mirror of https://github.com/hak5/openwrt.git
70 lines
2.1 KiB
Diff
70 lines
2.1 KiB
Diff
From 0f409e6c30a04eb85792a6883e81ad2af118c7bd Mon Sep 17 00:00:00 2001
|
|
From: Matthias Reichl <github@hias.horus.com>
|
|
Date: Thu, 18 Jan 2018 12:36:44 +0100
|
|
Subject: [PATCH 161/454] ASoC: bcm2835: fix hw_params error when device is in
|
|
prepared state (#2345)
|
|
|
|
commit 8d5737a5f53902a916ee1e1cb248c9b8b883b2ea upstream.
|
|
|
|
If bcm2835 is configured as bitclock master calling hw_params()
|
|
after prepare() fails with EBUSY. This also makes it impossible to
|
|
use bcm2835 in full duplex mode.
|
|
|
|
The error is caused by the split clock setup: clk_set_rate
|
|
is called in hw_params, clk_prepare_enable in prepare. As hw_params
|
|
doesn't check if the clock was already enabled clk_set_rate
|
|
fails with EBUSY.
|
|
|
|
Fix this by moving clock startup from prepare to hw_params and
|
|
let hw_params properly deal with an already set up or enabled
|
|
clock.
|
|
|
|
Signed-off-by: Matthias Reichl <hias@horus.com>
|
|
---
|
|
sound/soc/bcm/bcm2835-i2s.c | 20 ++++++++++++++------
|
|
1 file changed, 14 insertions(+), 6 deletions(-)
|
|
|
|
--- a/sound/soc/bcm/bcm2835-i2s.c
|
|
+++ b/sound/soc/bcm/bcm2835-i2s.c
|
|
@@ -130,6 +130,7 @@ struct bcm2835_i2s_dev {
|
|
struct regmap *i2s_regmap;
|
|
struct clk *clk;
|
|
bool clk_prepared;
|
|
+ int clk_rate;
|
|
};
|
|
|
|
static void bcm2835_i2s_start_clock(struct bcm2835_i2s_dev *dev)
|
|
@@ -419,10 +420,19 @@ static int bcm2835_i2s_hw_params(struct
|
|
}
|
|
|
|
/* Clock should only be set up here if CPU is clock master */
|
|
- if (bit_clock_master) {
|
|
- ret = clk_set_rate(dev->clk, bclk_rate);
|
|
- if (ret)
|
|
- return ret;
|
|
+ if (bit_clock_master &&
|
|
+ (!dev->clk_prepared || dev->clk_rate != bclk_rate)) {
|
|
+ if (dev->clk_prepared)
|
|
+ bcm2835_i2s_stop_clock(dev);
|
|
+
|
|
+ if (dev->clk_rate != bclk_rate) {
|
|
+ ret = clk_set_rate(dev->clk, bclk_rate);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+ dev->clk_rate = bclk_rate;
|
|
+ }
|
|
+
|
|
+ bcm2835_i2s_start_clock(dev);
|
|
}
|
|
|
|
/* Setup the frame format */
|
|
@@ -618,8 +628,6 @@ static int bcm2835_i2s_prepare(struct sn
|
|
struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
uint32_t cs_reg;
|
|
|
|
- bcm2835_i2s_start_clock(dev);
|
|
-
|
|
/*
|
|
* Clear both FIFOs if the one that should be started
|
|
* is not empty at the moment. This should only happen
|