openwrt/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi

158 lines
3.4 KiB
Plaintext

#include "qcom-ipq8064.dtsi"
/ {
model = "Qualcomm IPQ8065";
compatible = "qcom,ipq8065", "qcom,ipq8064";
aliases {
serial0 = &gsbi4_serial;
};
chosen {
stdout-path = "serial0:115200n8";
};
cpus {
qcom,l2 {
qcom,l2-cpufreq = <384000000 600000000 1400000000>;
};
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
};
&gsbi4 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
&pcie0 {
compatible = "qcom,pcie-ipq8064-v2";
};
&pcie1 {
compatible = "qcom,pcie-ipq8064-v2";
};
&pcie2 {
compatible = "qcom,pcie-ipq8064-v2";
};
&sata {
ports-implemented = <0x1>;
};
&smb208_s2a {
regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
};
&smb208_s2b {
regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
};
&ss_phy_0 {
qcom,rx-eq = <2>;
qcom,tx-deamp_3_5db = <32>;
qcom,mpll = <5>;
};
&ss_phy_1 {
qcom,rx-eq = <2>;
qcom,tx-deamp_3_5db = <32>;
qcom,mpll = <5>;
};
&opp_table0 {
/*
* On ipq8065 1.2 ghz freq is not present
* Remove it to make cpufreq work and not
* complain for missing definition
*/
/delete-node/opp-1200000000;
opp-384000000 {
opp-microvolt-speed0-pvs0-v0 = <975000>;
opp-microvolt-speed0-pvs1-v0 = <950000>;
opp-microvolt-speed0-pvs2-v0 = <925000>;
opp-microvolt-speed0-pvs3-v0 = <900000>;
opp-microvolt-speed0-pvs4-v0 = <875000>;
opp-microvolt-speed0-pvs5-v0 = <825000>;
opp-microvolt-speed0-pvs6-v0 = <775000>;
};
opp-600000000 {
opp-microvolt-speed0-pvs0-v0 = <1000000>;
opp-microvolt-speed0-pvs1-v0 = <975000>;
opp-microvolt-speed0-pvs2-v0 = <950000>;
opp-microvolt-speed0-pvs3-v0 = <925000>;
opp-microvolt-speed0-pvs4-v0 = <900000>;
opp-microvolt-speed0-pvs5-v0 = <850000>;
opp-microvolt-speed0-pvs6-v0 = <800000>;
};
opp-800000000 {
opp-microvolt-speed0-pvs0-v0 = <1050000>;
opp-microvolt-speed0-pvs1-v0 = <1025000>;
opp-microvolt-speed0-pvs2-v0 = <1000000>;
opp-microvolt-speed0-pvs3-v0 = <975000>;
opp-microvolt-speed0-pvs4-v0 = <950000>;
opp-microvolt-speed0-pvs5-v0 = <900000>;
opp-microvolt-speed0-pvs6-v0 = <850000>;
};
opp-1000000000 {
opp-microvolt-speed0-pvs0-v0 = <1100000>;
opp-microvolt-speed0-pvs1-v0 = <1075000>;
opp-microvolt-speed0-pvs2-v0 = <1050000>;
opp-microvolt-speed0-pvs3-v0 = <1025000>;
opp-microvolt-speed0-pvs4-v0 = <1000000>;
opp-microvolt-speed0-pvs5-v0 = <950000>;
opp-microvolt-speed0-pvs6-v0 = <900000>;
};
opp-1400000000 {
opp-microvolt-speed0-pvs0-v0 = <1175000>;
opp-microvolt-speed0-pvs1-v0 = <1150000>;
opp-microvolt-speed0-pvs2-v0 = <1125000>;
opp-microvolt-speed0-pvs3-v0 = <1100000>;
opp-microvolt-speed0-pvs4-v0 = <1075000>;
opp-microvolt-speed0-pvs5-v0 = <1025000>;
opp-microvolt-speed0-pvs6-v0 = <975000>;
};
opp-1725000000 {
opp-hz = /bits/ 64 <1725000000>;
opp-microvolt-speed0-pvs0-v0 = <1262500>;
opp-microvolt-speed0-pvs1-v0 = <1225000>;
opp-microvolt-speed0-pvs2-v0 = <1200000>;
opp-microvolt-speed0-pvs3-v0 = <1175000>;
opp-microvolt-speed0-pvs4-v0 = <1150000>;
opp-microvolt-speed0-pvs5-v0 = <1100000>;
opp-microvolt-speed0-pvs6-v0 = <1050000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <100000>;
};
};