mirror of https://github.com/hak5/openwrt.git
172 lines
4.8 KiB
C
172 lines
4.8 KiB
C
/*
|
|
* Buffalo BHR-4GRV2 board support
|
|
*
|
|
* Copyright (c) 2012 Qualcomm Atheros
|
|
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com>
|
|
*
|
|
* Based on mach-ap136.c and mach-wzr-450hp2.c
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "machtypes.h"
|
|
|
|
#define BHR_4GRV2_GPIO_LED_VPN_RED 3
|
|
#define BHR_4GRV2_GPIO_LED_VPN_GREEN 18
|
|
#define BHR_4GRV2_GPIO_LED_POWER_GREEN 19
|
|
#define BHR_4GRV2_GPIO_LED_DIAG_RED 20
|
|
|
|
#define BHR_4GRV2_GPIO_BTN_RESET 17
|
|
#define BHR_4GRV2_GPIO_BTN_ECO 21
|
|
|
|
#define BHR_4GRV2_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL (3 * BHR_4GRV2_KEYS_POLL_INTERVAL)
|
|
#define BHR_4GRV2_MAC0_OFFSET 0
|
|
#define BHR_4GRV2_MAC1_OFFSET 6
|
|
|
|
static struct gpio_led bhr_4grv2_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "buffalo:red:vpn",
|
|
.gpio = BHR_4GRV2_GPIO_LED_VPN_RED,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "buffalo:green:vpn",
|
|
.gpio = BHR_4GRV2_GPIO_LED_VPN_GREEN,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "buffalo:green:power",
|
|
.gpio = BHR_4GRV2_GPIO_LED_POWER_GREEN,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "buffalo:red:diag",
|
|
.gpio = BHR_4GRV2_GPIO_LED_DIAG_RED,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button bhr_4grv2_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "Reset button",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = BHR_4GRV2_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.desc = "ECO button",
|
|
.type = EV_KEY,
|
|
.code = BTN_0,
|
|
.debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = BHR_4GRV2_GPIO_BTN_ECO,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
|
|
static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_SGMII,
|
|
.sgmii_delay_en = true,
|
|
};
|
|
|
|
/* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
|
|
static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad6_cfg = {
|
|
.mode = AR8327_PAD_MAC_RGMII,
|
|
.txclk_delay_en = true,
|
|
.rxclk_delay_en = true,
|
|
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
|
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
|
};
|
|
|
|
static struct ar8327_platform_data bhr_4grv2_ar8327_data = {
|
|
.pad0_cfg = &bhr_4grv2_ar8327_pad0_cfg,
|
|
.pad6_cfg = &bhr_4grv2_ar8327_pad6_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
.port6_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
};
|
|
|
|
static struct mdio_board_info bhr_4grv2_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &bhr_4grv2_ar8327_data,
|
|
},
|
|
};
|
|
|
|
static void __init bhr_4grv2_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(bhr_4grv2_leds_gpio),
|
|
bhr_4grv2_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, BHR_4GRV2_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(bhr_4grv2_gpio_keys),
|
|
bhr_4grv2_gpio_keys);
|
|
|
|
mdiobus_register_board_info(bhr_4grv2_mdio0_info,
|
|
ARRAY_SIZE(bhr_4grv2_mdio0_info));
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
|
|
|
|
/* GMAC0 is connected to the RGMII interface */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_pll_data.pll_1000 = 0x56000000;
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, art + BHR_4GRV2_MAC0_OFFSET, 0);
|
|
ath79_register_eth(0);
|
|
|
|
/* GMAC1 is connected to the SGMII interface */
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth1_data.speed = SPEED_1000;
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_eth1_pll_data.pll_1000 = 0x03000101;
|
|
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, art + BHR_4GRV2_MAC1_OFFSET, 0);
|
|
ath79_register_eth(1);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_BHR_4GRV2, "BHR-4GRV2",
|
|
"Buffalo BHR-4GRV2", bhr_4grv2_setup);
|