openwrt/target/linux
David Bauer 148d29d47b ipq40xx: add support for AVM FRITZ!Repeater 3000
Hardware
--------
CPU:   Qualcomm IPQ4019
RAM:   256M (NANYA NT5CC128M16JR-EK)
FLASH: 128M NAND (Macronix MX30LF1G18AC-XKI)
ETH:   Qualcomm QCA8072
WiFi2: IPQ4019 2T2R 2SS b/g/n
WiFi5: IPQ4019 2T2R 2SS n/ac
WiFi5: QCA9984 4T4R 4SS n/ac
LED:    - Connect green/blue/red
        - Power green
BTN:   WPS/Connect
UART:  115200n8 3.3V
       VCC - RX - TX - GND (Square is VCC)

Installation
------------
1. Grab the uboot for the Device from the 'u-boot-fritz3000'
   subdirectory. Place it in the same directory as the 'eva_ramboot.py'
   script. It is located in the 'scripts/flashing' subdirectory of the
   OpenWRT tree.

2. Assign yourself the IP address 192.168.178.10/24. Connect your
   Computer to one of the boxes LAN ports.

3. Connect Power to the Box. As soon as the LAN port of your computer
   shows link, load the U-Boot to the box using following command.

   > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz3000.bin

4. The U-Boot will now start. Now assign yourself the IP address
   192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
   server root directory and rename it to 'FRITZ3000.bin'.

5. The Box will now boot OpenWRT from RAM. This can take up to two
   minutes.

6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
   scp. SSH into the Box and first write the Bootloader to both previous
   kernel partitions.

   > mtd write /path/to/uboot-fritz3000.bin uboot0
   > mtd write /path/to/uboot-fritz3000.bin uboot1

7. Remove the AVM filesystem partitions to make room for our kernel +
   rootfs + overlayfs.

   > ubirmvol /dev/ubi0 --name=avm_filesys_0
   > ubirmvol /dev/ubi0 --name=avm_filesys_1

8. Flash OpenWRT peristently using sysupgrade.

   > sysupgrade -n /path/to/openwrt-sysupgrade.bin

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-03-13 16:25:35 +01:00
..
adm5120 kernel: bump 3.18 to 3.18.133 2019-01-28 18:17:32 +01:00
adm8668 kernel: bump 3.18 to 3.18.133 2019-01-28 18:17:32 +01:00
apm821xx apm821xx: speed up ath9k-caldata extraction 2019-03-02 12:59:48 +01:00
ar7 kernel: bump 4.9 to 4.9.153 2019-01-28 18:17:32 +01:00
ar71xx ar71xx: enable QCA955x SGMII fixup on Rambutan 2019-03-06 22:02:56 +01:00
arc770 treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
archs38 treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
armvirt armvirt: 32: enable CONFIG_ARM_LPAE 2019-02-19 13:13:49 +00:00
at91 kernel: Build: Split kmod-regmap 2019-01-27 00:16:13 +01:00
ath25 kernel: bump 4.14 to 4.14.79 2018-11-05 16:00:00 +01:00
ath79 ath79: Add GL.iNet AR-300M-Lite 2019-03-13 16:25:34 +01:00
au1000 treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
bcm53xx bcm53xx: add first DTS changes queued for the Linux 5.1 2019-02-01 07:09:27 +01:00
brcm47xx kernel: bump 4.19 to 4.19.18 2019-01-28 18:17:32 +01:00
brcm63xx brcm63xx: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
brcm2708 kernel: add kmod-input-touchscreen-ads7846 2019-02-24 01:17:01 +02:00
cns3xxx kernel: bump 4.19 to 4.19.21 2019-02-14 16:45:01 +01:00
gemini gemini: Generate harddisk image for DNS-313 2019-02-20 18:51:31 +01:00
generic kernel: bump 4.9 to 4.9.162 2019-03-07 16:32:23 +01:00
imx6 kernel: disable CONFIG_USB_IMX21_HCD in default for kernel 4.14 2019-02-17 19:22:39 +01:00
ipq40xx ipq40xx: add support for AVM FRITZ!Repeater 3000 2019-03-13 16:25:35 +01:00
ipq806x ipq806x: fix LED configuration for NEC Aterm WG2600HP 2019-02-28 11:54:09 +01:00
ixp4xx kernel: bump 4.9 to 4.9.160 2019-02-25 17:33:16 +01:00
kirkwood kernel: bump 4.19 to 4.19.24 2019-02-22 10:53:42 +01:00
lantiq fritz-tools: add support for IPQ40xx platform 2019-03-13 16:25:34 +01:00
layerscape layerscape: use wrapped nand_do_upgrade for traverse-ls1043 boards 2019-03-10 17:48:23 +01:00
malta malta: Add support for kernel 4.19 2019-01-13 16:31:40 +01:00
mcs814x kernel: bump 3.18 to 3.18.119 2018-08-20 13:03:23 +02:00
mediatek kernel: bump 4.14 to 4.14.99 2019-02-14 16:45:01 +01:00
mpc85xx mpc85xx: Fix Aerohive HiveAP-330 initramfs image 2019-03-02 13:04:54 +01:00
mvebu kernel: bump 4.14 to 4.14.104 2019-03-05 13:19:43 +01:00
mxs mxs: disable unused serial drivers 2019-03-11 19:35:43 +01:00
octeon octeon: fix typo in platform.sh 2019-01-12 19:40:13 +01:00
octeontx kernel: enable memory compaction 2018-10-09 14:29:55 +02:00
omap kernel: bump 4.14 to 4.14.77 2018-10-19 10:01:57 +02:00
omap24xx omap24xx: remove referece to not existing kmod-usb-musb-tusb6010 2018-01-15 13:13:34 +01:00
orion treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
oxnas oxnas: install wireless driver on pogoplugpro 2019-03-12 14:18:42 +01:00
pistachio kernel: bump 4.14 to 4.14.91 2019-01-07 17:09:06 +01:00
ppc40x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
ppc44x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
ramips ramips: HC5861 drop unused gpio group define in dts 2019-03-13 16:25:34 +01:00
rb532 kernel: bump 4.14 to 4.14.86 2018-12-10 11:48:44 +01:00
samsung kernel: Deactivate CONFIG_COMPAT_BRK 2018-12-26 17:32:48 +01:00
sunxi sunxi: add support for Orange Pi PC Plus 2019-03-09 18:55:15 +01:00
uml treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
x86 x86: video: disable buildtin amdgpu DRM driver 2019-02-17 19:22:39 +01:00
xburst kernel: bump 3.18 to 3.18.119 2018-08-20 13:03:23 +02:00
zynq kernel: Deactivate CONFIG_COMPAT_BRK 2018-12-26 17:32:48 +01:00
Makefile