mirror of https://github.com/hak5/openwrt.git
511 lines
13 KiB
Diff
511 lines
13 KiB
Diff
From 9d67bbbef07b0568d0541f79e3cd664d71d2d96c Mon Sep 17 00:00:00 2001
|
|
From: Lars-Peter Clausen <lars@metafoo.de>
|
|
Date: Wed, 12 May 2010 14:22:36 +0200
|
|
Subject: [PATCH 4/5] Add n516 lpc driver
|
|
|
|
---
|
|
drivers/misc/Kconfig | 8 +
|
|
drivers/misc/Makefile | 1 +
|
|
drivers/misc/n516-lpc.c | 471 +++++++++++++++++++++++++++++++++++++++++++++++
|
|
3 files changed, 480 insertions(+), 0 deletions(-)
|
|
create mode 100644 drivers/misc/n516-lpc.c
|
|
|
|
--- a/drivers/misc/Kconfig
|
|
+++ b/drivers/misc/Kconfig
|
|
@@ -452,6 +452,14 @@ config PCH_PHUB
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called pch_phub.
|
|
|
|
+config N516_LPC
|
|
+ tristate "N516 keys & power controller"
|
|
+ depends on I2C
|
|
+ depends on INPUT
|
|
+ depends on POWER_SUPPLY
|
|
+ help
|
|
+ N516 keyboard & power controller driver
|
|
+
|
|
source "drivers/misc/c2port/Kconfig"
|
|
source "drivers/misc/eeprom/Kconfig"
|
|
source "drivers/misc/cb710/Kconfig"
|
|
--- a/drivers/misc/Makefile
|
|
+++ b/drivers/misc/Makefile
|
|
@@ -42,3 +42,4 @@ obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd
|
|
obj-$(CONFIG_PCH_PHUB) += pch_phub.o
|
|
obj-y += ti-st/
|
|
obj-$(CONFIG_AB8500_PWM) += ab8500-pwm.o
|
|
+obj-$(CONFIG_N516_LPC) += n516-lpc.o
|
|
--- /dev/null
|
|
+++ b/drivers/misc/n516-lpc.c
|
|
@@ -0,0 +1,471 @@
|
|
+#include <linux/module.h>
|
|
+#include <linux/version.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/fs.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/pm.h>
|
|
+#include <linux/sysctl.h>
|
|
+#include <linux/proc_fs.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/input.h>
|
|
+#include <linux/power_supply.h>
|
|
+#include <linux/suspend.h>
|
|
+
|
|
+#include <linux/i2c.h>
|
|
+
|
|
+#include <asm/mach-jz4740/irq.h>
|
|
+#include <asm/mach-jz4740/gpio.h>
|
|
+#include <asm/mach-jz4740/board-n516.h>
|
|
+
|
|
+static int batt_level=0;
|
|
+module_param(batt_level, int, 0);
|
|
+
|
|
+struct n516_lpc_chip {
|
|
+ struct i2c_client *i2c_client;
|
|
+ struct input_dev *input;
|
|
+ unsigned int battery_level;
|
|
+ unsigned int suspending:1, can_sleep:1;
|
|
+};
|
|
+
|
|
+static struct n516_lpc_chip *the_lpc;
|
|
+
|
|
+struct i2c_device_id n516_lpc_i2c_ids[] = {
|
|
+ {"LPC524", 0},
|
|
+ {},
|
|
+};
|
|
+
|
|
+MODULE_DEVICE_TABLE(i2c, n516_lpc_i2c_ids);
|
|
+
|
|
+static const unsigned short normal_i2c[] = I2C_ADDRS(0x54);
|
|
+
|
|
+static const unsigned int n516_lpc_keymap[] = {
|
|
+ [0x01] = KEY_4,
|
|
+ [0x02] = KEY_3,
|
|
+ [0x03] = KEY_2,
|
|
+ [0x04] = KEY_1,
|
|
+ [0x05] = KEY_0,
|
|
+ [0x07] = KEY_9,
|
|
+ [0x08] = KEY_8,
|
|
+ [0x09] = KEY_7,
|
|
+ [0x0a] = KEY_6,
|
|
+ [0x0b] = KEY_5,
|
|
+ [0x0d] = KEY_PLAYPAUSE,
|
|
+ [0x0e] = KEY_MENU,
|
|
+ [0x0f] = KEY_SEARCH,
|
|
+ [0x10] = KEY_DIRECTION,
|
|
+ [0x11] = KEY_SPACE,
|
|
+ [0x13] = KEY_ENTER,
|
|
+ [0x14] = KEY_UP,
|
|
+ [0x15] = KEY_DOWN,
|
|
+ [0x16] = KEY_RIGHT,
