This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
 
 
 
 
 
 
Go to file
Gabor Juhos 02a01a16c7 ramips: extract eeprom for the PCIe wlan module on the RT-N56U
SVN-Revision: 30529
2012-02-14 17:32:45 +00:00
docs kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include quilt: add a NO_RECONFIGURE override for compiling a package without re-running Build/Configure 2012-02-13 15:31:28 +00:00
package bump to 1.12, merge improved lantiq aud_dev driver 2012-02-14 15:05:55 +00:00
scripts patch-specs.sh: gcc 3.4.6 has an additional "(OpenWrt-2.0)" after the version tag, cope with that 2012-01-29 20:19:06 +00:00
target ramips: extract eeprom for the PCIe wlan module on the RT-N56U 2012-02-14 17:32:45 +00:00
toolchain gcc 4.6: port over the missing patch 850-use_shared_libgcc.patch to prevent libgcc crap from leaking into every single binary 2012-02-12 20:25:47 +00:00
tools tools/genext2fs: do not include the host getline.h, it breaks the tool in subtle ways, and the source already has a getline replacement 2012-02-12 16:12:08 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in if CONFIG_BUILD_NLS is selected, compile uClibc with locale support 2012-01-01 15:11:11 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile abort built in prereq target if there is no site config file for the current target 2012-01-19 12:19:28 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
rules.mk rules.mk: filter "." and "./" entries from $PATH, prevents toolchain build issues and likely other problems 2012-01-29 23:34:25 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org