| .. |
|
ar724x.dtsi
|
ath79: add QCA9550 reset sequence
|
2020-04-17 13:23:06 +02:00 |
|
ar724x_ubnt_xm.dtsi
|
ath79: generalize ubnt_xm dtsi for ar7240 and ar7241
|
2020-03-18 13:45:57 +01:00 |
|
ar724x_ubnt_xm_outdoor.dtsi
|
ath79: generalize ubnt_xm dtsi for ar7240 and ar7241
|
2020-03-18 13:45:57 +01:00 |
|
ar934x.dtsi
|
ath79: Make upstream ag71xx driver work
|
2020-02-28 17:50:46 +01:00 |
|
ar1022_iodata_wn-ag300dgr.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar1022_sitecom_wlr-7100.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar7100.dtsi
|
ath79: fix dtc compiler warnings
|
2018-12-12 12:28:26 +01:00 |
|
ar7161_adtran_bsap1800-v2.dts
|
ath79: add support for Bluesocket BSAP1880 board
|
2019-07-17 22:59:29 +02:00 |
|
ar7161_adtran_bsap1840.dts
|
ath79: add support for Bluesocket BSAP1880 board
|
2019-07-17 22:59:29 +02:00 |
|
ar7161_adtran_bsap1880.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
ar7161_aruba_ap-105.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar7161_buffalo_wzr-hp-ag300h.dts
|
ath79: also reduce spi-max-frequency for buffalo_wzr-hp-ag300h
|
2020-02-27 14:56:02 +01:00 |
|
ar7161_dlink_dir-825-b1.dts
|
ath79: fix typos in DTS
|
2019-12-11 22:50:12 +01:00 |
|
ar7161_jjplus_ja76pf2.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar7161_netgear_wndr3700-v2.dts
|
ath79: WNDR3700 v1/v2: make u-boot env partition writable
|
2020-02-04 12:19:52 +01:00 |
|
ar7161_netgear_wndr3700.dts
|
ath79: WNDR3700 v1/v2: make u-boot env partition writable
|
2020-02-04 12:19:52 +01:00 |
|
ar7161_netgear_wndr3700.dtsi
|
ath79: fix typos in DTS
|
2019-12-11 22:50:12 +01:00 |
|
ar7161_netgear_wndr3800.dts
|
ath79: fix whitespace issues in DTS files
|
2019-10-06 21:28:49 +02:00 |
|
ar7161_netgear_wndr3800ch.dts
|
ath79: add support of Netgear WNDR3800CH
|
2019-09-21 23:41:31 +02:00 |
|
ar7161_siemens_ws-ap3610.dts
|
ath79: add support for Siemens WS-AP3610
|
2020-02-16 15:36:29 +01:00 |
|
ar7161_ubnt_routerstation-pro.dts
|
ath79: add syscon compatible property to ar7100 ethernet nodes
|
2018-09-06 21:35:53 +02:00 |
|
ar7161_ubnt_routerstation.dts
|
ath79: initial support for Ubiquiti RouterStation and RouterStation Pro
|
2018-08-27 19:31:17 +02:00 |
|
ar7161_ubnt_routerstation.dtsi
|
ath79: fix typos in DTS
|
2019-12-11 22:50:12 +01:00 |
|
ar7240.dtsi
|
ath79: do not set inherited phy-mode/status properties again
|
2020-01-31 13:42:12 +01:00 |
|
ar7240_buffalo_whr-g301n.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar7240_dlink_dir-615-e4.dts
|
ath79: add D-Link DIR-615 E4
|
2019-12-19 22:41:57 +01:00 |
|
ar7240_netgear_wnr612-v2.dts
|
ath79: WNR612v2: improve device support
|
2019-10-21 13:15:05 +02:00 |
|
ar7240_netgear_wnr612-v2.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
ar7240_netgear_wnr1000-v2.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar7240_on_n150r.dts
|
ath79: WNR612v2: improve device support
|
2019-10-21 13:15:05 +02:00 |
|
ar7240_tplink.dtsi
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
2020-02-11 14:30:58 +01:00 |
|
ar7240_tplink_tl-wa.dtsi
|
ath79: add support for TP-Link TL-WA830RE v1
|
2020-02-11 14:31:05 +01:00 |
|
ar7240_tplink_tl-wa701nd-v1.dts
|
ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1
|
2020-02-21 13:55:33 +01:00 |
|
ar7240_tplink_tl-wa730re-v1.dts
|
ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1
|
2020-02-21 13:55:33 +01:00 |
|
ar7240_tplink_tl-wa801nd-v1.dts
|
ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1
|
2020-02-21 13:55:33 +01:00 |
|
ar7240_tplink_tl-wa830re-v1.dts
|
ath79: add support for TP-Link TL-WA830RE v1
|
2020-02-11 14:31:05 +01:00 |
|
ar7240_tplink_tl-wa901nd-v1.dts
|
ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1
|
2020-02-21 13:55:33 +01:00 |
|
ar7240_tplink_tl-wr.dtsi
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
2020-02-11 14:30:58 +01:00 |
|
ar7240_tplink_tl-wr740n-v1.dts
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
2020-02-11 14:30:58 +01:00 |
|
ar7240_tplink_tl-wr740n-v3.dts
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
2020-02-11 14:30:58 +01:00 |
|
ar7240_tplink_tl-wr741-v1.dts
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
