This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
 
 
 
 
 
 
Go to file
Jo-Philipp Wich 0422ba4687 ppp: remove stray bracked in ppp-up script, thanks swalker
SVN-Revision: 31647
2012-05-07 22:41:41 +00:00
docs kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include kernel: update linux 3.3 to 3.3.5 2012-05-07 20:11:43 +00:00
package ppp: remove stray bracked in ppp-up script, thanks swalker 2012-05-07 22:41:41 +00:00
scripts ext-toolchain.sh: don't pass CFLAGS when wrapping ld 2012-05-01 22:45:55 +00:00
target ar71xx: fix build error if PCI is disabled 2012-05-07 21:16:22 +00:00
toolchain switch to 2.6.38 2012-05-01 07:00:17 +00:00
tools scons: fix compatibility with python 3, upstream still does not support it... 2012-05-06 17:04:37 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in make xz ramdisk images also available for 2.6.39+ 2012-04-18 15:14:05 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile abort built in prereq target if there is no site config file for the current target 2012-01-19 12:19:28 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
rules.mk Use build suffix on build_dir paths 2012-04-10 10:55:55 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org