|
|
+ [0x17] = KEY_LEFT,
|
|
+ [0x19] = KEY_PAGEDOWN,
|
|
+ [0x1a] = KEY_PAGEUP,
|
|
+ [0x1c] = KEY_POWER,
|
|
+ [0x1d] = KEY_ESC,
|
|
+ [0x1e] = KEY_SLEEP,
|
|
+ [0x1f] = KEY_WAKEUP,
|
|
+};
|
|
+
|
|
+static const unsigned int batt_charge[] = {0, 7, 20, 45, 65, 80, 100};
|
|
+#define MAX_BAT_LEVEL 6
|
|
+
|
|
+static inline int n516_bat_charging(void)
|
|
+{
|
|
+ return !gpio_get_value(GPIO_CHARG_STAT_N);
|
|
+}
|
|
+
|
|
+static int n516_bat_get_status(struct power_supply *b)
|
|
+{
|
|
+ if (power_supply_am_i_supplied(b)) {
|
|
+ if (n516_bat_charging())
|
|
+ return POWER_SUPPLY_STATUS_CHARGING;
|
|
+ else
|
|
+ return POWER_SUPPLY_STATUS_FULL;
|
|
+ } else {
|
|
+ return POWER_SUPPLY_STATUS_DISCHARGING;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int n516_bat_get_charge(struct power_supply *b)
|
|
+{
|
|
+ return batt_charge[the_lpc->battery_level];
|
|
+}
|
|
+
|
|
+static int n516_bat_get_property(struct power_supply *b,
|
|
+ enum power_supply_property psp,
|
|
+ union power_supply_propval *val)
|
|
+{
|
|
+ switch (psp) {
|
|
+ case POWER_SUPPLY_PROP_STATUS:
|
|
+ val->intval = n516_bat_get_status(b);
|
|
+ break;
|
|
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
|
|
+ val->intval = 100;
|
|
+ break;
|
|
+ case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
|
|
+ val->intval = 0;
|
|
+ break;
|
|
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
|
|
+ val->intval = n516_bat_get_charge(b);
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void n516_bat_power_changed(struct power_supply *p)
|
|
+{
|
|
+ if (power_supply_am_i_supplied(p) && !n516_bat_charging())
|
|
+ the_lpc->battery_level = MAX_BAT_LEVEL;
|
|
+
|
|
+ power_supply_changed(p);
|
|
+}
|
|
+
|
|
+static enum power_supply_property n516_bat_properties[] = {
|
|
+ POWER_SUPPLY_PROP_STATUS,
|
|
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
|
|
+ POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
|
|
+ POWER_SUPPLY_PROP_CHARGE_NOW,
|
|
+};
|
|
+
|
|
+static struct power_supply n516_battery = {
|
|
+ .name = "n516-battery",
|
|
+ .get_property = n516_bat_get_property,
|
|
+ .properties = n516_bat_properties,
|
|
+ .num_properties = ARRAY_SIZE(n516_bat_properties),
|
|
+ .external_power_changed = n516_bat_power_changed,
|
|
+};
|
|
+
|
|
+static irqreturn_t n516_bat_charge_irq(int irq, void *dev)
|
|
+{
|
|
+ struct power_supply *psy = dev;
|
|
+
|
|
+ dev_dbg(psy->dev, "Battery charging IRQ\n");
|
|
+
|
|
+ if (power_supply_am_i_supplied(psy) && !n516_bat_charging())
|
|
+ the_lpc->battery_level = MAX_BAT_LEVEL;
|
|
+
|
|
+ power_supply_changed(psy);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static int n516_lpc_send_message(struct n516_lpc_chip *chip, unsigned char val)
|
|
+{
|
|
+ struct i2c_client *client = chip->i2c_client;
|
|
+ struct i2c_msg msg = {client->addr, client->flags, 1, &val};
|
|
+ int ret = 0;
|
|
+
|
|
+ ret = i2c_transfer(client->adapter, &msg, 1);
|
|
+ return ret > 0 ? 0 : ret;
|
|
+}
|
|
+
|
|