2020-02-11 14:30:58 +01:00 |
|
ar7240_tplink_tl-wr743nd-v1.dts
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
2020-02-11 14:30:58 +01:00 |
|
ar7240_tplink_tl-wr841-v5.dts
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
2020-02-11 14:30:58 +01:00 |
|
ar7240_tplink_tl-wr941-v4.dts
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
2020-02-11 14:30:58 +01:00 |
|
ar7240_ubnt_bullet-m-ar7240.dts
|
ath79: add support for ubnt_bullet-m-ar7240 variant
|
2020-03-21 19:22:21 +01:00 |
|
ar7241.dtsi
|
ath79: do not set inherited phy-mode/status properties again
|
2020-01-31 13:42:12 +01:00 |
|
ar7241_netgear_wnr2000-v3.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar7241_netgear_wnr2200-8m.dts
|
ath79: add support for Netgear WNR2200
|
2019-11-01 21:14:55 +01:00 |
|
ar7241_netgear_wnr2200-16m.dts
|
ath79: add support for Netgear WNR2200
|
2019-11-01 21:14:55 +01:00 |
|
ar7241_netgear_wnr2200.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
ar7241_tplink.dtsi
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar7241_tplink_tl-mr3x20.dtsi
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar7241_tplink_tl-mr3220-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7241_tplink_tl-mr3420-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7241_tplink_tl-wr841-v7.dts
|
ath79: rename TP-LINK to TP-Link
|
2019-02-14 16:56:14 +01:00 |
|
ar7241_tplink_tl-wr842n-v1.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar7241_ubnt_airrouter.dts
|
ath79: generalize ubnt_xm dtsi for ar7240 and ar7241
|
2020-03-18 13:45:57 +01:00 |
|
ar7241_ubnt_bullet-m-ar7241.dts
|
ath79: rename ubnt_bullet-m to ubnt_bullet-m-ar7241
|
2020-03-18 13:45:57 +01:00 |
|
ar7241_ubnt_nanobridge-m.dts
|
ath79: add support for Ubiquiti NanoBridge M (XM)
|
2020-03-22 00:54:44 +01:00 |
|
ar7241_ubnt_nanostation-loco-m.dts
|
ath79: generalize ubnt_xm dtsi for ar7240 and ar7241
|
2020-03-18 13:45:57 +01:00 |
|
ar7241_ubnt_nanostation-m.dts
|
ath79: generalize ubnt_xm dtsi for ar7240 and ar7241
|
2020-03-18 13:45:57 +01:00 |
|
ar7241_ubnt_picostation-m.dts
|
ath79: generalize ubnt_xm dtsi for ar7240 and ar7241
|
2020-03-18 13:45:57 +01:00 |
|
ar7241_ubnt_rocket-m.dts
|
ath79: generalize ubnt_xm dtsi for ar7240 and ar7241
|
2020-03-18 13:45:57 +01:00 |
|
ar7241_ubnt_unifi.dts
|
ath79: DTS style improvement for Ubiquiti XM and BZ devices
|
2019-11-23 11:57:48 +01:00 |
|
ar7242.dtsi
|
ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi
|
2019-06-05 10:12:31 +02:00 |
|
ar7242_avm_fritz300e.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar7242_buffalo_bhr-4grv.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar7242_buffalo_wzr-bhr.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
ar7242_buffalo_wzr-hp-g302h-a1a0.dts
|
ath79: replace generic button node names
|
2019-11-07 17:13:18 +01:00 |
|
ar7242_buffalo_wzr-hp-g450h.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar7242_tplink_tl-wr2543-v1.dts
|
ath79: replace tab after DT label by space
|
2020-05-28 00:48:39 +02:00 |
|
ar7242_ubnt_edgeswitch-5xp.dts
|
ath79: add support for Ubiquiti EdgeSwitch/ToughSwitch 5XP
|
2020-01-14 09:38:32 +01:00 |
|
ar7242_ubnt_edgeswitch-8xp.dts
|
ath79: add generic dtsi for Ubiquiti SW boards
|
2020-01-14 09:38:32 +01:00 |
|
ar7242_ubnt_sw.dtsi
|
ath79: add generic dtsi for Ubiquiti SW boards
|
2020-01-14 09:38:32 +01:00 |
|
ar9132.dtsi
|
ath79: ag71xx: apply interface mode to MII0/1_CTRL on ar71xx/ar913x
|
2018-08-28 11:26:53 +02:00 |
|
ar9132_tplink_tl-wa901nd-v2.dts
|
ath79: fix TP-Link TL-WA901ND v2 PHY stuck in reset
|
2020-02-23 16:17:59 +01:00 |
|
ar9132_tplink_tl-wr941-v2.dts
|
ath79: replace generic button node names
|
2019-11-07 17:13:18 +01:00 |
|
ar9132_tplink_tl-wr1043nd-v1.dts
|
ath79: enable m25p,fast-read for tplink,tl-wr1043-v1
|
2020-04-14 10:47:23 +08:00 |
|
ar9330.dtsi
|
ath79: use ar934x-spi for ar933x as well
|
2020-02-06 22:53:52 +08:00 |
|
ar9330_dlink_dir-505.dts
|
ath79: add support for D-Link DIR-505
|
2020-01-15 20:38:46 +01:00 |
|
ar9330_glinet_gl-ar150.dts
|
ath79: fix LEDs for GL.inet GL-AR150
|
2020-05-31 15:44:05 +02:00 |
|
ar9330_pqi_air-pen.dts
|
