hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/scripts/flashing/adam2flash-502T.pl

343 lines
10 KiB
Perl
Executable File
Raw Blame History

#!/usr/bin/env perl
#
# D-Link DSL-502T flash utility
#
# Copyright (c) 2007 Oliver Jowett <oliver@opencloud.com>
#
# Based on adam2flash.pl for the D-Link DSL-G6x4T, which is:
# Copyright (C) 2005 Felix Fietkau <mailto@nbd.name>
# based on fbox recovery util by Enrik Berkhan
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
# The default DSL-502T mtd map looks like this:
#
# mtd0 0x90091000,0x903f0000 # filesystem
# mtd1 0x90010090,0x90091000 # kernel
# mtd2 0x90000000,0x90010000 # bootloader - DO NOT MODIFY
# mtd3 0x903f0000,0x90400000 # config space - DO NOT MODIFY
# mtd4 0x90010000,0x903f0000 # firmware signature + kernel + filesystem, used to flash new firmware
#
# i.e. the flash layout is:
#
# 90000000-9000FFFF mtd2 bootloader
# 90010000-9001008F ---- firmware signature )
# 90010090-90090FFF mtd1 kernel ) mtd4 spans these three regions
# 90091000-903EFFFF mtd0 filesystem )
# 903F0000-903FFFFF mtd3 config space
#
# The ADAM2 bootloader uses the mtd1 settings to find the start of the image to boot.
# The image to load contains information about the loadable size of the image. If ADAM2 sees
# that the image appears to extend beyond the end of mtd1, it will refuse to load it. On
# the DSL-502T, this manifests as the USB light blinking rapidly on boot.
#
# The OpenWRT kernel does not follow quite the same layout:
# (a) it does not have a 0x90-byte firmware signature prefix
# (b) it is larger than the default mtd1 size
#
# (a) would be avoidable (build a custom image with a 0x90-byte prefix) but (b) is unavoidable.
# So we *have* to change mtd1. The simplest thing to do seems to make it span all of
# the flashable area, producing this layout:
#
# mtd0 0x90091000,0x903f0000 # filesystem
# mtd1 0x90010000,0x903f0000 # kernel (CHANGED)
# mtd2 0x90000000,0x90010000 # bootloader - DO NOT MODIFY
# mtd3 0x903f0000,0x90400000 # config space - DO NOT MODIFY
# mtd4 0x90010000,0x903f0000 # kernel + filesystem, used to flash new firmware
#
# *** NOTE NOTE NOTE NOTE ***
#
# /dev/mtd0 .. /dev/mtd4 when using OpenWRT do **NOT** correspond to the ADAM2 mtd0-4 settings!
# Instead, OpenWRT scans the MTD itself and determines its own boundaries which are arranged
# quite differently to ADAM2. It will look something like this, see dmsg on boot:
#
# (/dev/mtd0) 0x00000000-0x00010000 : "loader" # Bootloader, read-only
# (/dev/mtd1) 0x003f0000-0x00400000 : "config" # Config space
# (/dev/mtd2) 0x00010000-0x003f0000 : "linux" # Firmware area (kernel + root fs + JFFS area)
# (/dev/mtd3) 0x000d0d58-0x003f0000 : "rootfs" # Root FS, starts immediately after kernel
# (/dev/mtd4) 0x00280000-0x003f0000 : "rootfs_data" # If rootfs is squashfs, start of JFFS area.
#
# All of those boundaries are autodetected by examining the data in flash.
#
# *** NOTE NOTE NOTE NOTE ***
use IO::Socket::INET;
use Socket;
use strict;
use warnings;
sub usage() {
print STDERR "Usage: $0 <ip> [-setmtd1] [-noflash] [firmware.bin]\n\n";
print STDERR "Acquires the ADAM2 bootloader of a D-Link DSL-504T at <ip>\n";
print STDERR "Power off the device, start this script, then power it on.\n";
print STDERR "<ip> may be any spare address on the local subnet.\n\n";
