>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_22_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x23
|
|
+ fragment@80 {
|
|
+ target = <&sx1508_0_23>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_23_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x23
|
|
+ fragment@81 {
|
|
+ target = <&sx1508_1_23>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_23_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x3E
|
|
+ fragment@82 {
|
|
+ target = <&sx1509_0_3E>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_3E_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x3E
|
|
+ fragment@83 {
|
|
+ target = <&sx1509_1_3E>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_3E_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x3F
|
|
+ fragment@84 {
|
|
+ target = <&sx1509_0_3F>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_3F_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x3F
|
|
+ fragment@85 {
|
|
+ target = <&sx1509_1_3F>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_3F_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x70
|
|
+ fragment@86 {
|
|
+ target = <&sx1509_0_70>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_70_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x70
|
|
+ fragment@87 {
|
|
+ target = <&sx1509_1_70>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_70_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x71
|
|
+ fragment@88 {
|
|
+ target = <&sx1509_0_71>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_0_71_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x71
|
|
+ fragment@89 {
|
|
+ target = <&sx1509_1_71>;
|
|
+ __dormant__ {
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupt-controller;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sx150x_1_71_pins>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x20
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@90 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_0_20_pins: sx150x_0_20_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-0-20-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x20
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@91 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_1_20_pins: sx150x_1_20_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-1-20-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x21
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@92 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_0_21_pins: sx150x_0_21_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-0-21-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x21
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@93 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_1_21_pins: sx150x_1_21_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-1-21-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x22
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@94 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_0_22_pins: sx150x_0_22_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-0-22-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x22
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@95 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_1_22_pins: sx150x_1_22_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-1-22-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x23
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@96 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_0_23_pins: sx150x_0_23_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-0-23-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x23
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@97 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_1_23_pins: sx150x_1_23_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-1-23-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x3E
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@98 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_0_3E_pins: sx150x_0_3E_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-0-3E-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x3E