ath79: reduce spi-max-frequency to 50 MHz
|
2020-02-27 12:14:09 +01:00 |
|
ar9331.dtsi
|
ath79: add tl-mr3020-v1 support
|
2018-06-08 12:19:49 +02:00 |
|
ar9331_8dev_carambola2.dts
|
ath79: replace tab after DT label by space
|
2020-05-28 00:48:39 +02:00 |
|
ar9331_alfa-network_ap121f.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar9331_embeddedwireless_dorin.dts
|
ar71xx/ath79: ew-dorin, fix the trigger level for WPS button
|
2020-03-11 10:50:20 +01:00 |
|
ar9331_etactica_eg200.dts
|
ath79: remove redundant mtd-mac-address for wmac
|
2019-10-27 18:02:44 +01:00 |
|
ar9331_glinet_64xx.dtsi
|
ath79: add support for GL.iNet 6408/6416 (GL.iNet V1)
|
2020-01-29 18:56:04 +01:00 |
|
ar9331_glinet_6408.dts
|
ath79: add support for GL.iNet 6408/6416 (GL.iNet V1)
|
2020-01-29 18:56:04 +01:00 |
|
ar9331_glinet_6416.dts
|
ath79: add support for GL.iNet 6408/6416 (GL.iNet V1)
|
2020-01-29 18:56:04 +01:00 |
|
ar9331_pisen_ts-d084.dts
|
ath79: provide label MAC address
|
2019-09-19 23:43:27 +02:00 |
|
ar9331_pisen_wmm003n.dts
|
ath79: convert devices to interrupt-driven gpio-keys
|
2019-09-22 18:28:11 +02:00 |
|
ar9331_tplink_tl-mr10u.dts
|
ath79: rename dts/image using manufacturer_board scheme
|
2018-08-06 07:31:54 +02:00 |
|
ar9331_tplink_tl-mr3020-v1.dts
|
ath79: replace tab after DT label by space
|
2020-05-28 00:48:39 +02:00 |
|
ar9331_tplink_tl-mr3040-v2.dts
|
ath79: replace tab after DT label by space
|
2020-05-28 00:48:39 +02:00 |
|
ar9331_tplink_tl-wr703n.dts
|
ath79: rename dts/image using manufacturer_board scheme
|
2018-08-06 07:31:54 +02:00 |
|
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
ar9331_tplink_tl-wr710n-v1.dts
|
ath79: fix whitespace issues in DTS files
|
2019-10-06 21:28:49 +02:00 |
|
ar9331_tplink_tl-wr740n-v4.dts
|
ath79: rename TL-WR740ND-v4 to TL-WR740N-v4
|
2019-02-14 16:56:14 +01:00 |
|
ar9331_tplink_tl-wr740n-v5.dts
|
ath79: add support for TP-Link TL-WR740N v5
|
2020-03-13 13:53:12 +01:00 |
|
ar9331_tplink_tl-wr741nd-v4.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar9331_tplink_tl-wr741nd-v4.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
ar9341.dtsi
|
ath79: do not set inherited phy-mode/status properties again
|
2020-01-31 13:42:12 +01:00 |
|
ar9341_pcs_cr3000.dts
|
ath79: do not set inherited phy-mode/status properties again
|
2020-01-31 13:42:12 +01:00 |
|
ar9341_pisen_wmb001n.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar9341_tplink.dtsi
|
ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2
|
2020-02-18 21:23:17 +01:00 |
|
ar9341_tplink_tl-mr3420-v2.dts
|
ath79: create DTSI for ar9341 TP-Link devices
|
2019-08-17 23:52:34 +08:00 |
|
ar9341_tplink_tl-wa.dtsi
|
ath79: add support for TP-Link TL-WA850RE v1
|
2020-01-22 17:18:55 +01:00 |
|
ar9341_tplink_tl-wa850re-v1.dts
|
ath79: add support for TP-Link TL-WA850RE v1
|
2020-01-22 17:18:55 +01:00 |
|
ar9341_tplink_tl-wa860re-v1.dts
|
ath79: add support for TP-Link TL-WA860RE v1
|
2020-03-26 19:14:15 +01:00 |
|
ar9341_tplink_tl-wr841-v8.dts
|
ath79: create DTSI for ar9341 TP-Link devices
|
2019-08-17 23:52:34 +08:00 |
|
ar9341_tplink_tl-wr842n-v2.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar9342_iodata_etg3-r.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar9342_ubnt_bullet-m-xw.dts
|
ath79: remove redundant includes in DTS files
|
2020-02-22 19:17:51 +01:00 |
|
ar9342_ubnt_lap-120.dts
|
ath79: remove redundant includes in DTS files
|
2020-02-22 19:17:51 +01:00 |
|
ar9342_ubnt_litebeam-ac-gen2.dts
|
ath79: remove redundant includes in DTS files
|
2020-02-22 19:17:51 +01:00 |
|
ar9342_ubnt_nanobeam-ac.dts
|
ath79: indicate boot/failsafe/upgrade for NanoBeam/Nanostation AC
|
2020-04-27 23:28:51 +02:00 |
|
ar9342_ubnt_nanostation-ac-loco.dts
|
ath79: remove redundant includes in DTS files
|
2020-02-22 19:17:51 +01:00 |
|
ar9342_ubnt_nanostation-ac.dts
|
ath79: indicate boot/failsafe/upgrade for NanoBeam/Nanostation AC
|
2020-04-27 23:28:51 +02:00 |
|
ar9342_ubnt_nanostation-loco-m-xw.dts
|
ath79: add missing reset-gpios for NanoStation Loco M (XW)
|
2020-02-24 20:42:19 +01:00 |
|
ar9342_ubnt_nanostation-m-xw.dts
|
ath79: remove redundant includes in DTS files
|
2020-02-22 19:17:51 +01:00 |
