openwrt/target/linux/brcm47xx/patches-3.10/780-b44-phylib.patch

326 lines
8.7 KiB
Diff

--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -24,6 +24,7 @@ config B44
select SSB
select NET_CORE
select MII
+ select PHYLIB
---help---
If you have a network (Ethernet) controller of this type, say Y
or M and read the Ethernet-HOWTO, available from
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -29,6 +29,7 @@
#include <linux/dma-mapping.h>
#include <linux/ssb/ssb.h>
#include <linux/slab.h>
+#include <linux/phy.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -300,21 +301,23 @@ static inline int b44_writephy(struct b4
}
/* miilib interface */
-static int b44_mii_read(struct net_device *dev, int phy_id, int location)
+static int b44_mii_read(struct mii_bus *bus, int phy_id, int location)
{
u32 val;
- struct b44 *bp = netdev_priv(dev);
+ struct b44 *bp = bus->priv;
int rc = __b44_readphy(bp, phy_id, location, &val);
if (rc)
return 0xffffffff;
return val;
}
-static void b44_mii_write(struct net_device *dev, int phy_id, int location,
- int val)
+static int b44_mii_write(struct mii_bus *bus, int phy_id, int location,
+ u16 val)
{
- struct b44 *bp = netdev_priv(dev);
+ struct b44 *bp = bus->priv;
__b44_writephy(bp, phy_id, location, val);
+
+ return 0;
}
static int b44_phy_reset(struct b44 *bp)
@@ -1831,102 +1834,24 @@ static int b44_get_settings(struct net_d
{
struct b44 *bp = netdev_priv(dev);
- cmd->supported = (SUPPORTED_Autoneg);
- cmd->supported |= (SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_MII);
-
- cmd->advertising = 0;
- if (bp->flags & B44_FLAG_ADV_10HALF)
- cmd->advertising |= ADVERTISED_10baseT_Half;
- if (bp->flags & B44_FLAG_ADV_10FULL)
- cmd->advertising |= ADVERTISED_10baseT_Full;
- if (bp->flags & B44_FLAG_ADV_100HALF)
- cmd->advertising |= ADVERTISED_100baseT_Half;
- if (bp->flags & B44_FLAG_ADV_100FULL)
- cmd->advertising |= ADVERTISED_100baseT_Full;
- cmd->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
- ethtool_cmd_speed_set(cmd, ((bp->flags & B44_FLAG_100_BASE_T) ?
- SPEED_100 : SPEED_10));
- cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
- DUPLEX_FULL : DUPLEX_HALF;
- cmd->port = 0;
- cmd->phy_address = bp->phy_addr;
- cmd->transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ?
- XCVR_INTERNAL : XCVR_EXTERNAL;
- cmd->autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ?
- AUTONEG_DISABLE : AUTONEG_ENABLE;
- if (cmd->autoneg == AUTONEG_ENABLE)
- cmd->advertising |= ADVERTISED_Autoneg;
- if (!netif_running(dev)){
- ethtool_cmd_speed_set(cmd, 0);
- cmd->duplex = 0xff;
- }
- cmd->maxtxpkt = 0;
- cmd->maxrxpkt = 0;
- return 0;
+ return phy_ethtool_gset(bp->phydev, cmd);
}
static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct b44 *bp = netdev_priv(dev);
- u32 speed = ethtool_cmd_speed(cmd);
-
- /* We do not support gigabit. */
- if (cmd->autoneg == AUTONEG_ENABLE) {
- if (cmd->advertising &
- (ADVERTISED_1000baseT_Half |
- ADVERTISED_1000baseT_Full))
- return -EINVAL;
- } else if ((speed != SPEED_100 &&
- speed != SPEED_10) ||
- (cmd->duplex != DUPLEX_HALF &&
- cmd->duplex != DUPLEX_FULL)) {
- return -EINVAL;
- }
+ int ret;
spin_lock_irq(&bp->lock);
- if (cmd->autoneg == AUTONEG_ENABLE) {
- bp->flags &= ~(B44_FLAG_FORCE_LINK |
- B44_FLAG_100_BASE_T |
- B44_FLAG_FULL_DUPLEX |
- B44_FLAG_ADV_10HALF |
- B44_FLAG_ADV_10FULL |
- B44_FLAG_ADV_100HALF |
- B44_FLAG_ADV_100FULL);
- if (cmd->advertising == 0) {
- bp->flags |= (B44_FLAG_ADV_10HALF |
- B44_FLAG_ADV_10FULL |
- B44_FLAG_ADV_100HALF |
- B44_FLAG_ADV_100FULL);
- } else {
- if (cmd->advertising & ADVERTISED_10baseT_Half)
- bp->flags |= B44_FLAG_ADV_10HALF;
- if (cmd->advertising & ADVERTISED_10baseT_Full)
- bp->flags |= B44_FLAG_ADV_10FULL;
- if (cmd->advertising & ADVERTISED_100baseT_Half)
- bp->flags |= B44_FLAG_ADV_100HALF;
- if (cmd->advertising & ADVERTISED_100baseT_Full)
- bp->flags |= B44_FLAG_ADV_100FULL;
- }
- } else {
- bp->flags |= B44_FLAG_FORCE_LINK;
- bp->flags &= ~(B44_FLAG_100_BASE_T | B44_FLAG_FULL_DUPLEX);
- if (speed == SPEED_100)
- bp->flags |= B44_FLAG_100_BASE_T;
- if (cmd->duplex == DUPLEX_FULL)
- bp->flags |= B44_FLAG_FULL_DUPLEX;
- }
-
if (netif_running(dev))
b44_setup_phy(bp);
+ ret = phy_ethtool_sset(bp->phydev, cmd);
+
