openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

John Crispin 0afc7b9b6d add support for adm6996 phy SVN-Revision: 33592		2012-09-28 21:38:02 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	version.mk: ensure that %S is always populated with a subtarget identifier, fallback to "generic" if no subtarget exists	2012-09-24 18:26:48 +00:00
package	mac80211: add uci support for configuring antenna gain	2012-09-28 18:29:22 +00:00
scripts	AR71xx/9xxx based routers are the most common these days, select that as the default target	2012-09-28 20:54:35 +00:00
target	add support for adm6996 phy	2012-09-28 21:38:02 +00:00
toolchain	build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems	2012-09-23 09:50:01 +00:00
tools	cmake: update to version 2.8.9	2012-09-28 00:07:28 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	build: turn on package parallel builds by default and fix descriptions.	2012-09-28 18:09:41 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
rules.mk	rules.mk: add TARGET_AR and TARGET_RANLIB	2012-09-22 20:10:24 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org