+static void n516_key_event(struct n516_lpc_chip *chip, unsigned char keycode)
|
|
+{
|
|
+ struct i2c_client *client = chip->i2c_client;
|
|
+ bool long_press = false;
|
|
+
|
|
+ if (keycode & 0x40) {
|
|
+ keycode &= ~0x40;
|
|
+ long_press = true;
|
|
+ }
|
|
+
|
|
+ dev_dbg(&client->dev, "keycode: 0x%02x, long_press: 0x%02x\n", keycode, (unsigned int)long_press);
|
|
+
|
|
+ if (keycode >= ARRAY_SIZE(n516_lpc_keymap) || n516_lpc_keymap[keycode] == 0)
|
|
+ return;
|
|
+
|
|
+ if (long_press)
|
|
+ input_report_key(chip->input, KEY_LEFTALT, 1);
|
|
+
|
|
+ input_report_key(chip->input, n516_lpc_keymap[keycode], 1);
|
|
+ input_sync(chip->input);
|
|
+ input_report_key(chip->input, n516_lpc_keymap[keycode], 0);
|
|
+
|
|
+ if (long_press)
|
|
+ input_report_key(chip->input, KEY_LEFTALT, 0);
|
|
+ input_sync(chip->input);
|
|
+}
|
|
+
|
|
+static void n516_battery_event(struct n516_lpc_chip *chip, unsigned char battery_level)
|
|
+{
|
|
+ if (battery_level != chip->battery_level) {
|
|
+ chip->battery_level = battery_level;
|
|
+ power_supply_changed(&n516_battery);
|
|
+ }
|
|
+}
|
|
+
|
|
+static irqreturn_t n516_lpc_irq_thread(int irq, void *devid)
|
|
+{
|
|
+ struct n516_lpc_chip *chip = (struct n516_lpc_chip*)devid;
|
|
+ int ret;
|
|
+ unsigned char raw_msg;
|
|
+ struct i2c_client *client = chip->i2c_client;
|
|
+ struct i2c_msg msg = {client->addr, client->flags | I2C_M_RD, 1, &raw_msg};
|
|
+
|
|
+ if (client->dev.power.status >= DPM_OFF)
|
|
+ return IRQ_HANDLED;
|
|
+
|
|
+ ret = i2c_transfer(client->adapter, &msg, 1);
|
|
+ if (ret != 1) {
|
|
+ dev_dbg(&client->dev, "I2C error: %d\n", ret);
|
|
+ return IRQ_HANDLED;
|
|
+ }
|
|
+
|
|
+ dev_dbg(&client->dev, "msg: 0x%02x\n", raw_msg);
|
|
+
|
|
+ /* Ack wakeup event */
|
|
+ if ((raw_msg & ~0x40) < ARRAY_SIZE(n516_lpc_keymap))
|
|
+ n516_key_event(chip, raw_msg);
|
|
+ else if ((raw_msg >= 0x81) && (raw_msg <= 0x87))
|
|
+ n516_battery_event(chip, raw_msg - 0x81);
|
|
+ else if (raw_msg == 0x7e)
|
|
+ n516_lpc_send_message(chip, 0x00);
|
|
+ else
|
|
+ dev_warn(&client->dev, "Unknown message: %x\n", raw_msg);
|
|
+
|
|
+ if (chip->suspending)
|
|
+ chip->can_sleep = 0;
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static void n516_lpc_power_off(void)
|
|
+{
|
|
+ struct i2c_client *client = the_lpc->i2c_client;
|
|
+ unsigned char val = 0x01;
|
|
+ struct i2c_msg msg = {client->addr, client->flags, 1, &val};
|
|
+
|
|
+ printk("Issue LPC POWEROFF command...\n");
|
|
+ while (1)
|
|
+ i2c_transfer(client->adapter, &msg, 1);
|
|
+}
|
|
+
|
|
+static int n516_lpc_detect(struct i2c_client *client, struct i2c_board_info *info)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int n516_lpc_suspend_notifier(struct notifier_block *nb,
|
|
+ unsigned long event,
|
|
+ void *dummy)
|
|
+{
|
|
+ switch(event) {
|
|
+ case PM_SUSPEND_PREPARE:
|
|
+ the_lpc->suspending = 1;
|
|
+ the_lpc->can_sleep = 1;
|
|
+ break;
|
|
+ case PM_POST_SUSPEND:
|
|
+ the_lpc->suspending = 0;
|
|
+ the_lpc->can_sleep = 1;
