John Crispin 0fb39e6f4b ar8216: replace ar8xxx_rmw with ar8xxx_reg_set where appropriate ... Replace ar8xxx_rmw with ar8xxx_reg_set where appropriate. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44003		2015-01-17 14:24:47 +00:00
..
b53	b53: hardcode reset GPIO for Linksys WRT300N 1.1	2014-07-06 11:40:51 +00:00
adm6996.c	adm6996: the GPIO interface for the adm6996l does not support switch statistics.	2014-07-05 12:13:56 +00:00
adm6996.h	linux/generic: add MIB counters and port status to ADM6996 switch	2014-04-22 08:08:02 +00:00
ar8216.c	ar8216: replace ar8xxx_rmw with ar8xxx_reg_set where appropriate	2015-01-17 14:24:47 +00:00
ar8216.h	ar8216: factor out AR8327/AR8337-specific driver code into ar8327.c	2015-01-05 13:03:07 +00:00
ar8327.c	ar8216: replace ar8xxx_rmw with ar8xxx_reg_set where appropriate	2015-01-17 14:24:47 +00:00
ar8327.h	ar8216: move definitions from ar8216.c to ar8216.h and introduce ar8327.h	2015-01-05 13:02:57 +00:00
ip17xx.c	…
mvsw61xx.c	mvsw61xx: track and set per-VLAN port state in STU	2015-01-11 17:20:16 +00:00
mvsw61xx.h	mvsw61xx: track and set per-VLAN port state in STU	2015-01-11 17:20:16 +00:00
mvswitch.c	…
mvswitch.h	…
psb6970.c	…
rtl8306.c	revert: kernel: rtl8306: fix max pvid & remove port isolation	2014-03-30 10:04:55 +00:00
rtl8366_smi.c	…
rtl8366_smi.h	…
rtl8366rb.c	…
rtl8366s.c	…
rtl8367.c	rtl8367: add support for configuring the VLAN FID	2013-08-12 17:25:25 +00:00
rtl8367b.c	…
swconfig.c	swconfig: last vs tail	2014-10-29 19:24:16 +00:00
swconfig_leds.c	ar71xx: swconfig: use the local helper to set LED brightness on link down	2014-01-26 16:46:21 +00:00