openwrt/package/switch
Jonas Gorski 8411e5c06e bcm63xx: switch to b53 and swconfig
Switch to using the B53 switch driver where appropriate.

Use a non-tagged default config where it isn't confirmed to be
working.

Remove the switch configuration in preinit as the switch will now
be configured by the driver  to use port isolation to prevent leakage
between lan and wan.

While at it, also provide a switch config for Neufbox 6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
..
files switch: the hardware must be up while configuring Since the removal of the interface coldplug hack the timing changed in such a way that eth0 is not up during switch setup, leading to an inaccesible device. Bring up the switch interface before configuring it to mitigate the problem. 2012-03-13 21:15:41 +00:00
src switch: ROBO Switch Gigabit MII Support 2013-01-03 01:58:01 +00:00
Makefile bcm63xx: switch to b53 and swconfig 2013-01-23 10:12:40 +00:00