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@99 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_1_3E_pins: sx150x_1_3E_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-1-3E-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x3F
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@100 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_0_3F_pins: sx150x_0_3F_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-0-3F-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x3F
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@101 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_1_3F_pins: sx150x_1_3F_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-1-3F-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x70
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@102 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_0_70_pins: sx150x_0_70_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-0-70-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x70
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@103 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_1_70_pins: sx150x_1_70_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-1-70-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x71
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@104 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_0_71_pins: sx150x_0_71_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-0-71-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x71
|
|
+ // Configure as a input with no pull-up/down
|
|
+ fragment@105 {
|
|
+ target = <&gpio>;
|
|
+ __dormant__ {
|
|
+ sx150x_1_71_pins: sx150x_1_71_pins {
|
|
+ brcm,pins = <0>; /* overwritten by sx150x-1-71-int-gpio parameter */
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ sx1501-0-20 = <0>,"+0+2";
|
|
+ sx1501-1-20 = <0>,"+1+3";
|
|
+ sx1501-0-21 = <0>,"+0+4";
|
|
+ sx1501-1-21 = <0>,"+1+5";
|
|
+ sx1502-0-20 = <0>,"+0+6";
|
|
+ sx1502-1-20 = <0>,"+1+7";
|
|
+ sx1502-0-21 = <0>,"+0+8";
|
|
+ sx1502-1-21 = <0>,"+1+9";
|
|
+ sx1503-0-20 = <0>,"+0+10";
|
|
+ sx1503-1-20 = <0>,"+1+11";
|
|
+ sx1504-0-20 = <0>,"+0+12";
|
|
+ sx1504-1-20 = <0>,"+1+13";
|
|
+ sx1504-0-21 = <0>,"+0+14";
|
|
+ sx1504-1-21 = <0>,"+1+15";
|
|
+ sx1505-0-20 = <0>,"+0+16";
|
|
+ sx1505-1-20 = <0>,"+1+17";
|
|
+ sx1505-0-21 = <0>,"+0+18";
|
|
+ sx1505-1-21 = <0>,"+1+19";
|
|
+ sx1506-0-20 = <0>,"+0+20";
|
|
+ sx1506-1-20 = <0>,"+1+21";
|
|
+ sx1507-0-3E = <0>,"+0+22";
|
|
+ sx1507-1-3E = <0>,"+1+23";
|
|
+ sx1507-0-3F = <0>,"+0+24";
|
|
+ sx1507-1-3F = <0>,"+1+25";
|
|
+ sx1507-0-70 = <0>,"+0+26";
|
|
+ sx1507-1-70 = <0>,"+1+27";
|
|
+ sx1507-0-71 = <0>,"+0+28";
|
|
+ sx1507-1-71 = <0>,"+1+29";
|
|
+ sx1508-0-20 = <0>,"+0+30";
|
|
+ sx1508-1-20 = <0>,"+1+31";
|
|
+ sx1508-0-21 = <0>,"+0+32";
|
|
+ sx1508-1-21 = <0>,"+1+33";
|
|
+ sx1508-0-22 = <0>,"+0+34";
|
|
+ sx1508-1-22 = <0>,"+1+35";
|
|
+ sx1508-0-23 = <0>,"+0+36";
|
|
+ sx1508-1-23 = <0>,"+1+37";
|
|
+ sx1509-0-3E = <0>,"+0+38";
|
|
+ sx1509-1-3E = <0>,"+1+39";
|
|
+ sx1509-0-3F = <0>,"+0+40";
|
|
+ sx1509-1-3F = <0>,"+1+41";
|
|
+ sx1509-0-70 = <0>,"+0+42";
|
|
+ sx1509-1-70 = <0>,"+1+43";
|
|
+ sx1509-0-71 = <0>,"+0+44";
|
|
+ sx1509-1-71 = <0>,"+1+45";
|
|
+ sx1501-0-20-int-gpio = <0>,"+46+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1501_0_20>,"interrupts:0";
|
|
+ sx1501-1-20-int-gpio = <0>,"+47+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1501_1_20>,"interrupts:0";
|
|
+ sx1501-0-21-int-gpio = <0>,"+48+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1501_0_21>,"interrupts:0";
|
|
+ sx1501-1-21-int-gpio = <0>,"+49+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1501_1_21>,"interrupts:0";
|
|
+ sx1502-0-20-int-gpio = <0>,"+50+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1502_0_20>,"interrupts:0";
|
|
+ sx1502-1-20-int-gpio = <0>,"+51+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1502_1_20>,"interrupts:0";
|
|
+ sx1502-0-21-int-gpio = <0>,"+52+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1502_0_21>,"interrupts:0";
|
|
+ sx1502-1-21-int-gpio = <0>,"+53+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1502_1_21>,"interrupts:0";