print STDERR "If a firmware file is specified, MTD settings are verified and\n";
print STDERR "then the firmware is written to the router's flash.\n";
print STDERR "The firmware type (D-Link or OpenWRT) is automatically detected.\n\n";
print STDERR " -setmtd1 update mtd1 if it is not the appropriate value for this firmware\n";
print STDERR " -noflash does normal checks, updates mtd1 if requested, but does not actually write firmware\n\n";
exit 0;
}
my $ip = shift @ARGV;
$ip and $ip =~ /\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/ or usage();
my $probe = IO::Socket::INET->new(Proto => 'udp',
Broadcast => 1,
LocalPort => 5035) or die "socket: $!";
my $setip = unpack("N", inet_aton($ip));
$setip > 0 or usage();
my @packets;
foreach my $ver ([18, 1], [22, 2]) {
push @packets, pack("vCCVNV", 0, @$ver, 1, $setip, 0);
}
print STDERR "Looking for device: ";
my $broadcast = sockaddr_in(5035, INADDR_BROADCAST);
my $scanning;
my $box;
$SIG{"ALRM"} = sub {
return if --$scanning <= 0;
foreach my $packet (@packets) {
$probe->send($packet, 0, $broadcast);
}
print STDERR ".";
};
$scanning = 15;
foreach my $packet (@packets) {
$probe->send($packet, 0, $broadcast);
}
print STDERR ".";
while($scanning) {
my $reply;
alarm(1);
if (my $peer = $probe->recv($reply, 16)) {
next if (length($reply) < 16);
my ($port, $addr) = sockaddr_in($peer);
my ($major, $minor1, $minor2, $code, $addr2) = unpack("vCCVV", $reply);
$addr2 = pack("N", $addr2);
if ($code == 2) {
$scanning = 0;
printf STDERR " found!\nADAM2 version $major.$minor1.$minor2 at %s (%s)\n", inet_ntoa($addr), inet_ntoa($addr2);
$box = inet_ntoa($addr);
}
}
}
$box or die " not found!\n";
alarm(0);
{
package ADAM2FTP;
use base qw(Net::FTP);
# ADAM2 requires upper case commands, some brain dead firewall doesn't ;-)
sub _USER {
shift->command("USER",@_)->response()
}
sub _GETENV {
my $ftp = shift;
my ($ok, $name, $value);
$ftp->command("GETENV",@_);
while(length($ok = $ftp->response()) < 1) {
my $line = $ftp->getline();
unless (defined($value)) {
chomp($line);
($name, $value) = split(/\s+/, $line, 2);
}
}
$ftp->debug_print(0, "getenv: $value\n")
if $ftp->debug();
return $value;
}
sub getenv {
my $ftp = shift;
my $name = shift;
return $ftp->_GETENV($name);
}
sub _REBOOT {
shift->command("REBOOT")->response() == Net::FTP::CMD_OK
}
sub reboot {
my $ftp = shift;
$ftp->_REBOOT;
$ftp->close;
}
}
my $file;
my $arg;
my $noflash = 0;
my $setmtd1 = 0;
while ($arg = shift @ARGV) {
if ($arg eq "-noflash") { $noflash = 1; }
elsif ($arg eq "-setmtd1") { $setmtd1 = 1; }
else { $file = $arg; }
}
if (!$file) {
print STDERR "No firmware file specified, exiting.\n";
exit 0;
}
#
# Firmware checks
#
open FILE, "<$file" or die "can't open firmware file\n";
# D-Link firmware starts with "MTD4" little-endian, then has an image header at 0x90
# OpenWRT firmware just starts with an image header at 0x00
my $signature;
my $sbytes = read FILE, $signature, 4;
($sbytes == 4) or die "can't read firmware signature: $!";
my $expectedmtd4 = "0x90010000,0x903f0000";
my $fwtype;
my $expectedmtd1;
if ($signature eq "4DTM") {
seek FILE, 0x90, 0 or die "can't read firmware signature: $!";
$sbytes = read FILE, $signature, 4;
($sbytes == 4) or die "can't read firmware signature: $!";
if ($signature eq "\x42\xfa\xed\xfe") {