|
|
+ break;
|
|
+ default:
|
|
+ return NOTIFY_DONE;
|
|
+ }
|
|
+ return NOTIFY_OK;
|
|
+}
|
|
+
|
|
+static struct notifier_block n516_lpc_notif_block = {
|
|
+ .notifier_call = n516_lpc_suspend_notifier,
|
|
+};
|
|
+
|
|
+static int __devinit n516_lpc_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
|
+{
|
|
+ struct n516_lpc_chip *chip;
|
|
+ struct input_dev *input;
|
|
+ int ret = 0;
|
|
+ int i;
|
|
+
|
|
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
|
|
+ if (!chip)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ the_lpc = chip;
|
|
+ chip->i2c_client = client;
|
|
+ if ((batt_level > 0) && (batt_level < ARRAY_SIZE(batt_charge)))
|
|
+ chip->battery_level = batt_level;
|
|
+ else
|
|
+ chip->battery_level = 1;
|
|
+
|
|
+ i2c_set_clientdata(client, chip);
|
|
+
|
|
+ ret = gpio_request(GPIO_LPC_INT, "LPC interrupt request");
|
|
+ if (ret) {
|
|
+ dev_err(&client->dev, "Unable to reguest LPC INT GPIO\n");
|
|
+ goto err_gpio_req_lpcint;
|
|
+ }
|
|
+
|
|
+ ret = gpio_request(GPIO_CHARG_STAT_N, "LPC charging status");
|
|
+ if (ret) {
|
|
+ dev_err(&client->dev, "Unable to reguest CHARG STAT GPIO\n");
|
|
+ goto err_gpio_req_chargstat;
|
|
+ }
|
|
+
|
|
+ /* Enter normal mode */
|
|
+ n516_lpc_send_message(chip, 0x2);
|
|
+
|
|
+ input = input_allocate_device();
|
|
+ if (!input) {
|
|
+ dev_err(&client->dev, "Unable to allocate input device\n");
|
|
+ ret = -ENOMEM;
|
|
+ goto err_input_alloc;
|
|
+ }
|
|
+
|
|
+ chip->input = input;
|
|
+
|
|
+ __set_bit(EV_KEY, input->evbit);
|
|
+
|
|
+ for (i = 0; i < ARRAY_SIZE(n516_lpc_keymap); i++)
|
|
+ __set_bit(n516_lpc_keymap[i], input->keybit);
|
|
+
|
|
+ __set_bit(KEY_LEFTALT, input->keybit);
|
|
+
|
|
+ input->name = "n516-keys";
|
|
+ input->phys = "n516-keys/input0";
|
|
+ input->dev.parent = &client->dev;
|
|
+ input->id.bustype = BUS_I2C;
|
|
+ input->id.vendor = 0x0001;
|
|
+ input->id.product = 0x0001;
|
|
+ input->id.version = 0x0100;
|
|
+
|
|
+ ret = input_register_device(input);
|
|
+ if (ret < 0) {
|
|
+ dev_err(&client->dev, "Unable to register input device\n");
|
|
+ goto err_input_register;
|
|
+ }
|
|
+
|
|
+ ret = power_supply_register(NULL, &n516_battery);
|
|
+ if (ret) {
|
|
+ dev_err(&client->dev, "Unable to register N516 battery\n");
|
|
+ goto err_bat_reg;
|
|
+ }
|
|
+
|
|
+ ret = request_threaded_irq(gpio_to_irq(GPIO_LPC_INT), NULL,
|
|
+ n516_lpc_irq_thread,
|
|
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
+ "lpc", chip);
|
|
+ if (ret) {
|
|
+ dev_err(&client->dev, "request_irq failed: %d\n", ret);
|
|
+ goto err_request_lpc_irq;
|
|
+ }
|
|
+
|
|
+ ret = request_irq(gpio_to_irq(GPIO_CHARG_STAT_N), n516_bat_charge_irq,
|
|
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
+ "battery charging", &n516_battery);
|
|
+ if (ret) {
|
|
+ dev_err(&client->dev, "Unable to claim battery charging IRQ\n");
|
|
+ goto err_request_chrg_irq;
|
|
+ }
|
|
+
|
|
+ pm_power_off = n516_lpc_power_off;
|
|
+ ret = register_pm_notifier(&n516_lpc_notif_block);