|
ar9342_ubnt_powerbeam-5ac-gen2.dts
|
ath79: add support for Ubiquiti PowerBeam 5AC Gen2
|
2020-04-27 23:17:30 +02:00 |
|
ar9342_ubnt_wa.dtsi
|
ath79: rename EEPROM to art
|
2019-11-27 22:54:36 +01:00 |
|
ar9342_ubnt_xw.dtsi
|
ath79: rename EEPROM to art
|
2019-11-27 22:54:36 +01:00 |
|
ar9344.dtsi
|
ath79: add QCA9550 reset sequence
|
2020-04-17 13:23:06 +02:00 |
|
ar9344_aerohive_hiveap-121.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar9344_comfast_cf-e120a-v3.dts
|
ath79: use rssihigh LED instead of WAN LED for status indication
|
2020-01-18 19:39:05 +01:00 |
|
ar9344_devolo_magic-2-wifi.dts
|
ath79: add support for Devolo Magic 2 WIFI
|
2020-03-07 11:02:13 +08:00 |
|
ar9344_dlink_dir-8x5.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
ar9344_dlink_dir-825-c1.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar9344_dlink_dir-835-a1.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar9344_enterasys_ws-ap3705i.dts
|
ath79: add support for Enterasys WS-AP3705i
|
2020-05-22 21:54:30 +02:00 |
|
ar9344_netgear_wndr.dtsi
|
ath79: use caldata partition label consistently
|
2020-01-15 23:04:36 +01:00 |
|
ar9344_netgear_wndr3700-v4.dts
|
ath79: add support for Netgear WNDR3700v4
|
2019-11-14 23:14:15 +01:00 |
|
ar9344_netgear_wndr4300.dts
|
ath79: split dts file for Netgear WNDR4300
|
2019-11-14 23:13:49 +01:00 |
|
ar9344_netgear_wndr4300sw.dts
|
ath79/nand: add support for Netgear WNDR4300SW
|
2020-05-24 14:44:00 +02:00 |
|
ar9344_ocedo_raccoon.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar9344_pcs_cap324.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar9344_pcs_cr5000.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar9344_qihoo_c301.dts
|
ath79: add new ar934x spi driver
|
2020-02-06 22:53:03 +08:00 |
|
ar9344_teltonika_rut9xx.dtsi
|
ath79: split Teltonika RUT955 to support other RUT9xx models
|
2020-04-29 21:32:35 +01:00 |
|
ar9344_teltonika_rut955-h7v3c0.dts
|
ath79: fix dts of Teltonika RUT9xx devices
|
2020-04-29 22:59:23 +01:00 |
|
ar9344_teltonika_rut955.dts
|
ath79: fix dts of Teltonika RUT9xx devices
|
2020-04-29 22:59:23 +01:00 |
|
ar9344_tplink_cpe.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
ar9344_tplink_cpe210-v1.dts
|
ath79: improve TP-Link CPE DTSI names for ar9344 SOC
|
2019-11-23 12:03:49 +01:00 |
|
ar9344_tplink_cpe220-v2.dts
|
ath79: improve TP-Link CPE DTSI names for ar9344 SOC
|
2019-11-23 12:03:49 +01:00 |
|
ar9344_tplink_cpe510-v1.dts
|
ath79: improve TP-Link CPE DTSI names for ar9344 SOC
|
2019-11-23 12:03:49 +01:00 |
|
ar9344_tplink_cpe510-v2.dts
|
ath79: improve TP-Link CPE DTSI names for ar9344 SOC
|
2019-11-23 12:03:49 +01:00 |
|
ar9344_tplink_cpe510-v3.dts
|
ath79: improve TP-Link CPE DTSI names for ar9344 SOC
|
2019-11-23 12:03:49 +01:00 |
|
ar9344_tplink_cpe610-v1.dts
|
ath79: improve TP-Link CPE DTSI names for ar9344 SOC
|
2019-11-23 12:03:49 +01:00 |
|
ar9344_tplink_cpe_1port.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
ar9344_tplink_cpe_2port.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
ar9344_tplink_tl-wdr3500-v1.dts
|
ath79: provide label MAC address
|
2019-09-19 23:43:27 +02:00 |
|
ar9344_tplink_tl-wdr3600-v1.dts
|
ath79: Use -v1 suffix for TP-Link WDR3600/4300
|
2019-07-03 07:45:00 +02:00 |
|
ar9344_tplink_tl-wdr4300-v1-il.dts
|
ath79: add support for TP-Link TL-WDR4300 v1 (IL)
|
2019-12-12 14:42:05 +01:00 |
|
ar9344_tplink_tl-wdr4300-v1.dts
|
ath79: Use -v1 suffix for TP-Link WDR3600/4300
|
2019-07-03 07:45:00 +02:00 |
|
ar9344_tplink_tl-wdr4300.dtsi
|
ath79: fix MAC address setup for TP-Link TL-WDR3600/TL-WDR4300
|
2019-12-21 00:27:39 +01:00 |
|
ar9344_tplink_tl-wdr4310-v1.dts
|
ath79: add support for TP-Link TL-WDR4310 v1
|
2020-03-26 15:05:49 +01:00 |
|
ar9344_tplink_tl-wdrxxxx.dtsi
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar9344_tplink_wbs210-v2.dts
|
ath79: improve TP-Link CPE DTSI names for ar9344 SOC
|
2019-11-23 12:03:49 +01:00 |
|
ar9344_tplink_wbs510-v1.dts
|
ath79: improve TP-Link CPE DTSI names for ar9344 SOC
|
2019-11-23 12:03:49 +01:00 |
|
ar9344_tplink_wbs510-v2.dts
|
ath79: improve TP-Link CPE DTSI names for ar9344 SOC
|
2019-11-23 12:03:49 +01:00 |
