openwrt/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts

138 lines
2.2 KiB
Plaintext

/*
* Copyright (C) 2014 Daniel Golle <daniel@makrotopia.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "ox820.dtsi"
/ {
model = "Shuttle KD20";
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk=serial";
};
pcie-controller@47C00000 {
status = "okay";
};
uart@44200000 {
status = "okay";
};
sata@45900000 {
status = "okay";
};
nand@41000000 {
status = "okay";
partition@0 {
label = "boot";
reg = <0x00000000 0x00e00000>;
/*read-only;*/
};
partition@e00000 {
label = "ubi";
reg = <0x00e00000 0x07200000>;
};
};
ethernet@40400000 {
status = "okay";
snps,phy-addr = <1>;
phy-mode = "rgmii-id";
};
ehci@40200100 {
status = "okay";
};
i2c-gpio {
compatible = "i2c-gpio";
gpios = <&GPIOB 9 0 &GPIOB 10 0>;
i2c-gpio,delay-us = <10>;
#address-cells = <1>;
#size-cells = <0>;
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
power {
label = "power";
gpios = <&GPIOA 10 1>;
linux,code = <116>;
};
reset {
label = "reset";
gpios = <&GPIOA 11 1>;
linux,code = <0x198>;
};
eject1 {
label = "eject1";
gpios = <&GPIOA 5 1>;
linux,code = <161>;
};
eject2 {
label = "eject2";
gpios = <&GPIOA 6 1>;
linux,code = <162>;
};
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "kd20:blue:status";
gpios = <&GPIOB 16 0>;
};
status2 {
label = "kd20:red:status";
gpios = <&GPIOB 17 0>;
};
hdd1blue {
label = "kd20:blue:hdd1";
gpios = <&GPIOA 27 0>;
};
hdd1red {
label = "kd20:red:hdd1";
gpios = <&GPIOB 4 0>;
};
hdd2blue {
label = "kd20:blue:hdd2";
gpios = <&GPIOB 6 0>;
};
hdd2red {
label = "kd20:red:hdd2";
gpios = <&GPIOB 7 0>;
};
usb {
label = "kd20:blue:usb";
gpios = <&GPIOB 8 0>;
};
};
beeper: beeper {
compatible = "gpio-beeper";
gpios = <&GPIOB 11 0>;
};
gpio-fan {
compatible = "gpio-fan";
gpios = <&GPIOA 2 1>;
};
};