| .. |
|
b53
|
b53: hardcode reset GPIO for Linksys WRT300N 1.1
|
2014-07-06 11:40:51 +00:00 |
|
adm6996.c
|
adm6996: the GPIO interface for the adm6996l does not support switch statistics.
|
2014-07-05 12:13:56 +00:00 |
|
adm6996.h
|
linux/generic: add MIB counters and port status to ADM6996 switch
|
2014-04-22 08:08:02 +00:00 |
|
ar8216.c
|
ar8216: define all switch_addr structs as const
|
2015-01-17 14:24:40 +00:00 |
|
ar8216.h
|
ar8216: factor out AR8327/AR8337-specific driver code into ar8327.c
|
2015-01-05 13:03:07 +00:00 |
|
ar8327.c
|
ar8216: define all switch_addr structs as const
|
2015-01-17 14:24:40 +00:00 |
|
ar8327.h
|
ar8216: move definitions from ar8216.c to ar8216.h and introduce ar8327.h
|
2015-01-05 13:02:57 +00:00 |
|
ip17xx.c
|
…
|
|
|
mvsw61xx.c
|
mvsw61xx: track and set per-VLAN port state in STU
|
2015-01-11 17:20:16 +00:00 |
|
mvsw61xx.h
|
mvsw61xx: track and set per-VLAN port state in STU
|
2015-01-11 17:20:16 +00:00 |
|
mvswitch.c
|
generic: mvswitch: add detach callback
|
2013-02-07 15:18:34 +00:00 |
|
mvswitch.h
|
…
|
|
|
psb6970.c
|
…
|
|
|
rtl8306.c
|
revert: kernel: rtl8306: fix max pvid & remove port isolation
|
2014-03-30 10:04:55 +00:00 |
|
rtl8366_smi.c
|
strict_strtoul is obsolete, use kstrtoul instead
|
2013-07-27 09:23:18 +00:00 |
|
rtl8366_smi.h
|
…
|
|
|
rtl8366rb.c
|
generic: add port mirroring/monitoring capability to rtl8366rb switch
|
2013-06-04 13:25:52 +00:00 |
|
rtl8366s.c
|
fix rtl8366s OF binding
|
2013-04-12 18:56:05 +00:00 |
|
rtl8367.c
|
rtl8367: add support for configuring the VLAN FID
|
2013-08-12 17:25:25 +00:00 |
|
rtl8367b.c
|
generic: rtl8367: add compatible string with vendor prefix
|
2013-04-06 17:19:31 +00:00 |
|
swconfig.c
|
swconfig: last vs tail
|
2014-10-29 19:24:16 +00:00 |
|
swconfig_leds.c
|
ar71xx: swconfig: use the local helper to set LED brightness on link down
|
2014-01-26 16:46:21 +00:00 |
1cb2596f19