mirror of https://github.com/hak5/openwrt.git
712ebe95f8
This patch adds support for the Allnet ADSL2+ Modem ALL0333CJ. Specifications: - SoC: Amazon-SE - RAM: 16MB - Storage: 4MB NOR FLash - LEDs: Power, Ethernet, DSL (Sync) - Buttons: 1x Reset Button (not currently supported, will be done) - 1x Ethernet-Port: 1x RJ45 10/100BaseTX - 1x WAN-Port: AnnexB & J, G.992.1(ADSL), G.992.3(ADSL2), G.992.5(ADSL2+) Installation: - can be done via telnet+tftp or serial console - default passwords: - via telnet (root:admin) - via webinterface http://172.16.1.254:8235/ (admin:coolwhite) Installation via telnet / tftp: host: # your own host must have an tftpd daemon, then do this: host: ifconfig eth0:172 172.16.1.1 up host: # telnet to allnet modem, root:admin host: telnet 172.16.1.254 modem: # kill this daemon, it spams your console modem: killall dsl_cpe_control modem: # change to some place in ram: modem: cd /ramdisk/tftp_upload modem: # load lede-lantiq-ase-ALL0333CJ-squashfs-sysupgrade.bin alias uImage modem: tftp -g -r uImage 172.16.1.1 modem: # load these extra tools from your tftpd via: modem: # source: https://github.com/mcmilk/uboot-utils/releases/download/0.1/mips32.tar.gz modem: tftp -g -r flashwrite 172.16.1.1 modem: tftp -g -r fw_setenv 172.16.1.1 modem: tftp -g -r fw.conf 172.16.1.1 modem: ln -s fw_setenv fw_printenv modem: chmod +x * modem: ./fw_setenv disable_recovery y modem: ./fw_setenv kernel_addr 0xb0010000 modem: ./flashwrite /dev/mtd/1 uImage 0 Installation via serial line at uboot: uboot: # erase everything exept bootloader uboot: protect on b0000000 +10000; protect on b03f0000 +10000 uboot: erase all uboot: # get new firmware via tftp: uboot: tftpboot 0x80100000 uImage; setenv kernel_addr 0xb0010000 uboot: # copy to flash: uboot: cp.b 0x80100000 $(kernel_addr) $(filesize) uboot: # disable proprietary image checking: uboot: setenv disable_recovery=y; saveenv uboot: # reboot with LEDE ;) uboot: reset Ethernet works as expected, DSL syncronization does not work properly currently, I am working on this issue. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de> |
||
---|---|---|
.. | ||
ACMP252.dts | ||
ALL0333CJ.dts | ||
ARV452CQW.dts | ||
ARV752DPW.dts | ||
ARV752DPW22.dts | ||
ARV4510PW.dts | ||
ARV4518PWR01.dts | ||
ARV4518PWR01.dtsi | ||
ARV4518PWR01A.dts | ||
ARV4519PW.dts | ||
ARV4520PW.dts | ||
ARV4525PW.dts | ||
ARV7506PW11.dts | ||
ARV7510PW22.dts | ||
ARV7518PW.dts | ||
ARV7519PW.dts | ||
ARV7519RW22.dts | ||
ARV7525PW.dts | ||
ARV8539PW22.dts | ||
ASL56026.dts | ||
BTHOMEHUBV2B.dts | ||
BTHOMEHUBV3A.dts | ||
BTHOMEHUBV5A.dts | ||
DGN1000B.dts | ||
DGN3500.dts | ||
DGN3500.dtsi | ||
DGN3500B.dts | ||
EASY50712.dts | ||
EASY50810.dts | ||
EASY80920.dtsi | ||
EASY80920NAND.dts | ||
EASY80920NOR.dts | ||
EASY88388.dts | ||
EASY88444.dts | ||
EASY98000-base.dtsi | ||
EASY98000NAND.dts | ||
EASY98000NOR.dts | ||
EASY98000SFLASH.dts | ||
EASY98020.dts | ||
EASY98020V18.dts | ||
EASY98021.dts | ||
EASY98035SYNCE.dts | ||
EASY98035SYNCE1588.dts | ||
FALCON-MDU.dts | ||
FALCON-SFP.dts | ||
FRITZ3370.dts | ||
FRITZ7320.dts | ||
FRITZ7360SL.dts | ||
GIGASX76X.dts | ||
H201L.dts | ||
P2601HNFX.dts | ||
P2812HNUF1.dts | ||
P2812HNUF3.dts | ||
P2812HNUFX.dtsi | ||
TDW89X0.dtsi | ||
TDW8970.dts | ||
TDW8980.dts | ||
VG3503J.dts | ||
VGV7510KW22.dtsi | ||
VGV7510KW22BRN.dts | ||
VGV7510KW22NOR.dts | ||
VGV7519.dtsi | ||
VGV7519BRN.dts | ||
VGV7519NOR.dts | ||
VR200v.dts | ||
WBMR.dts | ||
WBMR300.dts | ||
amazonse.dtsi | ||
ar9.dtsi | ||
danube.dtsi | ||
falcon-sflash-16M.dtsi | ||
falcon.dtsi | ||
vr9.dtsi |