|
ar9344_wd_mynet-n750.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar9344_wd_mynet-wifi-rangeextender.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
ar9344_winchannel_wb2000.dts
|
ath79: convert devices to interrupt-driven gpio-keys
|
2019-09-22 18:28:11 +02:00 |
|
ar9344_zbtlink_zbt-wd323.dts
|
ath79: remove redundant mtd-mac-address for wmac
|
2019-10-27 18:02:44 +01:00 |
|
ath79.dtsi
|
ath79: Make upstream ag71xx driver work
|
2020-02-28 17:50:46 +01:00 |
|
qca953x.dtsi
|
ath79: fix QCA953x DDR and GPIO compatible bindings
|
2020-04-24 20:03:18 +02:00 |
|
qca953x_tplink_tl-wr810n.dtsi
|
ath79: replace tab after DT label by space
|
2020-05-28 00:48:39 +02:00 |
|
qca955x.dtsi
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca955x_ubnt_xc.dtsi
|
ath79: add support for Ubiquiti PowerBeam 5AC 500
|
2020-05-17 21:03:30 +02:00 |
|
qca956x.dtsi
|
ath79: add QCA9550 reset sequence
|
2020-04-17 13:23:06 +02:00 |
|
qca9531_comfast_cf-e5.dts
|
ath79: replace generic button node names
|
2019-11-07 17:13:18 +01:00 |
|
qca9531_comfast_cf-e130n-v2.dts
|
ath79: add support for COMFAST CF-E130N v2
|
2020-05-28 01:47:54 +02:00 |
|
qca9531_comfast_cf-e313ac.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9531_comfast_cf-e314n-v2.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9531_comfast_cf-e560ac.dts
|
ath79: add support for COMFAST CF-E560AC
|
2020-02-03 16:18:08 +01:00 |
|
qca9531_comfast_cf-ew72.dts
|
ath79: add support for Comfast CF-EW72
|
2020-04-07 01:00:10 +02:00 |
|
qca9531_comfast_cf-wr752ac-v1.dts
|
ath79: add support for Comfast CF-WR752AC v1
|
2020-04-09 01:06:37 +02:00 |
|
qca9531_engenius_ews511ap.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9531_glinet_gl-ar300m-lite.dts
|
ath79: fix firmware partition attributes for GL-AR300M16 and -Lite
|
2019-11-16 02:41:13 +01:00 |
|
qca9531_glinet_gl-ar300m-nand.dts
|
ath79: GL-AR300M: provide NAND support; increase to 4 MB kernel
|
2019-11-14 14:38:58 +08:00 |
|
qca9531_glinet_gl-ar300m-nor.dts
|
ath79: GL-AR300M: provide NAND support; increase to 4 MB kernel
|
2019-11-14 14:38:58 +08:00 |
|
qca9531_glinet_gl-ar300m.dtsi
|
ath79: add new ar934x spi driver
|
2020-02-06 22:53:03 +08:00 |
|
qca9531_glinet_gl-ar300m16.dts
|
ath79: fix firmware partition attributes for GL-AR300M16 and -Lite
|
2019-11-16 02:41:13 +01:00 |
|
qca9531_glinet_gl-ar750.dts
|
ath79: improve status LED definitions for GL-AR750
|
2020-04-16 00:02:03 +02:00 |
|
qca9531_glinet_gl-x750.dts
|
ath79: replace generic button node names
|
2019-11-07 17:13:18 +01:00 |
|
qca9531_tplink_archer-d50-v1.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9531_tplink_tl-mr3420-v3.dts
|
ath79: add support for TP-Link TL-MR3420 v3
|
2020-04-06 11:55:24 +02:00 |
|
qca9531_tplink_tl-mr6400-v1.dts
|
ath79: add support for TP-Link TL-MR6400
|
2020-01-21 14:15:48 +01:00 |
|
qca9531_tplink_tl-wr810n-v1.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9531_tplink_tl-wr902ac-v1.dts
|
ath79: add support for TP-Link TL-WR902AC v1
|
2019-12-19 15:40:40 +01:00 |
|
qca9531_yuncore_a770.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9533_comfast_cf-e110n-v2.dts
|
ath79: use rssihigh LED instead of WAN LED for status indication
|
2020-01-18 19:39:05 +01:00 |
|
qca9533_tplink_cpe210-v2.dts
|
ath79: fix vendor capitalization of TP-Link
|
2019-08-07 18:04:03 +02:00 |
|
qca9533_tplink_cpe210-v3.dts
|
ath79: fix vendor capitalization of TP-Link
|
2019-08-07 18:04:03 +02:00 |
|
qca9533_tplink_cpe210.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
qca9533_tplink_cpe220-v3.dts
|
ath79: add support for the TP-LINK CPE220 V3
|
2019-11-06 13:37:40 +01:00 |
|
qca9533_tplink_cpexxx.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
qca9533_tplink_tl-wa850re-v2.dts
|
ath79: add support for TP-Link TL-WA850RE v2
|
2020-01-22 23:52:51 +01:00 |
|
qca9533_tplink_tl-wr802n-v1.dts
|
ath79: add support for TP-Link TL-WR802N V1 and V2
|
2020-05-31 15:44:05 +02:00 |
|
qca9533_tplink_tl-wr802n-v2.dts
|
ath79: add support for TP-Link TL-WR802N V1 and V2
|
2020-05-31 15:44:05 +02:00 |
|
qca9533_tplink_tl-wr802n.dtsi
|
ath79: add support for TP-Link TL-WR802N V1 and V2
|
