| .. |
|
adm6996.c
|
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
|
2011-05-09 15:21:58 +00:00 |
|
adm6996.h
|
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
|
2011-05-09 15:21:58 +00:00 |
|
ar8216.c
|
generic: ar8216: start aneg on each PHY of the AR8327
|
2012-07-05 08:26:39 +00:00 |
|
ar8216.h
|
generic: ar8216: allow to configure AR8327 LEDs via platform data
|
2012-06-19 10:44:16 +00:00 |
|
ip17xx.c
|
unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.
|
2010-10-12 20:49:35 +00:00 |
|
micrel.c
|
ar71xx: move micrel PHY driver to the generic linux target
|
2012-03-15 09:25:53 +00:00 |
|
mvswitch.c
|
kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
|
2012-05-06 21:19:14 +00:00 |
|
mvswitch.h
|
rename target/linux/generic-2.6 to generic
|
2010-06-26 20:42:58 +00:00 |
|
psb6970.c
|
unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.
|
2010-10-12 20:49:35 +00:00 |
|
rtl8306.c
|
rtl8306: do not overwrite registers in the phy fixup, it could mess up other switches (fixes #8911)
|
2011-04-02 16:35:22 +00:00 |
|
rtl8366_smi.c
|
generic: rtl8366_smi: increase delay after switch hw reset
|
2012-08-10 06:32:00 +00:00 |
|
rtl8366_smi.h
|
generic: rtl836x: add hw_reset field to struct rtl8366_smi
|
2012-08-02 09:54:21 +00:00 |
|
rtl8366rb.c
|
generic: rtl836x: add hw_reset field to struct rtl8366_smi
|
2012-08-02 09:54:21 +00:00 |
|
rtl8366s.c
|
generic: rtl836x: add hw_reset field to struct rtl8366_smi
|
2012-08-02 09:54:21 +00:00 |
|
rtl8367.c
|
generic: rtl836x: add hw_reset field to struct rtl8366_smi
|
2012-08-02 09:54:21 +00:00 |
|
swconfig.c
|
swconfig: use a mutex instead of a spinlock, many swconfig calls sleep
|
2012-03-15 19:32:31 +00:00 |
|
swconfig_leds.c
|
kernel: swconfig: introduce a generic switch LED trigger
|
2011-12-31 15:02:30 +00:00 |
5dd996bc2a