mirror of https://github.com/hak5/openwrt.git
213 lines
5.7 KiB
Diff
213 lines
5.7 KiB
Diff
From e5ee12817e9eac891c6b2a340f64d94d9abd355f Mon Sep 17 00:00:00 2001
|
|
From: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Date: Thu, 8 Jan 2015 18:38:09 +0100
|
|
Subject: [PATCH 4/4] ARM: mvebu: Add Armada 385 Access Point Development Board
|
|
support
|
|
|
|
The A385-AP is a board produced by Marvell that holds 3 mPCIe slot, a 16MB
|
|
SPI-NOR, 3 Gigabit Ethernet ports, USB3 and NAND flash storage.
|
|
|
|
[gregory.clement@free-electrons.com: switch the license to the dual
|
|
X11/GPL with the agreement of the author]
|
|
|
|
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 1 +
|
|
arch/arm/boot/dts/armada-385-db-ap.dts | 178 +++++++++++++++++++++++++++++++++
|
|
2 files changed, 179 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/armada-385-db-ap.dts
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -500,6 +500,7 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \
|
|
armada-375-db.dtb
|
|
dtb-$(CONFIG_MACH_ARMADA_38X) += \
|
|
armada-385-db.dtb \
|
|
+ armada-385-db-ap.dtb \
|
|
armada-385-rd.dtb
|
|
dtb-$(CONFIG_MACH_ARMADA_XP) += \
|
|
armada-xp-axpwifiap.dtb \
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
|
|
@@ -0,0 +1,178 @@
|
|
+/*
|
|
+ * Device Tree file for Marvell Armada 385 Access Point Development board
|
|
+ * (DB-88F6820-AP)
|
|
+ *
|
|
+ * Copyright (C) 2014 Marvell
|
|
+ *
|
|
+ * Nadav Haklai <nadavh@marvell.com>
|
|
+ *
|
|
+ * This file is dual-licensed: you can use it either under the terms
|
|
+ * of the GPL or the X11 license, at your option. Note that this dual
|
|
+ * licensing only applies to this file, and not this project as a
|
|
+ * whole.
|
|
+ *
|
|
+ * a) This file is licensed under the terms of the GNU General Public
|
|
+ * License version 2. This program is licensed "as is" without
|
|
+ * any warranty of any kind, whether express or implied.
|
|
+ *
|
|
+ * Or, alternatively,
|
|
+ *
|
|
+ * b) Permission is hereby granted, free of charge, to any person
|
|
+ * obtaining a copy of this software and associated documentation
|
|
+ * files (the "Software"), to deal in the Software without
|
|
+ * restriction, including without limitation the rights to use,
|
|
+ * copy, modify, merge, publish, distribute, sublicense, and/or
|
|
+ * sell copies of the Software, and to permit persons to whom the
|
|
+ * Software is furnished to do so, subject to the following
|
|
+ * conditions:
|
|
+ *
|
|
+ * The above copyright notice and this permission notice shall be
|
|
+ * included in all copies or substantial portions of the Software.
|
|
+ *
|
|
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
+ * OTHER DEALINGS IN THE SOFTWARE.
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+#include "armada-385.dtsi"
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
+/ {
|
|
+ model = "Marvell Armada 385 Access Point Development Board";
|
|
+ compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
|
|
+
|
|
+ chosen {
|
|
+ bootargs = "console=ttyS0,115200";
|
|
+ stdout-path = &uart1;
|
|
+ };
|
|
+
|
|
+ memory {
|
|
+ device_type = "memory";
|
|
+ reg = <0x00000000 0x80000000>; /* 2GB */
|
|
+ };
|
|
+
|
|
+ soc {
|
|
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
|
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
|
|
+
|
|
+ internal-regs {
|
|
+ spi1: spi@10680 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&spi1_pins>;
|
|
+ status = "okay";
|
|
+
|
|
+ spi-flash@0 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ compatible = "st,m25p128";
|
|
+ reg = <0>; /* Chip select 0 */
|
|
+ spi-max-frequency = <54000000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ i2c0: i2c@11000 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+ status = "okay";
|
|
+
|
|
+ /*
|
|
+ * This bus is wired to two EEPROM
|
|
+ * sockets, one of which holding the
|
|
+ * board ID used by the bootloader.
|
|
+ * Erasing this EEPROM's content will
|
|
+ * brick the board.
|
|
+ * Use this bus with caution.
|
|
+ */
|
|
+ };
|
|
+
|
|
+ mdio@72004 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&mdio_pins>;
|
|
+
|
|
+ phy0: ethernet-phy@1 {
|
|
+ reg = <1>;
|
|
+ };
|
|
+
|
|
+ phy1: ethernet-phy@4 {
|
|
+ reg = <4>;
|
|
+ };
|
|
+
|
|
+ phy2: ethernet-phy@6 {
|
|
+ reg = <6>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* UART0 is exposed through the JP8 connector */
|
|
+ uart0: serial@12000 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart0_pins>;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ /*
|
|
+ * UART1 is exposed through a FTDI chip
|
|
+ * wired to the mini-USB connector
|
|
+ */
|
|
+ uart1: serial@12100 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart1_pins>;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ ethernet@30000 {
|
|
+ status = "okay";
|
|
+ phy = <&phy2>;
|
|
+ phy-mode = "sgmii";
|
|
+ };
|
|
+
|
|
+ ethernet@34000 {
|
|
+ status = "okay";
|
|
+ phy = <&phy1>;
|
|
+ phy-mode = "sgmii";
|
|
+ };
|
|
+
|
|
+ ethernet@70000 {
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ /*
|
|
+ * The Reference Clock 0 is used to
|
|
+ * provide a clock to the PHY
|
|
+ */
|
|
+ pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
|
|
+ status = "okay";
|
|
+ phy = <&phy0>;
|
|
+ phy-mode = "rgmii-id";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pcie-controller {
|
|
+ status = "okay";
|
|
+
|
|
+ /*
|
|
+ * The three PCIe units are accessible through
|
|
+ * standard mini-PCIe slots on the board.
|
|
+ */
|
|
+ pcie@1,0 {
|
|
+ /* Port 0, Lane 0 */
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ pcie@2,0 {
|
|
+ /* Port 1, Lane 0 */
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ pcie@3,0 {
|
|
+ /* Port 2, Lane 0 */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|