2020-05-31 15:44:05 +02:00 |
|
qca9533_tplink_tl-wr810n-v2.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9533_tplink_tl-wr841-v9.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9533_tplink_tl-wr841-v10.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9533_tplink_tl-wr841-v11.dts
|
ath79: add support for TP-Link TL-WR841N/ND v12
|
2019-08-05 10:54:11 +02:00 |
|
qca9533_tplink_tl-wr841-v11.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
qca9533_tplink_tl-wr841-v12.dts
|
ath79: add support for TP-Link TL-WR841N/ND v12
|
2019-08-05 10:54:11 +02:00 |
|
qca9533_tplink_tl-wr841.dtsi
|
ath79: replace tab after DT label by space
|
2020-05-28 00:48:39 +02:00 |
|
qca9533_tplink_tl-wr842n-v3.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9533_ubnt_acb-isp.dts
|
ath79: rename EEPROM to art
|
2019-11-27 22:54:36 +01:00 |
|
qca9556_avm_fritz-repeater.dtsi
|
ath79: enable SGMII workaround for affected boards
|
2020-04-27 12:22:02 +02:00 |
|
qca9556_avm_fritz450e.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9556_avm_fritz1750e.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts
|
ath79/mikrotik: don't use mtd-mac-address in DTS
|
2020-05-08 15:17:17 +02:00 |
|
qca9557_buffalo_bhr-4grv2.dts
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9557_iodata_wn-ac-dgr.dtsi
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9557_iodata_wn-ac1167dgr.dts
|
ath79: remove redundant includes in DTS files
|
2020-02-22 19:17:51 +01:00 |
|
qca9557_iodata_wn-ac1600dgr.dts
|
ath79: remove redundant includes in DTS files
|
2020-02-22 19:17:51 +01:00 |
|
qca9557_iodata_wn-ac1600dgr2.dts
|
ath79: remove redundant includes in DTS files
|
2020-02-22 19:17:51 +01:00 |
|
qca9558_comfast_cf-wr650ac-v1.dts
|
ath79: remove redundant includes in DTS files
|
2020-02-22 19:17:51 +01:00 |
|
qca9558_comfast_cf-wr650ac-v2.dts
|
ath79: remove redundant includes in DTS files
|
2020-02-22 19:17:51 +01:00 |
|
qca9558_comfast_cf-wr650ac.dtsi
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9558_devolo_dvl1xxx.dtsi
|
ath79: enable SGMII workaround for affected boards
|
2020-04-27 12:22:02 +02:00 |
|
qca9558_devolo_dvl1200e.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9558_devolo_dvl1200i.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9558_devolo_dvl1750c.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9558_devolo_dvl1750e.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9558_devolo_dvl1750i.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9558_devolo_dvl1750x.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9558_domywifi_dw33d.dts
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9558_engenius_ecb1750.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9558_engenius_epg5000.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9558_librerouter_librerouter-v1.dts
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9558_mikrotik_routerboard-922uags-5hpacd.dts
|
ath79/mikrotik: don't use mtd-mac-address in DTS
|
2020-05-08 15:17:17 +02:00 |
|
qca9558_netgear_ex6400.dts
|
ath79: add support for Netgear EX6400 and EX7300
|
2019-04-09 11:09:26 +02:00 |
|
qca9558_netgear_ex7300.dts
|
ath79: add support for Netgear EX6400 and EX7300
|
2019-04-09 11:09:26 +02:00 |
|
qca9558_netgear_ex7300.dtsi
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9558_ocedo_koala.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9558_ocedo_ursus.dts
|
ath79: enable SGMII workaround for affected boards
|
2020-04-27 12:22:02 +02:00 |
|
qca9558_openmesh_om5p-ac-v2.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9558_sitecom_wlr-8100.dts
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9558_tplink_archer-c.dtsi
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9558_tplink_archer-c5-v1.dts
|
ath79: improve common DTSI name for TP-Link Archer C5, C7 v1/v2
|
2019-11-14 23:12:48 +01:00 |
|
qca9558_tplink_archer-c7-v1.dts
|
ath79: improve common DTSI name for TP-Link Archer C5, C7 v1/v2
|
2019-11-14 23:12:48 +01:00 |
|
qca9558_tplink_archer-c7-v2.dts
|
ath79: improve common DTSI name for TP-Link Archer C5, C7 v1/v2
|
2019-11-14 23:12:48 +01:00 |
|
qca9558_tplink_archer-d7-v1.dts
|
