| .. |
|
ap81
|
ap81: register ethernet devices, and add default network configuration file
|
2009-03-17 18:07:16 +00:00 |
|
ap83
|
add default network configuration for the AP83 board
|
2009-06-06 16:01:09 +00:00 |
|
ap96
|
Add support for Atheros AP96 reference board
|
2010-09-27 08:59:53 +00:00 |
|
aw-nr580
|
add default network configuration for the AW-NR580
|
2009-02-27 20:49:51 +00:00 |
|
bullet-m
|
ar71xx: add default network configuration for the Bullet M
|
2009-10-01 19:41:06 +00:00 |
|
dir-600-a1
|
ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)
|
2010-10-14 00:14:59 +00:00 |
|
dir-615-c1
|
ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards
|
2010-04-09 08:40:09 +00:00 |
|
dir-825-b1
|
tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups
|
2010-12-02 20:19:55 +00:00 |
|
eap7660d
|
ar71xx: add support for the Senao EAP7660D board
|
2010-06-18 16:22:05 +00:00 |
|
generic
|
defconfig: move defaults from /etc/config/defaults/ to /etc/defconfig/, previous location broke uci
|
2009-02-26 05:54:07 +00:00 |
|
ja76pf
|
ar71xx: add missing files for the JA76PF board
|
2010-12-10 19:55:28 +00:00 |
|
jwap003
|
ar71xx: initial support for jjPlus JWAP003
|
2010-10-01 07:09:29 +00:00 |
|
mzk-w04nu
|
defconfig: move defaults from /etc/config/defaults/ to /etc/defconfig/, previous location broke uci
|
2009-02-26 05:54:07 +00:00 |
|
nbg460n_550n_550nh
|
ar71xx: add nbg460n image generation
|
2010-12-10 15:17:03 +00:00 |
|
pb42
|
pb42: fix ethernet, remove USB registration, add default network configuration
|
2009-03-14 18:28:33 +00:00 |
|
pb44
|
ar71xx: add default network configuration for the PB44 board
|
2010-03-09 18:05:58 +00:00 |
|
rb-411
|
add default network configuration for the RB-411 board
|
2009-02-28 18:55:46 +00:00 |
|
rb-433
|
ar71xx: add default network configuration file for the RB450/RB433 boards
|
2010-06-08 20:19:23 +00:00 |
|
rb-433u
|
ar71xx: add default network config for the RB433UAH board
|
2010-06-12 13:20:41 +00:00 |
|
rb-450
|
ar71xx: add default network configuration file for the RB450/RB433 boards
|
2010-06-08 20:19:23 +00:00 |
|
rb-450g
|
Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices.
|
2010-04-05 23:03:16 +00:00 |
|
rb-750
|
ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver
|
2010-10-14 13:41:42 +00:00 |
|
routerstation
|
ar71xx: add default network configuration for RS and RS-Pro
|
2009-10-20 19:36:47 +00:00 |
|
routerstation-pro
|
Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices.
|
2010-04-05 23:03:16 +00:00 |
|
tew-632brp
|
ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards
|
2010-04-09 08:40:09 +00:00 |
|
tl-mr3220
|
ar71xx: add support for the TP-LINK TL-MR3220 v1 board
|
2010-12-10 17:57:48 +00:00 |
|
tl-mr3420
|
ar71xx: add default network configuration file for the TL-MR3420
|
2010-12-10 17:57:40 +00:00 |
|
tl-wa901nd
|
ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values)
|
2010-07-22 12:37:44 +00:00 |
|
tl-wr741nd
|
ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563
|
2010-08-16 19:21:57 +00:00 |
|
tl-wr841n-v1
|
ar71xx: add missing protocol definitions to default network configurations
|
2010-03-09 18:05:31 +00:00 |
|
tl-wr941nd
|
ar71xx: add missing protocol definitions to default network configurations
|
2010-03-09 18:05:31 +00:00 |
|
tl-wr1043nd
|
ar71xx: add default network configuration file for the TL-WR1043ND board
|
2010-02-24 13:39:20 +00:00 |
|
wndr3700
|
tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups
|
2010-12-02 20:19:55 +00:00 |
|
wndr3700v2
|
ar71xx: add support for the WNDR3700v2 board
|
2011-01-26 20:35:42 +00:00 |
|
wnr2000
|
wnr2000: enable ar8216 workaround, add network config. LAN ports now work
|
2009-02-26 05:54:32 +00:00 |
|
wp543
|
ar71xx: add default network configuration file for the WP543 board
|
2009-10-20 12:59:45 +00:00 |
|
wrt160nl
|
adjust switch default configs for the swconfig api change
|
2010-01-18 00:38:08 +00:00 |
|
wzr-hp-g300nh
|
tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups
|
2010-12-02 20:19:55 +00:00 |
67c3e0bf7e