openwrt/target/linux
Gabor Juhos 1525620b0e ramips: watchdog: use maximum possible timeout by default
As the userspace has no means to determine the maximum possible timeout, use
that as the default and let the userspace lower it when necessary.

As the result the usual OpenWrt install (with busybox's watchdog trying to set
the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at
384MHz instead of the current 20s default.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33144
2012-08-12 12:48:28 +00:00
..
adm5120 bump to 3.3.8 2012-06-05 06:57:51 +00:00
adm8668 bump to 3.3.8 2012-06-05 06:57:51 +00:00
amazon bump to 3.3.8 2012-06-05 06:57:51 +00:00
ar7 bump to 3.3.8 2012-06-05 06:57:51 +00:00
ar71xx ar71xx: simplify misc IRQ handling 2012-08-02 11:25:49 +00:00
at91 move i2c module to target modules.mk 2012-07-29 13:20:51 +00:00
atheros Add leds back after migration to sysfs 2012-07-26 17:06:55 +00:00
au1000 rename upgrade image to sysupgrade.bin for consistency 2012-07-17 16:47:57 +00:00
avr32 move mmc driver to target specific modules.mk 2012-07-25 15:50:26 +00:00
brcm47xx update tg3 driver 2012-08-05 20:27:40 +00:00
brcm63xx bcm63xx: fix USB base registers and IRQs for BCM6328 2012-08-05 23:18:22 +00:00
brcm2708 add more missing config symbols 2012-07-26 17:03:08 +00:00
cns3xxx laguna: fix eeprom read buffer size during platform configuration 2012-07-25 08:01:38 +00:00
cns21xx bump to 3.3.8 2012-06-05 06:57:51 +00:00
cobalt make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly 2012-07-25 19:36:19 +00:00
coldfire linux: move certain disabled symbols to the generic configs 2012-05-15 10:58:52 +00:00
ep93xx make sure target modules depend on the target 2012-07-26 17:03:02 +00:00
etrax linux: move certain disabled symbols to the generic configs 2012-05-15 10:58:52 +00:00
gemini bump to 3.3.8 2012-06-05 06:57:51 +00:00
generic generic: use __meminit annotation for crashlog_init_memblock 2012-08-12 10:30:41 +00:00
goldfish linux: move certain disabled symbols to the generic configs 2012-05-15 10:58:52 +00:00
imx21 linux: move certain disabled symbols to the generic configs 2012-05-15 10:58:52 +00:00
iop32x bump to 3.3.8 2012-06-05 06:57:51 +00:00
ixp4xx move ixp4xx-eth to target specific modules.mk 2012-07-25 15:50:23 +00:00
kirkwood kernel: add Marvell SoC built-in RTC to modules 2012-07-15 14:25:30 +00:00
lantiq pci gpio mapping 2012-08-08 12:14:43 +00:00
leon linux: move certain disabled symbols to the generic configs 2012-05-15 10:58:52 +00:00
malta bump to 3.3.8 2012-06-05 06:57:51 +00:00
mcs814x only support 128KiB erase block sizes 2012-08-11 12:56:09 +00:00
mpc52xx bump to 3.3.8 2012-06-05 06:57:51 +00:00
mpc83xx bump to 3.3.8 2012-06-05 06:57:51 +00:00
mpc85xx bump to 3.3.8 2012-06-05 06:57:51 +00:00
octeon move i2c driver to target modules.mk 2012-07-25 15:50:13 +00:00
omap4 bump to 3.3.8 2012-06-05 06:57:51 +00:00
omap24xx resync config 2012-07-29 13:20:39 +00:00
omap35xx linux: move certain disabled symbols to the generic configs 2012-05-15 10:58:52 +00:00
orion bump to 3.3.8 2012-06-05 06:57:51 +00:00
ppc40x move isp116x driver to target specific modules.mk 2012-07-25 15:50:45 +00:00
ppc44x bump to 3.3.8 2012-06-05 06:57:51 +00:00
ps3 linux: move certain disabled symbols to the generic configs 2012-05-15 10:58:52 +00:00
pxa bump to 3.3.8 2012-06-05 06:57:51 +00:00
pxcab linux: add broken flag to targets which are using 2.6.30 2012-04-21 15:18:54 +00:00
ramips ramips: watchdog: use maximum possible timeout by default 2012-08-12 12:48:28 +00:00
rb532 bump to 3.3.8 2012-06-05 06:57:51 +00:00
rdc remove broken flags 2012-06-16 16:45:28 +00:00
realview resync config 2012-07-27 15:35:15 +00:00
s3c24xx linux: move certain disabled symbols to the generic configs 2012-05-15 10:58:52 +00:00
sibyte bump to 3.3.8 2012-06-05 06:57:51 +00:00
sparc linux: add broken flag to targets which are using 2.6.36 2012-04-29 15:00:32 +00:00
ubicom32 linux: move certain disabled symbols to the generic configs 2012-05-15 10:58:52 +00:00
uml bump to 3.3.8 2012-06-05 06:57:51 +00:00
x86 Fix hard reset of alix/soekris hardware under heavy NIC load 2012-08-09 09:41:22 +00:00
xburst verified to work - remove broken flag 2012-06-20 19:04:35 +00:00
Makefile Add kernel_nconfig make target 2010-08-06 21:36:35 +00:00