openwrt/target/linux/ath79/image
INAGAKI Hiroshi 81f7bdcb8d ath79: add support for Buffalo BHR-4GRV
Buffalo BHR-4GRV is a wired router, based on Atheros AR7242.

Specification:

- Atheros AR7242
- 64 MB of RAM
- 32 MB of Flash
  - 2x 16 MB SPI-NOR flash
- 5x 10/100/1000 Mbps Ethernet
- 3x LEDs, 2x keys
- 1x USB 2.0 Type-A
- UART header on PCB
  - JP1: Vcc, GND, TX, RX from reset button side

Flash instruction using factory image:

1. Boot the BHR-4GRV normaly and connect the computer to its LAN port
2. Access to
"http://192.168.11.1/cgi-bin/cgi?req=frm&frm=py-db/firmup.html"
with user "bufpy" and password "otdpopy"
3. Select the OpenWrt factory image and click "OK" button to perform
firmware upgrade
4. Wait ~200 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-09-26 20:35:07 +02:00
..
lzma-loader ath79: lzma-loader: sync with ar71xx target 2018-06-06 22:25:53 +02:00
Makefile ath79: add support for Buffalo BHR-4GRV2 2018-08-09 18:44:57 +02:00
common-buffalo.mk ath79: add support for Buffalo WZR-HP-AG300H 2018-09-10 09:35:07 +02:00
common-netgear.mk ath79: mark netgear variables as device specific 2018-08-08 08:11:11 +02:00
common-tp-link.mk ath79: add support for TP-Link RE450 v2 2018-07-02 07:05:33 +02:00
generic-tp-link.mk mac80211: make ath10k-ct the default ath10k 2018-09-26 16:39:44 +02:00
generic-ubnt.mk mac80211: make ath10k-ct the default ath10k 2018-09-26 16:39:44 +02:00
generic.mk ath79: add support for Buffalo BHR-4GRV 2018-09-26 20:35:07 +02:00
nand.mk ath79: add initial nand support for gl-ar300m 2018-06-18 20:29:38 +02:00
tiny-netgear.mk ath79: cleanup netgear wnr612-v2 supported devices 2018-08-08 08:11:11 +02:00
tiny-tp-link.mk ath79: fix TL-MR3020 image metadata 2018-08-19 18:58:04 +02:00
tiny.mk ath79: add support for Buffalo WZR-HP-AG300H 2018-09-10 09:35:07 +02:00