mirror of https://github.com/hak5/openwrt.git
80 lines
2.8 KiB
Diff
80 lines
2.8 KiB
Diff
From f6d983b7bc9ae79d0eb4dea7bc30a1ad5ff428a7 Mon Sep 17 00:00:00 2001
|
|
From: Linus Walleij <linus.walleij@linaro.org>
|
|
Date: Fri, 12 Oct 2018 14:54:12 +0200
|
|
Subject: [PATCH] regulator/gpio: Allow nonexclusive GPIO access
|
|
|
|
commit b0ce7b29bfcd090ddba476f45a75ec0a797b048a upstream.
|
|
|
|
[ This is a partial cherry-pick, omitting the regulator
|
|
change which isn't required ]
|
|
|
|
This allows nonexclusive (simultaneous) access to a single
|
|
GPIO line for the fixed regulator enable line. This happens
|
|
when several regulators use the same GPIO for enabling and
|
|
disabling a regulator, and all need a handle on their GPIO
|
|
descriptor.
|
|
|
|
This solution with a special flag is not entirely elegant
|
|
and should ideally be replaced by something more careful as
|
|
this makes it possible for several consumers to
|
|
enable/disable the same GPIO line to the left and right
|
|
without any consistency. The current use inside the regulator
|
|
core should however be fine as it takes special care to
|
|
handle this.
|
|
|
|
For the state of the GPIO backend, this is still the
|
|
lesser evil compared to going back to global GPIO
|
|
numbers.
|
|
|
|
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Cc: Jon Hunter <jonathanh@nvidia.com>
|
|
Fixes: efdfeb079cc3 ("regulator: fixed: Convert to use GPIO descriptor only")
|
|
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Tested-by: Jon Hunter <jonathanh@nvidia.com>
|
|
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
---
|
|
drivers/gpio/gpiolib.c | 19 +++++++++++++++++--
|
|
include/linux/gpio/consumer.h | 1 +
|
|
2 files changed, 18 insertions(+), 2 deletions(-)
|
|
|
|
--- a/drivers/gpio/gpiolib.c
|
|
+++ b/drivers/gpio/gpiolib.c
|
|
@@ -3988,8 +3988,23 @@ struct gpio_desc *__must_check gpiod_get
|
|
* the device name as label
|
|
*/
|
|
status = gpiod_request(desc, con_id ? con_id : devname);
|
|
- if (status < 0)
|
|
- return ERR_PTR(status);
|
|
+ if (status < 0) {
|
|
+ if (status == -EBUSY && flags & GPIOD_FLAGS_BIT_NONEXCLUSIVE) {
|
|
+ /*
|
|
+ * This happens when there are several consumers for
|
|
+ * the same GPIO line: we just return here without
|
|
+ * further initialization. It is a bit if a hack.
|
|
+ * This is necessary to support fixed regulators.
|
|
+ *
|
|
+ * FIXME: Make this more sane and safe.
|
|
+ */
|
|
+ dev_info(dev, "nonexclusive access to GPIO for %s\n",
|
|
+ con_id ? con_id : devname);
|
|
+ return desc;
|
|
+ } else {
|
|
+ return ERR_PTR(status);
|
|
+ }
|
|
+ }
|
|
|
|
status = gpiod_configure_flags(desc, con_id, lookupflags, flags);
|
|
if (status < 0) {
|
|
--- a/include/linux/gpio/consumer.h
|
|
+++ b/include/linux/gpio/consumer.h
|
|
@@ -30,6 +30,7 @@ struct gpio_descs {
|
|
#define GPIOD_FLAGS_BIT_DIR_OUT BIT(1)
|
|
#define GPIOD_FLAGS_BIT_DIR_VAL BIT(2)
|
|
#define GPIOD_FLAGS_BIT_OPEN_DRAIN BIT(3)
|
|
+#define GPIOD_FLAGS_BIT_NONEXCLUSIVE BIT(4)
|
|
|
|
/**
|
|
* Optional flags that can be passed to one of gpiod_* to configure direction
|