ath79: add support for TP-Link Archer D7/D7b v1
|
2020-03-18 14:25:38 +01:00 |
|
qca9558_tplink_archer-d7.dtsi
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9558_tplink_archer-d7b-v1.dts
|
ath79: add support for TP-Link Archer D7/D7b v1
|
2020-03-18 14:25:38 +01:00 |
|
qca9558_tplink_re350k-v1.dts
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9558_tplink_re355-v1.dts
|
ath79: add support for TP-Link RE355 v1 and RE450 v1
|
2019-07-17 23:14:23 +02:00 |
|
qca9558_tplink_re450-v1.dts
|
ath79: add support for TP-Link RE355 v1 and RE450 v1
|
2019-07-17 23:14:23 +02:00 |
|
qca9558_tplink_rex5x.dtsi
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9558_tplink_tl-wdr4900-v2.dts
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9558_tplink_tl-wr941n-v7-cn.dts
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9558_tplink_tl-wr1043nd-v2.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9558_tplink_tl-wr1043nd-v3.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9558_tplink_tl-wr1043nd.dtsi
|
ath79: replace tab after DT label by space
|
2020-05-28 00:48:39 +02:00 |
|
qca9558_tplink_tl-wr1045nd-v2.dts
|
ath79: correct QCA9550 machine compatible binding
|
2020-04-24 20:03:00 +02:00 |
|
qca9558_trendnet_tew-823dru.dts
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9558_ubnt_powerbeam-5ac-500.dts
|
ath79: add support for Ubiquiti PowerBeam 5AC 500
|
2020-05-17 21:03:30 +02:00 |
|
qca9558_zyxel_nbg6716.dts
|
ath79: rename qca9557.dtsi to qca955x.dtsi
|
2020-04-24 20:02:29 +02:00 |
|
qca9561_avm_fritz4020.dts
|
ath79: do not set inherited phy-mode/status properties again
|
2020-01-31 13:42:12 +01:00 |
|
qca9561_tplink_archer-c5x.dtsi
|
ath79: do not set inherited phy-mode/status properties again
|
2020-01-31 13:42:12 +01:00 |
|
qca9561_tplink_archer-c6x.dtsi
|
ath79: add support for TP-Link Archer C60 v3
|
2020-03-18 13:49:06 +01:00 |
|
qca9561_tplink_archer-c25-v1.dts
|
ath79: do not set inherited phy-mode/status properties again
|
2020-01-31 13:42:12 +01:00 |
|
qca9561_tplink_archer-c58-v1.dts
|
ath79: move common definitions from Archer C58/C59 to common DTSI
|
2019-09-16 21:40:06 +02:00 |
|
qca9561_tplink_archer-c59-v1.dts
|
ath79: move common definitions from Archer C58/C59 to common DTSI
|
2019-09-16 21:40:06 +02:00 |
|
qca9561_tplink_archer-c59-v2.dts
|
ath79: add support for TP-Link Archer C59v2
|
2019-09-16 21:40:06 +02:00 |
|
qca9561_tplink_archer-c60-v1.dts
|
ath79: add support for TP-Link Archer C60 v3
|
2020-03-18 13:49:06 +01:00 |
|
qca9561_tplink_archer-c60-v2.dts
|
ath79: add support for TP-Link Archer C60 v3
|
2020-03-18 13:49:06 +01:00 |
|
qca9561_tplink_archer-c60-v3.dts
|
ath79: add support for TP-Link Archer C60 v3
|
2020-03-18 13:49:06 +01:00 |
|
qca9561_xiaomi_mi-router-4q.dts
|
ath79: convert devices to interrupt-driven gpio-keys
|
2019-09-22 18:28:11 +02:00 |
|
qca9563_dlink_dir-842-c.dtsi
|
ath79: increase spi clock for D-Link DIR-842
|
2020-05-26 22:49:18 +02:00 |
|
qca9563_dlink_dir-842-c1.dts
|
ath79: fix LEDs for D-Link DIR-842
|
2020-05-26 22:49:18 +02:00 |
|
qca9563_dlink_dir-842-c2.dts
|
ath79: fix LEDs for D-Link DIR-842
|
2020-05-26 22:49:18 +02:00 |
|
qca9563_dlink_dir-842-c3.dts
|
ath79: fix LEDs for D-Link DIR-842
|
2020-05-26 22:49:18 +02:00 |
|
qca9563_dlink_dir-859-a1.dts
|
ath79: remap D-Link DIR-859 A1 WPS button to WPS
|
2019-11-16 22:42:07 +01:00 |
|
qca9563_elecom_wrc-300ghbk2-i.dts
|
ath79: remove redundant includes in DTS files
|
2020-02-22 19:17:51 +01:00 |
|
qca9563_elecom_wrc-1750ghbk2-i.dts
|
ath79: remove redundant includes in DTS files
|
2020-02-22 19:17:51 +01:00 |
|
qca9563_elecom_wrc-ghbk2-i.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
qca9563_glinet_gl-ar750s-nor-nand.dts
|
ath79: GL-AR750S: provide NAND support; increase kernel to 4 MB
|
2019-11-14 14:38:58 +08:00 |
|
qca9563_glinet_gl-ar750s-nor.dts
|
ath79: GL-AR750S: provide NAND support; increase kernel to 4 MB
|
2019-11-14 14:38:58 +08:00 |
|
qca9563_glinet_gl-ar750s.dtsi
|
ath79: add new ar934x spi driver
|
2020-02-06 22:53:03 +08:00 |
|
qca9563_nec_wg800hp.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9563_nec_wg1200cr.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9563_netgear_wndr.dtsi