spin_unlock_irq(&bp->lock);
- return 0;
+ return ret;
}
static void b44_get_ringparam(struct net_device *dev,
@@ -2102,20 +2027,74 @@ static const struct ethtool_ops b44_etht
static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
- struct mii_ioctl_data *data = if_mii(ifr);
struct b44 *bp = netdev_priv(dev);
int err = -EINVAL;
if (!netif_running(dev))
goto out;
+ if (!bp->phydev)
+ return -EINVAL;
+
spin_lock_irq(&bp->lock);
- err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL);
+ err = phy_mii_ioctl(bp->phydev, ifr, cmd);
spin_unlock_irq(&bp->lock);
out:
return err;
}
+static void b44_adjust_link(struct net_device *dev)
+{
+ struct b44 *bp = netdev_priv(dev);
+ struct phy_device *phydev = bp->phydev;
+ bool status_changed = 0;
+
+ BUG_ON(!phydev);
+
+ if (bp->old_link != phydev->link) {
+ status_changed = 1;
+ bp->old_link = phydev->link;
+ }
+
+ /* reflect duplex change */
+ if (phydev->link && (bp->old_duplex != phydev->duplex)) {
+ status_changed = 1;
+ bp->old_duplex = phydev->duplex;
+ }
+
+ if (status_changed)
+ phy_print_status(phydev);
+}
+
+static int b44_mii_probe(struct net_device *dev)
+{
+ struct b44 *bp = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+ char phy_id[MII_BUS_ID_SIZE + 3];
+
+ /* connect to PHY */
+ snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
+ bp->mii_bus->id, bp->phy_addr);
+
+ phydev = phy_connect(dev, phy_id, &b44_adjust_link,
+ PHY_INTERFACE_MODE_MII);
+ if (IS_ERR(phydev)) {
+ netdev_err(dev, "could not attach PHY: %s\n", phy_id);
+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
+ return PTR_ERR(phydev);
+ }
+
+ bp->phydev = phydev;
+ bp->old_link = 0;
+ bp->old_duplex = -1;
+ bp->phy_addr = phydev->addr;
+
+ netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
+ phydev->drv->name, dev_name(&phydev->dev));
+
+ return 0;
+}
+
static int b44_get_invariants(struct b44 *bp)
{
struct ssb_device *sdev = bp->sdev;
@@ -2235,12 +2214,40 @@ static int b44_init_one(struct ssb_devic
goto err_out_powerdown;
}
- bp->mii_if.dev = dev;
- bp->mii_if.mdio_read = b44_mii_read;
- bp->mii_if.mdio_write = b44_mii_write;
- bp->mii_if.phy_id = bp->phy_addr;
- bp->mii_if.phy_id_mask = 0x1f;
- bp->mii_if.reg_num_mask = 0x1f;
+ bp->mii_bus = mdiobus_alloc();
+ if (!bp->mii_bus) {
+ dev_err(sdev->dev, "mdiobus_alloc() failed\n");
+ err = -ENOMEM;
+ goto err_out_powerdown;
+ }
+
+ bp->mii_bus->priv = bp;
+ bp->mii_bus->read = b44_mii_read;
+ bp->mii_bus->write = b44_mii_write;
+ bp->mii_bus->name = "b44_eth_mii";
+ bp->mii_bus->parent = sdev->dev;
+ bp->mii_bus->phy_mask = ~(1 << bp->phy_addr);
+ snprintf(bp->mii_bus->id, MII_BUS_ID_SIZE, "%x", instance);
+ bp->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (!bp->mii_bus->irq) {
+ dev_err(sdev->dev, "mii_bus irq allocation failed\n");
+ err = -ENOMEM;
+ goto err_out_mdiobus;
+ }
+
+ memset(bp->mii_bus->irq, PHY_POLL, sizeof(int) * PHY_MAX_ADDR);
+
+ err = mdiobus_register(bp->mii_bus);
+ if (err) {
+ dev_err(sdev->dev, "failed to register MII bus\n");
+ goto err_out_mdiobus_irq;
+ }
+
+ err = b44_mii_probe(dev);
+ if (err) {
+ dev_err(sdev->dev, "failed to probe MII bus\n");
+ goto err_out_mdiobus_unregister;
+ }
/* By default, advertise all speed/duplex settings. */
bp->flags |= (B44_FLAG_ADV_10HALF | B44_FLAG_ADV_10FULL |
@@ -2272,6 +2279,16 @@ static int b44_init_one(struct ssb_devic
return 0;
+
+err_out_mdiobus_unregister:
+ mdiobus_unregister(bp->mii_bus);
+
+err_out_mdiobus_irq:
+ kfree(bp->mii_bus->irq);
+
+err_out_mdiobus:
+ mdiobus_free(bp->mii_bus);
+
err_out_powerdown:
ssb_bus_may_powerdown(sdev->bus);
@@ -2285,8 +2302,12 @@ out:
static void b44_remove_one(struct ssb_device *sdev)
{
struct net_device *dev = ssb_get_drvdata(sdev);
+ struct b44 *bp = netdev_priv(dev);
unregister_netdev(dev);
+ mdiobus_unregister(bp->mii_bus);
+ kfree(bp->mii_bus->irq);
+ mdiobus_free(bp->mii_bus);
ssb_device_disable(sdev, 0);
ssb_bus_may_powerdown(sdev->bus);
free_netdev(dev);
--- a/drivers/net/ethernet/broadcom/b44.h
+++ b/drivers/net/ethernet/broadcom/b44.h
@@ -396,7 +396,10 @@ struct b44 {
u32 tx_pending;
u8 phy_addr;
u8 force_copybreak;
- struct mii_if_info mii_if;
+ struct phy_device *phydev;
+ struct mii_bus *mii_bus;
+ int old_link;
+ int old_duplex;
};
#endif /* _B44_H */