|
|
+ sx1503-0-20-int-gpio = <0>,"+54+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1503_0_20>,"interrupts:0";
|
|
+ sx1503-1-20-int-gpio = <0>,"+55+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1503_1_20>,"interrupts:0";
|
|
+ sx1504-0-20-int-gpio = <0>,"+56+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1504_0_20>,"interrupts:0";
|
|
+ sx1504-1-20-int-gpio = <0>,"+57+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1504_1_20>,"interrupts:0";
|
|
+ sx1504-0-21-int-gpio = <0>,"+58+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1504_0_21>,"interrupts:0";
|
|
+ sx1504-1-21-int-gpio = <0>,"+59+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1504_1_21>,"interrupts:0";
|
|
+ sx1505-0-20-int-gpio = <0>,"+60+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1505_0_20>,"interrupts:0";
|
|
+ sx1505-1-20-int-gpio = <0>,"+61+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1505_1_20>,"interrupts:0";
|
|
+ sx1505-0-21-int-gpio = <0>,"+62+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1505_0_21>,"interrupts:0";
|
|
+ sx1505-1-21-int-gpio = <0>,"+63+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1505_1_21>,"interrupts:0";
|
|
+ sx1506-0-20-int-gpio = <0>,"+64+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1506_0_20>,"interrupts:0";
|
|
+ sx1506-1-20-int-gpio = <0>,"+65+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1506_1_20>,"interrupts:0";
|
|
+ sx1507-0-3E-int-gpio = <0>,"+66+98", <&sx150x_0_3E_pins>,"brcm,pins:0", <&sx1507_0_3E>,"interrupts:0";
|
|
+ sx1507-1-3E-int-gpio = <0>,"+67+99", <&sx150x_1_3E_pins>,"brcm,pins:0", <&sx1507_1_3E>,"interrupts:0";
|
|
+ sx1507-0-3F-int-gpio = <0>,"+68+100", <&sx150x_0_3F_pins>,"brcm,pins:0", <&sx1507_0_3F>,"interrupts:0";
|
|
+ sx1507-1-3F-int-gpio = <0>,"+69+101", <&sx150x_1_3F_pins>,"brcm,pins:0", <&sx1507_1_3F>,"interrupts:0";
|
|
+ sx1507-0-70-int-gpio = <0>,"+60+102", <&sx150x_0_70_pins>,"brcm,pins:0", <&sx1507_0_70>,"interrupts:0";
|
|
+ sx1507-1-70-int-gpio = <0>,"+71+103", <&sx150x_1_70_pins>,"brcm,pins:0", <&sx1507_1_70>,"interrupts:0";
|
|
+ sx1507-0-71-int-gpio = <0>,"+72+104", <&sx150x_0_71_pins>,"brcm,pins:0", <&sx1507_0_71>,"interrupts:0";
|
|
+ sx1507-1-71-int-gpio = <0>,"+73+105", <&sx150x_1_71_pins>,"brcm,pins:0", <&sx1507_1_71>,"interrupts:0";
|
|
+ sx1508-0-20-int-gpio = <0>,"+74+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1508_0_20>,"interrupts:0";
|
|
+ sx1508-1-20-int-gpio = <0>,"+75+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1508_1_20>,"interrupts:0";
|
|
+ sx1508-0-21-int-gpio = <0>,"+76+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1508_0_21>,"interrupts:0";
|
|
+ sx1508-1-21-int-gpio = <0>,"+77+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1508_1_21>,"interrupts:0";
|
|
+ sx1508-0-22-int-gpio = <0>,"+78+94", <&sx150x_0_22_pins>,"brcm,pins:0", <&sx1508_0_22>,"interrupts:0";
|
|
+ sx1508-1-22-int-gpio = <0>,"+79+95", <&sx150x_1_22_pins>,"brcm,pins:0", <&sx1508_1_22>,"interrupts:0";
|
|
+ sx1508-0-23-int-gpio = <0>,"+80+96", <&sx150x_0_23_pins>,"brcm,pins:0", <&sx1508_0_23>,"interrupts:0";
|
|
+ sx1508-1-23-int-gpio = <0>,"+81+97", <&sx150x_1_23_pins>,"brcm,pins:0", <&sx1508_1_23>,"interrupts:0";
|
|
+ sx1509-0-3E-int-gpio = <0>,"+82+98", <&sx150x_0_3E_pins>,"brcm,pins:0", <&sx1509_0_3E>,"interrupts:0";
|
|
+ sx1509-1-3E-int-gpio = <0>,"+83+99", <&sx150x_1_3E_pins>,"brcm,pins:0", <&sx1509_1_3E>,"interrupts:0";
|
|
+ sx1509-0-3F-int-gpio = <0>,"+84+100", <&sx150x_0_3F_pins>,"brcm,pins:0", <&sx1509_0_3F>,"interrupts:0";
|
|
+ sx1509-1-3F-int-gpio = <0>,"+85+101", <&sx150x_1_3F_pins>,"brcm,pins:0", <&sx1509_1_3F>,"interrupts:0";
|
|
+ sx1509-0-70-int-gpio = <0>,"+86+102", <&sx150x_0_70_pins>,"brcm,pins:0", <&sx1509_0_70>,"interrupts:0";
|
|
+ sx1509-1-70-int-gpio = <0>,"+87+103", <&sx150x_1_70_pins>,"brcm,pins:0", <&sx1509_1_70>,"interrupts:0";
|
|
+ sx1509-0-71-int-gpio = <0>,"+88+104", <&sx150x_0_71_pins>,"brcm,pins:0", <&sx1509_0_71>,"interrupts:0";
|
|
+ sx1509-1-71-int-gpio = <0>,"+89+105", <&sx150x_1_71_pins>,"brcm,pins:0", <&sx1509_1_71>,"interrupts:0";
|
|
+ };
|
|
+};
|
|
+
|