|
ath79: add new ar934x spi driver
|
2020-02-06 22:53:03 +08:00 |
|
qca9563_netgear_wndr4300-v2.dts
|
ath79: add support for Netgear WNDR4300 v2
|
2020-01-15 20:55:56 +01:00 |
|
qca9563_netgear_wndr4500-v3.dts
|
ath79: add support for Netgear WNDR4500 v3
|
2020-01-15 20:56:05 +01:00 |
|
qca9563_phicomm_k2t.dts
|
ath79: add led_ prefix for Phicomm K2T LED label
|
2020-01-18 19:39:05 +01:00 |
|
qca9563_rosinson_wr818.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9563_tplink_archer-a7-v5.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9563_tplink_archer-c2-v3.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9563_tplink_archer-c6-v2-us.dts
|
ath79: add support for TP-Link Archer C6 v2 (US) and A6 (US/TW)
|
2019-11-27 22:54:36 +01:00 |
|
qca9563_tplink_archer-c6-v2.dts
|
ath79: add support for TP-Link Archer C6 v2 (US) and A6 (US/TW)
|
2019-11-27 22:54:36 +01:00 |
|
qca9563_tplink_archer-c7-v4.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9563_tplink_archer-c7-v5.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9563_tplink_archer-x6-v2.dtsi
|
ath79: add support for TP-Link Archer C6 v2 (US) and A6 (US/TW)
|
2019-11-27 22:54:36 +01:00 |
|
qca9563_tplink_archer-x7-v5.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
qca9563_tplink_re450-v2.dts
|
ath79: add support for TP-Link RE450 v3
|
2020-05-31 15:44:05 +02:00 |
|
qca9563_tplink_re450-v3.dts
|
ath79: add support for TP-Link RE450 v3
|
2020-05-31 15:44:05 +02:00 |
|
qca9563_tplink_re450.dtsi
|
ath79: add label MAC address for TP-Link RE450 v2/v3
|
2020-05-31 15:44:05 +02:00 |
|
qca9563_tplink_tl-wr1043n-v5.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
|
qca9563_tplink_tl-wr1043n.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
qca9563_tplink_tl-wr1043nd-v4.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
qca9563_ubnt_unifiac-lite.dts
|
ath79: add support for UniFi AC-LR
|
2019-10-15 18:13:54 +02:00 |
|
qca9563_ubnt_unifiac-lite.dtsi
|
ath79: add correct phy-mode for QCA9563 boards
|
2020-03-15 00:08:14 +01:00 |
|
qca9563_ubnt_unifiac-lr.dts
|
ath79: add support for UniFi AC-LR
|
2019-10-15 18:13:54 +02:00 |
|
qca9563_ubnt_unifiac-mesh-pro.dts
|
ath79: add support for UniFi AC-Mesh Pro
|
2018-07-07 21:07:40 +02:00 |
|
qca9563_ubnt_unifiac-mesh.dts
|
ath79: add support for Unifi AC Mesh
|
2018-06-28 20:31:48 +02:00 |
|
qca9563_ubnt_unifiac-pro.dts
|
ath79: add support for UniFi AC-Mesh Pro
|
2018-07-07 21:07:40 +02:00 |
|
qca9563_ubnt_unifiac-pro.dtsi
|
ath79: rename EEPROM to art
|
2019-11-27 22:54:36 +01:00 |
|
qca9563_ubnt_unifiac.dtsi
|
ath79: rename EEPROM to art
|
2019-11-27 22:54:36 +01:00 |
|
qca9563_yuncore_a782.dts
|
ath79: add support for YunCore XD4200 and A782
|
2019-11-25 17:32:46 +01:00 |
|
qca9563_yuncore_xd4200.dts
|
ath79: add support for YunCore XD4200 and A782
|
2019-11-25 17:32:46 +01:00 |
|
qca9563_yuncore_xd4200.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
tp9343_tplink_tl-wa901nd-v4.dts
|
ath79: add support for TP-Link TL-WA901ND v4 and v5
|
2020-05-18 13:35:38 +02:00 |
|
tp9343_tplink_tl-wa901nd-v5.dts
|
ath79: add support for TP-Link TL-WA901ND v4 and v5
|
2020-05-18 13:35:38 +02:00 |
|
tp9343_tplink_tl-wa901nd.dtsi
|
ath79: add support for TP-Link TL-WA901ND v4 and v5
|
2020-05-18 13:35:38 +02:00 |
|
tp9343_tplink_tl-wr94x.dtsi
|
ath79: add support for TP-Link TL-WA901ND v4 and v5
|
2020-05-18 13:35:38 +02:00 |
|
tp9343_tplink_tl-wr940n-v3.dts
|
ath79: add support for TP9343-based TP-Link TL-WR94x devices
|
2019-08-05 21:50:15 +02:00 |
|
tp9343_tplink_tl-wr940n-v3.dtsi
|
treewide: remove dts-v1 identifier from DTSI files
|
2019-12-08 16:44:06 +01:00 |
|
tp9343_tplink_tl-wr940n-v4.dts
|
ath79: DTS file style update and harmonization
|
2019-11-06 00:27:55 +01:00 |
|
tp9343_tplink_tl-wr940n-v6.dts
|
ath79: add support for TP-Link TL-WR940N v6
|
2020-02-13 17:33:20 +01:00 |
|
tp9343_tplink_tl-wr941nd-v6.dts
|
ath79: add support for TP9343-based TP-Link TL-WR94x devices
|
2019-08-05 21:50:15 +02:00 |
|
tp9343_tplink_tl-wx.dtsi
|
ath79: replace tab after DT label by space
|
2020-05-28 00:48:39 +02:00 |
91b1a625f4