openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

John Crispin 024083a556 generic: add 8139cp fixes, enable hardware csum/tso on 4.0+ This contains two sets of fixes for the 8139cp driver. For all kernel versions older than 4.3, we can apply the fixes from the 4.3-rc4 kernel. In particular, these fix the TX timeout recovery which is causing my Geos to lock up until the hardware watchdog kicks in. For 4.0 and later kernels, we can also apply the additional improvements which are going into 4.4 to fix and enable hardware checksum/TSO offload. Backporting those to older kernels is non-trivial. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> SVN-Revision: 47220		2015-10-19 10:09:54 +00:00
config	cosmetic: remove trailing whitespaces	2015-10-15 22:12:13 +00:00
docs	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
include	kernel: generic: add kernel 4.3	2015-10-11 19:08:08 +00:00
package	base-files: create /var/tmp on boot	2015-10-19 10:09:46 +00:00
scripts	dl_cleanup: Fix linux blacklist	2015-10-07 10:51:18 +00:00
target	generic: add 8139cp fixes, enable hardware csum/tso on 4.0+	2015-10-19 10:09:54 +00:00
toolchain	musl: re-enable des crypto support, fixes pppd MPPE issues	2015-10-01 19:50:06 +00:00
tools	tools/firmware-utils: tplink-safeloader: add version 1.1 support to CPE210/220/510/520	2015-10-19 10:08:50 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	Makefile: move the cleaning of staging_dir/target* from dirclean to clean	2015-06-14 17:47:16 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
feeds.conf.default	feeds.conf.default: add new targets feed	2015-03-19 11:58:35 +00:00
rules.mk	rules.mk: remove GCC 4.4 and GCC 4.5 conditional	2015-08-25 07:45:42 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org