$fwtype = "D-Link (little-endian)";
$expectedmtd1 = "0x90010090,0x90091000";
} elsif ($signature eq "\xde\xad\xbe\x42") {
$fwtype = "D-Link (big-endian)";
$expectedmtd1 = "0x90010090,0x90091000";
}
} elsif ($signature eq "\x42\xfa\xed\xfe") {
$fwtype = "OpenWRT (little-endian)";
$expectedmtd1 = "0x90010000,0x903f0000";
} elsif ($signature eq "\xde\xad\xbe\x42") {
$fwtype = "OpenWRT (big-endian)";
$expectedmtd1 = "0x90010000,0x903f0000";
}
$fwtype or die "Unknown firmware signature (are you sure that's the right firmware?)";
print STDERR "Firmware type: $fwtype\n";
#
# Bootloader login
#
print STDERR "logging into ADAM2 bootloader.. ";
my $ftp = ADAM2FTP->new($box, Debug => 0, Timeout => 600) or die "can't open control connection\n";
$ftp->login("adam2", "adam2") or die "can't login\n";
print STDERR "ok.\n";
#
# Hardware checks
#
print STDERR "checking hardware.. ";
my $prd = $ftp->getenv("ProductID");
my $usb = $ftp->getenv("usb_prod");
print STDERR "$prd / $usb.\n";
($prd eq "AR7RD" || $prd eq "AR7DB") or die "doesn't look like a DSL-502T?";
($usb eq "DSL-502T") or die "doesn't look like a DSL-502T?";
#
# MTD checks and update
#
print STDERR "checking MTD settings.. ";
my $mtd4 = $ftp->getenv("mtd4");
($mtd4 eq $expectedmtd4) or die "MTD4 was not as expected (should be '$expectedmtd4', was '$mtd4'). Cowardly refusing to do anything about it!";
# check MTD1 setting and update if needed
my $mtd1 = $ftp->getenv("mtd1");
if ($mtd1 ne $expectedmtd1) {
die "MTD1 was not as expected (should be '$expectedmtd1', was '$mtd1'). Run with -setmtd1 to reset mtd1" unless ($setmtd1);
print STDERR "Setting mtd1.. ";
($ftp->command("SETENV","mtd1,$expectedmtd1")->response() == Net::FTP::CMD_OK) or die "can't set mtd1";
$file = shift @ARGV;
}
print STDERR "ok.\n";
#
# Firmware size check
#
my $fwsize = (stat(FILE))[7];
printf STDERR "Firmware size: 0x%08x\n", $fwsize;
my $flashsize;
$mtd4 =~ /^(0x\w+),(0x\w+)$/ and $flashsize = hex($2) - hex($1);
printf STDERR "Available flash space: 0x%08x\n", $flashsize;
die "firmware is too large" if ($flashsize < $fwsize);
#
# Flash it!
#
if ($noflash) {
print STDERR "Not flashing firmware as -noflash was specified.\n";
exit 0;
}
seek FILE, 0, 0, or die "can't seek in firmware: $!";
print STDERR "Preparing to flash.. ";
($ftp->command("MEDIA FLSH")->response() == Net::FTP::CMD_OK) or die "can't set MEDIA FLSH";
$ftp->binary() or die "can't set binary mode";
print STDERR "ok.\n";
print STDERR "Erasing flash and establishing data connection (this may take a while): ";
my $dc = $ftp->stor("fs mtd4");
$dc or die "can't open data connection: $!\n";
print STDERR "ok.\n";
print STDERR "Writing firmware: ";
while ($fwsize > 0) {
my $buffer;
my $len = ($fwsize > 1024 ? 1024 : $fwsize);
my $rbytes = read FILE, $buffer, $len;
($rbytes < 0) and die "read error on firmware file: $!";
($rbytes == $len) or die "short read on firmware file ($rbytes < $len)";
my $wbytes = $dc->write($buffer, $len, 600);
($wbytes < 0) and die "write error on FTP data connection: $!";
($rbytes == $wbytes) or die "short write on FTP data connection ($wbytes < $rbytes)";
$fwsize -= $len;
print STDERR ".";
}
$dc->close();
print STDERR " done.\n";
#
# Reboot
#
print STDERR "Rebooting device.\n";
$ftp->reboot();
Reference in New Issue View Git Blame Copy Permalink