|
|
+ if (ret) {
|
|
+ dev_err(&client->dev, "Unable to register PM notify block\n");
|
|
+ goto err_reg_pm_notifier;
|
|
+ }
|
|
+
|
|
+ device_init_wakeup(&client->dev, 1);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+ unregister_pm_notifier(&n516_lpc_notif_block);
|
|
+err_reg_pm_notifier:
|
|
+ free_irq(gpio_to_irq(GPIO_CHARG_STAT_N), &n516_battery);
|
|
+err_request_chrg_irq:
|
|
+ free_irq(gpio_to_irq(GPIO_LPC_INT), chip);
|
|
+err_request_lpc_irq:
|
|
+ power_supply_unregister(&n516_battery);
|
|
+err_bat_reg:
|
|
+ input_unregister_device(input);
|
|
+err_input_register:
|
|
+ input_free_device(input);
|
|
+err_input_alloc:
|
|
+ gpio_free(GPIO_CHARG_STAT_N);
|
|
+err_gpio_req_chargstat:
|
|
+ gpio_free(GPIO_LPC_INT);
|
|
+err_gpio_req_lpcint:
|
|
+ i2c_set_clientdata(client, NULL);
|
|
+ kfree(chip);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int __devexit n516_lpc_remove(struct i2c_client *client)
|
|
+{
|
|
+ struct n516_lpc_chip *chip = i2c_get_clientdata(client);
|
|
+
|
|
+ unregister_pm_notifier(&n516_lpc_notif_block);
|
|
+ pm_power_off = NULL;
|
|
+ free_irq(gpio_to_irq(GPIO_CHARG_STAT_N), &n516_battery);
|
|
+ free_irq(gpio_to_irq(GPIO_LPC_INT), chip);
|
|
+ power_supply_unregister(&n516_battery);
|
|
+ input_unregister_device(chip->input);
|
|
+ gpio_free(GPIO_CHARG_STAT_N);
|
|
+ gpio_free(GPIO_LPC_INT);
|
|
+ i2c_set_clientdata(client, NULL);
|
|
+ kfree(chip);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#if CONFIG_PM
|
|
+static int n516_lpc_suspend(struct i2c_client *client, pm_message_t msg)
|
|
+{
|
|
+ if (!the_lpc->can_sleep)
|
|
+ return -EBUSY;
|
|
+
|
|
+ if (device_may_wakeup(&client->dev))
|
|
+ enable_irq_wake(gpio_to_irq(GPIO_LPC_INT));
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int n516_lpc_resume(struct i2c_client *client)
|
|
+{
|
|
+ if (device_may_wakeup(&client->dev))
|
|
+ disable_irq_wake(gpio_to_irq(GPIO_LPC_INT));
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+#else
|
|
+#define n516_lpc_suspend NULL
|
|
+#define n516_lpc_resume NULL
|
|
+#endif
|
|
+
|
|
+
|
|
+static struct i2c_driver n516_lpc_driver = {
|
|
+ .class = I2C_CLASS_HWMON,
|
|
+ .driver = {
|
|
+ .name = "n516-keys",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+ .probe = n516_lpc_probe,
|
|
+ .remove = __devexit_p(n516_lpc_remove),
|
|
+ .detect = n516_lpc_detect,
|
|
+ .id_table = n516_lpc_i2c_ids,
|
|
+ .address_list = normal_i2c,
|
|
+ .suspend = n516_lpc_suspend,
|
|
+ .resume = n516_lpc_resume,
|
|
+};
|
|
+
|
|
+static int __init n516_lpc_init(void)
|
|
+{
|
|
+ return i2c_add_driver(&n516_lpc_driver);
|
|
+}
|
|
+module_init(n516_lpc_init);
|
|
+
|
|
+static void __exit n516_lpc_exit(void)
|
|
+{
|
|
+ i2c_del_driver(&n516_lpc_driver);
|
|
+}
|
|
+module_exit(n516_lpc_exit);
|
|
+
|
|
+MODULE_AUTHOR("Yauhen Kharuzhy");
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_DESCRIPTION("Keys and power controller driver for N516");
|
|
+MODULE_ALIAS("platform:n516-keys");
|